Two bugs:
- The change filed are not considered as move, they are re-downloaded
but the old file was not removed from the database. The change in
owncloudpropagator.cpp takes care of removing the old entries.
- Next sync would then remove the file in the server in the old folder
This was not a problem until we start reusing the sync engine, and
that the _renamedFolders map is not cleared. We were before deleting
a non-existing file. But now we delete the actual file.
Also improve the tests to be able to do move on the server.
This include support for file id.
Issue #5192
(cherry picked from commit 85b8ab178e)
We wwer enot connecting to the right signal from the check server
job, and therefore we were not catching the condition in which the
json was invalid. We would then never terminate the ConnectionValidator job.
Note that instanceNotFound is also emited if there is a network error.
The log looked like this:
10:25:51.247 OCC::CheckServerJob::finished: status.php from server is not valid JSON!
10:25:51.248 OCC::CheckServerJob::finished: status.php returns: QMap() QNetworkReply::NetworkError(NoError) Reply: QNetworkReplyHttpImpl(0x2b6a790)
10:25:51.248 OCC::CheckServerJob::finished: No proper answer on QUrl("http://localhost/~owncloud/status.php")
10:26:23.235 OCC::AccountState::checkConnectivity: ConnectionValidator already running, ignoring "owncloud@localhost"
10:26:55.235 OCC::AccountState::checkConnectivity: ConnectionValidator already running, ignoring "owncloud@localhost"
[...]
(cherry picked from commit ff701bd473)
This is not sufficient as it is not working for the Socket API.
Next commit will fix it in another layer.
Also, not ignoring paths that are not inside the folder is wrong
as it might still happen if the name has a different casing
This reverts commit d5a481f132.
(cherry picked from commit 904cd46f75)
If the folder has different case in the settings and in the FS, we should
not ignore all the files. This is important for the files system watcher.
(cherry picked from commit 98268d102f)
Missing deleteLater when the CleanupPollsJob aborts.
This is only a problem if the SyncEngine is kept alive a long time. Which is
usually not the case in the configuration where poll jobs are used.
(cherry picked from commit 3465024898)
I got into a situation where the model would endlessly request the directory
contents from the server because we did not notice yet that the server
is actually in maintenance mode while we were expanding the tree view when
changing the tab to the account or when just expanding it by clicking.
(cherry picked from commit 524220d090)
Once upon a time, the SyncEngine was instantiated once per sync. But now that
the SyncEngine is kept between sync, we need to reset all these variable between
syncs.
Reverts commit 622017adcf
Could be the cause of #5092 and the cost is higher than the benefit if this is the case.
A network request taking more than 30 seconds isn't something unlikely in this world
and shouldn't be a good reason to abort. We should try to untangle the threads
dependencies to properly fix this if possible instead.
It opens a window and connects to a cipher test
page, showing the output from there, that helps for debugging.
The window is enabled by setting the environment variable
OWNCLOUD_SHIBBOLETH_DEBUG
While loading the account, only override the server url if Theme::forceConfigAuthType
is set. This restore the behavior from the client 2.1 for theme that did not
use Theme::forceConfigAuthType.
Issue: owncloud/enterprise#1418
This was removed in 0194ebb222
because it breaks on Linux. However, it looks like it is correct
for Windows. In the meantime the surrounding ifdef has changed
from !Q_OS_MAC to Q_OS_WIN, so reverting it makes sense.
Since the SyncEngine now quits and waits for the discovery thread,
the main thread can enter a deadlock where the discovery thread waits
for its directory result.
Add a 2 seconds timer to the discovery thread wait condition
to limit the deadlock time.
This allows creating a new build simply by hitting F7 in visual studio
and then committing the changed files in the binary submodules without
having to know which files to move where.
Since this isn't yet built together with the rest, we can't reliably
use the client version without having to rebuilt the extension manually
on each release. But it would still be nice to be able to tell if a user
has the right version or not loaded, so instead just tag each update of
the DLLs with a separate release version.
This means that every time we update those binaries we'll have to manually
increment the number in the header, but worst case we'll forget from time
to time but we'll be able to know if we didn't, and know if we can rely on
the number or not.
This disables the workaround 487e1fdca5ee04fc98c1ed77898df70d740967c8
for servers that are new enough to support fine grained permissions
on federated shares.
The consequence is that the 'reshare' permission is now granted by
default and that users can edit permissions on the usual fine-grained
level again.
The way the client deals with servers <9.1 is unchanged.
Use a QMap to avoid using a full hashtable for only a few entries, and
clear the QMap once we're done with the measuring. This saves a few
hundred bytes per job during propagation that would otherwise only be
freed at the end of the sync.
During propagation, we create a line for each file, taking memory, but
we delete all lines passed 2000 right at the beginning of the next sync.
Since the user has little chances of being able to read past those 2000
lines in the log, we might as well keep it capped at 2000 also during
propagation to prevent it from eating memory.
The SyncRunFileLog owned by the Folder must be destroyed after the
SyncEngine since the SyncEngine will abort during destruction, resulting
in all jobs being aborted.
It's possible that this crash only happens with a debug build.
The FolderWatcher inserts files to be marked as SYNC and we
currently assume that all file statuses will be updated by the
following sync. It's however possible that the FolderWatcher
notify us of a change that csync won't consider necessary to
propagate, in which case a new status wouldn't be pushed and
the file manager would continue showing this file as syncing.
Re-push the file status when emptying the dirty files list
before propagating to avoid this issue, most likely the OK
status.
No need to allocate (and initialize to 0) a 10 MiB buffer for each files, even
when most files are much smaller than that.
So make sure the buffer that we allocate is not bigger than the file size.
And Also 10 MiB is a bit big for a buffer. 500 KiB should be more than enough.
(Too big allocations can cause problem because of memory fragmentation and such)
We first need to set the abort flag to csync and then aborting the discovery
job, otherwise, the discovery thread could start a new job in the mean time.
We also need to make sure that the thread has existed before we destroy the
exclude list.
Events from the crash reporter suggest that the QNAM and its
child replies might get deleted before returning from this method
and the only possible cause we can see is that the inner event
loop has something to do with it.
Try keeping a ref on the QNAM while in this method to make sure
that it won't get deleted by the inner event loop.
Same fix as in commit 60c101d9
From the crash reporter:
Crash
EXCEPTION_ACCESS_VIOLATION_READ at 0x4
qnetworkreply.cpp in QNetworkReply::request at line 476
propagateupload.cpp in OCC::PUTFileJob::slotTimeout at line 100
moc_abstractnetworkjob.cpp in OCC::AbstractNetworkJob::qt_static_metacall at line 98
qobject.cpp in QMetaObject::activate at line 3716
moc_qtimer.cpp in QTimer::timeout at line 192
qtimer.cpp in QTimer::timerEvent at line 247
qobject.cpp in QObject::event at line 1267
qapplication.cpp in QApplicationPrivate::notify_helper at line 3722
qapplication.cpp in QApplication::notify at line 3505
qcoreapplication.cpp in QCoreApplication::notifyInternal at line 932
FolderDefinition::save and load escapes the alias. We also need to escape
it when we remove it.
New folder can't be created with alias that needs escaping, but old folder
from old config may still exist, and we must allow user to delete them.
For issue #4927:
On Windows 10, we get a notification after the sync is finished for file that were
just downloaded. The guard we have against our "own changes" are only working when
the sync is running and the OwncloudPropagator still alive.
Setting the Environment variable only for owncloud makes in inconsistant with
other Qt application running at the same time.
The users can still set it themself for the whole desktop if they wish.
Addresses #4840
Previously rejecting any kind of certificate meant that the user
was never asked again, even if the certificate changed.
Now we keep track of which certificates were rejected and ask again
if the ones mentioned in the ssl errors change.
mitmproxy is excellent for testing this.
* Progress: Don't count dirs without propagation jobs #4856
These directory SyncFileItems are necessary for bookkeeping
but should not influence the progress display at all.
* Progress: Skip ignored files #4856
The problem in this case is if we rename the file "xxx" to "invalid\file".
The rename will fail because the new filename constains a slash, and it
will be blacklisted.
But then if the user re-rename the file to "valid_name", then we should
invalidate the blacklist entry and retry to upload. But we did not do
that because renaming don't change the mtime and we did not store the
rename target in the database
IL issue 558
This fixes an issue in which too many jobs are started un parallel
while uploading many files, which could cause too much memory usage as the
chunks are stored in memory.
Probably the fix for #4611
Issue #4855
A typo in the context string made the translation lookup fail.
But also the %Ln was not recognized as a plural form by transifex, so only
the singular was translated
The assert was there to make sure that this case wasn't happening
to eventually be properly tested. Remove the assert for now but this
codepath should eventually be unit tested using this specific situation.
Since the windows implementation first does cache lookups using the
path string, directories need to be passed identically as through
RETRIEVE_FILE_STATUS.
Change the convention to never have a trailing slash for directories
in the protocol. This allows the convention to be applied without
having to access the disk (since we'd need to know if the path is
represented by a directory) and also matches the convention of the
rest of the sync engine. Individual file manager plugins are then
responsible of handling pushed paths as not ending with a trailing
slash.
This also:
- Moves the trailing slash removal logic from the SyncFileStatusTracker
to the SocketApi class
- Remove the unneeded QString::normalized call in fileStatus, since
this should already be done by the FolderWatcher and plugins
Since the statuses are cached and that we can't invalidate the cache,
sending NOP would need to be overwritten by the default OK status
once the client successfully connected. But instead of remembering
which files we NOPed, rather wait until we are ready to sync before
sending the REGISTER_PATH message to the socket API client. It will
also prevent the client from sending unnecessary RETRIEVE_FILE_STATUS
requests.
Also remove AccountState::canSync, since it does the same as
isConnected and syncing is not an account responsibility.
Go through fileStatus like other cases to make sure that all use
cases go through the same code path. This also makes sure to use
lookupProblem which will use lower_bound which is more efficient
for larger sets of sync problems.
This also fixes the issue with lookupProblem that prevented it to
properly match an empty pathToMatch, caused by the fact that the
problem map contains relative paths not starting with a slash.
Make sure that we push the new status when the status of the SyncEngine
changed. SyncEngine::started comes a bit late, only when the propagation
starts, although it's better in this case since child folders will
only switch to Sync in aboutToPropagate.
Also fix an issue with SyncEngine::findSyncItem when using an empty
fileName; this would match and return the wrong item, even though
not currently happening with the code since fileStatus won't call
it with an empty fileName anymore.
As before, we rely on metadata-update SyncFileItem entries for parent
directories to notify us that a directory contains files to propagate,
and to know when all children were propagated through its itemCompleted
signal.
Those metadata SyncFileItems however have a None direction and we need
to add a explicit directory check to show them as Sync.
This fix also handles new files as well as existing ones, so no need
to keep a separate logic for new files.
* Fix nautilus and nemo plugin branding strings.
Fix for owncloud/enterprise#1314
* nautilus plugin: Add a comment why the line needs to stay unchanged.
propagatedownload.cpp:712:35: error: 'seenLockedFile' is a protected member of 'OCC::OwncloudPropagator'
Signals are protected in Qt4 but public in Qt5, mark the class accessing it
as friend when compiling with Qt4
Do the visual stuff from designer.
The previous code that was ment to change the color in red did not work
and changed it to gray instead.
Also I don't see why there should be a frame.
Issue #4773
When a conflict-rename or a temporary-rename fails, notify the
LockWatcher. It'll regularly check whether the file has become
accesible again. When it has, another sync is triggered.
owncloud/enterprise#1288
If the downloaded file is empty but the PROPFIND previously announced it
should not have been empty, this might mean the file was somehow corrupted
because of a bug on the server and that we should therefore not accept
the file.
Normaly we accept a change between the actual size of the file and what we
got during discovery because the file might have been updated to a new version
inbetween. But after this patch we won't accept the file if it was replaced
by an empty file.
Will help for issue #4583
Also requested by IL for issue 548
This uses the file watcher to keep track of files that were modified
in order to assign them the blue icon.
This is transient state that's not persisted across restarts.
After discussion and studying docs again we agreed that
the parameter is not neccessary here as it only affects
the process that opens the handle. And we do not want to
do async stuff.
Before commit 1a51b6718a, the wizard was
making sure folder had an alias but this is no longer the case.
So generate still an unique alias.
Alias is not used in the UI any longer, it's just use for internal purposes.
For issue #4737
As discussed on issue ##4460
Having the quote to be queried on subfolder is wrong in the generic case,
so add a branding option to configure it.
This partially reverts commit ff4cdc3161
In the before-propagate slot, new files that wait to be
pushed to the server are remembered in the _syncProblems
map. That way, the parents show a sync icon properly as
asked for in #4682.
After the item has been transfered properly, the item is
removed from the map again because success is the default.
Added in previous commit from pull request #4663
As discussed, we do not need this option so no need to introduce
a new dependency on the config file in the sync engine
If an app modifies the expiration date (for example the password policy
app) then on more recent versions of the server we will get the share
object back REST style. We should use that info!
Fixes#4409
* Add checksums/supportedTypes and checksums/preferredUploadType
capabilities. The default is that no checksum types are supported.
* Remove the transmissionChecksum config option. Servers must now
use the capabilities to indicate that they are fine with the
client sending checksums.
Note: This intentionally breaks brandings that overrode
Theme::transmissionChecksum. The override must be removed and the
server's capabilities must be adjusted to include the new values.
I don't see a reason we should not allow this. We detect
a "failed stat reply" in other ways. Maybe this was a legacy
csync decision somewhow that is not valid anymore?
The reason is that updateFolderView is invoked by the
emitted signal folderSyncStateChange() anyway.
This will reduce the traffic over the SocketAPI nicely,
maybe this was the reason why it was slower than before.
There were two issues:
* With the refactoring of how Folder and SyncEngine relate, the
ignore_hidden_files flag on the CSync context was reset after
each sync run and not updated from the configuration again.
* The folder watcher failed to enumerate hidden folders and thus
didn't watch for changes inside them. (linux only)
SQLITE_DONE is the indicator for not more query results, which is a legal
thing and not an error condition.
Also, check _getFileRecordQuery for null pointer, as close() wipes it.
The problem with QSet is that the QDateTime was part of
the hash, but that does not make sens as it should be unique
per widget and not per <date, widget>
Instead make it a QHash so there is only one entry per widget.
The idea is that the next call to any database operation will try to
reopen the database through the checkConnect() method. So even if there
was a disconnect trom the db file, this will reestablish the connection.
Imagine tgus scenario on a read only share that you move file from
one location to a new directory in the read only share.
Creating the read only directory fails for permission error.
But we should also restore the files that have been moved.
IL issue 542
Remove all configure_files:
- Move all tests to cpp files
- Use the QTEST_MAIN macro instead of a generated main.cpp
- Include test*.moc in the cpp to let CMAKE_AUTOMOC call moc
- Pass info through add_definitions instead of generating oc_bin.h with them
This makes sure that build errors points to the original test source
file instead of the generated one in the build directory to be able to
jump and fix errors directly from the IDE's error pane.
Bring back the hardcoded status logic for excluded files.
Since the activity log doesn't even mention those files on purpose,
we can't rely on the SyncEngine to notify us about the status of those files.
Looking up a/aa while an error is present in a/aab/aaba would return
a warning status since a/aa is a substring of a/aab.
Fix the issue by checking if the following character is a slash.
This prevents having to define a Problem structure with dubious
operator overloads to accomplish the same.
Also use std::map::lower_bound to quickly iterate over the
list of problems.
* Remove duplicate remote path
* Use thin progress bar
* Move bandwidth and file info to tooltip
* Shorten overall progress message
This also fixes#4562 by making the layout not dependent on the
width of the displayed text.
This also remove all smartness from the SocketApi about the status
of a file and solely use info from the current and last sync.
This simplifies the logic a lot and prevents any discrepancy between
the status shown in the activity log and the one displayed on the
overlay icon of a file.
The main benefit of the additional simplicity is that we are able
to push all new status of a file reliably (including warnings for
parent folders) to properly update the icon on overlay implementations
that don't allow us invalidating the status cache, like on OS X.
Both errors and warning from the last sync are now kept in a set,
which is used to also affect parent folders of an error.
To make sure that errors don't become warning icons on a second
sync, SyncFileItem::_hasBlacklistEntry is also interpreted as an error.
This also renames StatusIgnore to StatusWarning to match this semantic.
SyncEngine::aboutToPropagate is used in favor of SyncEngine::syncItemDiscovered
since the latter is emitted before file permission warnings are set on the
SyncFileItem. SyncEngine::finished is not used since we have all the
needed information in SyncEngine::itemCompleted.
SyncFileStatus' purpose is to track overlay icon status.
Instead of putting comments and default: clauses in switch
on both sides about unused enums, use different enums.
This also remove STATUS_NEW which is the equivalent of
STATUS_SYNC in all shell extension implementations, and
remove STATUS_UPDATED and STATUS_STAT_ERROR which have
the same semantic as STATUS_UPTODATE and STATUS__ERROR.
This currently is no-op code since the socket API isn't notified
that the tainted folder list changed, and the result is the same
since a sync will be triggered within the next 5 seconds and the
modified folder will be shown as SYNC at that point anyway.
Removing the dependency to the file watcher allows moving the
status estimation logic to libsync.
This will help moving the SyncEngine construction in the constructor
and allow moving functionalities from Folder to SyncEngine or its
delegated objects.
If the user tries to install an older version of a branded client
with shell extensions, and also install the 2.1 ownCloud client
side-by-side, both shell extensions DLLs will be registered and might
lead to both DLLs versions being loaded by exlorer, causing a system
crash.
Since we don't support both branded and non-branded shell extensions
to work at the same time, at least make sure to unregister any legacy
CLSID that could cause explorer to load the previous version DLL.
The policy that was said is that if a notification has no action, the
client can and should display a close-button. This patch does it.
In additon to that, the client needs a blacklist of closed notifcations
otherwise they would re-appear next time the server notifications are
fetched again.
Also, changed the cleanup of not-longer-used widgets to be more robust.
If a notification is not longer in the list that comes from the
server, the notification is removed.
That is mainly for the notifications that are created by the
announcement application
Since the quota is a per-folder value, this will make the displayed data
more useful when a single sync folder is configured.
Of course each subfolder could have a different quota again.
The date we receive from the server is an ISO8601 datetime that
includes the offset from UTC. Qt does correctly parse this
information and creates the appropriate QDateTime object.
Calling setTimeSpec(UTC) will force the timezone offset to 0 and
thereby change the referenced point in time to an incorrect one.
Soldiering on with a broken or incomplete response could lead to
incorrect sync behavior.
Since discovery uses LsCol jobs which already handle errors
correctly, this should not have a significant impact.
the size on the server might be different from the size on the client
with certain backend so it should be ignored.
(cherry picked from commit 9222db6df9b19a21e1bea5a238d745d96a6385e3)
In SQLite bindings are not cleared by sqlite3_reset() calls, so
skipping a sqlite3_bind call to create a NULL value doesn't work,
instead the previous value will be written.
To fix this, I clear all bindings in SqlQuery::reset and make sure
to explicitly bind NULL when desired in SqlQuery::bind.
To make sure there's no confusion about SqlQuery::reset and
sqlite3_reset, I rename our method to reset_and_clear_bindings().
(cherry picked from commit 7bd4f95b8c)
In SQLite bindings are not cleared by sqlite3_reset() calls, so
skipping a sqlite3_bind call to create a NULL value doesn't work,
instead the previous value will be written.
To fix this, I clear all bindings in SqlQuery::reset and make sure
to explicitly bind NULL when desired in SqlQuery::bind.
To make sure there's no confusion about SqlQuery::reset and
sqlite3_reset, I rename our method to reset_and_clear_bindings().
The isValid check should be used everywhere the capabilities
are used as the loading of the capabilities is happening
in parallel of the startup, so it is not guaranteed to be
available always.
As interaction is required, the notifications are displayed in a
separate widget above the server activity list.
Note that design and also where we display the notifications can
still be discussed and changed.
If the ownCloud server does not have the activity app enabled,
it returns 999 as status code. If all the configured accounts
do that, this code hides the entire tab with the server
activities.
This is supposed to fix#4533
Helps with small file sync #331
When I benchmarked this, it went up to 6 parallelism and
was about 1/3 faster than the previous fixed 3 parallelism.
Doing more than 6 is dangerous because QNAM limits to 6 TCP
connections and also the server might become a bottleneck.
Should also help for #4081
Previously one could accidentally call Folder::setSyncPaused() and miss
some expected side effects. Before, the correct call was to FolderMan::
slotSetFolderPaused(). Now the setter on Folder has the expected effect.
This will be useful if we ever want to store account-level gui state.
I built this originally because I thought a paused account would be
this kind of state.
The creation doesn't need to be separated from the SyncEngine anymore.
This allows the SyncEngine to be created in fewer steps if we want to
use it in tests.
This moves most of the direct csync code from Folder into the SyncEngine.
The exclude file logic for the context has been wrapped using the
existing ExcludedFiles class as well.
Given that we control all call sites, the only way that this can fail is during
OOM. Also remove the code in csync itself to make sure that it's obvious that
any new error case wouldn't be handled by call sites.
As discussed with Klaas, this seems to be a better compromise.
10MB * 3 prarralel jobs = 30MB in memory, and to retry in case of
disconnection. Which is still reasonable. And might make the upload
almost twice as fast on fast network where the amount of chunk is the
bottleneck (because of more server processing)
Relates to issue #4354
If the PROPFIND return an invalid code (like 200) then we would
not recieve the error signal and we would never sync again.
Found while investigating https://github.com/owncloud/enterprise/issues/1068
The ".sys.admin#recall#" is the recall file and should not be ignored
even if hidden.
The remote discovery do not need to detect hidden files because it
is already detected by csync in all cases. So this avoid code duplication
This script creates the Nemo plugin out of the Nautilus plugin.
Both are source compatible, but need to include the right modules
depending on the name of the file manager.
The script is called by cmake.
ln has a special syntax to create the symlink inside the last path if it's
a directory (or a symlink to a directory).
Also pass --strict to codesign --verify to catch this kind of error.
Users have complained that they don't see the notification when it is
shown and are not aware that their files aren't syncing.
Remove the non-interactive credentials fetch logic and add make sure
that the shibboleth popup will flash in the taskbar instead.
This will still not allow the popup to show in front in all cases,
but this is a compromise that we have to chose.
This reverts commit dcb687929f.
Issue https://github.com/owncloud/enterprise/issues/990
This is the fix for issue #4370
Step to reproduce the bug:
1) have lots of files in directory "dir1"
2) do mkdir dir2 && mv dir1/* dir2
3) DURING the sync (which takes time because of the many moves) do mkdir dir3 && mv dir2/* dir3/
4) observe that files are PUT in the next sync
The problem is that SyncJournalFileRecord::SyncJournalFileRecord will fail to
get the inode after the forst move because the files are already moved on the
filesystem. Normaly it should use the inode from the discovery phase in that
case but that is not working because it comes from the remote node in case of
moves, so the code in SyncEngine::treewalkFile would not set the inode.
Test in https://github.com/owncloud/smashbox/pull/143
Added a new "chunkSize" entry in the General group of the owncloud.cfg
which can be set to the size, in bytes, of the chunks.
This allow user with hude bandwidth to select more optimal chunk size
Issue #4354
QFontMetrics::boundingRect doesn't return the right size for this
font size for some reason, while it works well if we remove the
smaller point size adjustment for the progress font.
To avoid having to debug the font system in Qt just increase the
existing +2px adjustment to +5px so that it renders fine.
Server older than 8.1 cannot cope with invalid char in the filename
so we must not send them from the client. We were already checking
for new files, but not for renames or new directories.
https://github.com/owncloud/enterprise/issues/1009
The height adjustment done to place the button in the middle of the
non-error area was only done for rendering. Make sure that we do the
same adjustment when mapping click events as well.
Also replace some wrong occurences of aliasMargin*2 for margin.
Previously we would fail to start if the directory was not existing.
This was working for relative directory, but it should also work for
absolute ones
https://github.com/owncloud/enterprise/issues/970
The bug seems to be in Windows when it upscales an smaller icon for
HiDPI displays. It works fine if we provide a 256x256 size in the
ico files.
Use the new square icons also used on OS X that removes the share badge
and instead has a share icon only for the OK state. This means that we
can also remove 3 icons and release 3 slots in the registry for
overlay icons (only the first few are actually loaded by explorer).
This also adds a script that uses ImageMagick to convert our SVG icons
to Windows ico files. Since ImageMagick seems to have issue doing
proper antialiasing with pixels on the edge of icons, this also
slightly scale the icons to leave 2px on each edge, out of its
logical 128px width.
Use QT_DEVICE_PIXEL_RATIO=auto on Qt<=5.5 to enable automatic
scale factor settings on Windows. Also move the existing
Qt::AA_EnableHighDpiScaling logic to use the equivalent
QT_AUTO_SCREEN_SCALE_FACTOR=1 environment variable just to
keep the 5.5 and >=5.6 code at the same place.
* Ensure every time a file becomes a directory or the other way around
the item is flagged as INSTRUCTION_TYPE_CHANGE.
* Delete the badly-typed entity if necessary in the propagation jobs.
QPainter::drawText uses the top of the font for the y position of its
rect argument, but uses the baseline when using a point argument.
Also use the margin variable that matches the font used instead of
the aliasMargin and make sure that the margin is only added between
the box and the text once.
The Qt HTTP thread calls authenticationRequired (indirectly) using a
BlockingQueuedConnection. So when we call invalidateToken from slot
connected to this signal and end up calling QNAM::clearAccessCache which
waits on the thread for 5 seconds
Backtraces:
Qt HTTP thread:
#0 0x00007ffff20c707f in pthread_cond_wait@@GLIBC_2.3.2 ()
#1 0x00007ffff43f0c0b in QWaitConditionPrivate::wait
#2 QWaitCondition::wait
#3 0x00007ffff43ea06b in QSemaphore::acquire
#4 0x00007ffff45dcf6f in QMetaObject::activate
[...]
#9 0x00007ffff45dd607 in QMetaObject::activate
#10 0x00007ffff4edbaf7 in QHttpNetworkReply::authenticationRequired
#11 0x00007ffff4e0b2b4 in QHttpNetworkConnectionPrivate::handleAuthenticateChallenge
#12 0x00007ffff4e10753 in QHttpNetworkConnectionChannel::handleStatus
#13 0x00007ffff4e11cc9 in QHttpNetworkConnectionChannel::allDone
#14 0x00007ffff4e14605 in QHttpProtocolHandler::_q_receiveReply
Main Thread:
#0 0x00007ffff20c7428 in pthread_cond_timedwait@@GLIBC_2.3.2 ()
#1 0x00007ffff43f0b56 in QWaitConditionPrivate::wait_relative (time=5000, this=0x136c580)
#2 QWaitConditionPrivate::wait (time=5000, this=0x136c580)
#3 QWaitCondition::wait (this=this@entry=0x136c788, mutex=mutex@entry=0x136c760, time=time@entry=5000)
#4 0x00007ffff43efa6e in QThread::wait (this=<optimized out>, time=time@entry=5000)
#5 0x00007ffff4e1edd3 in QNetworkAccessManagerPrivate::clearCache
#6 0x00007ffff7b6fb03 in OCC::HttpCredentials::invalidateToken()
#7 0x000000000057adb4 in OCC::AccountState::slotInvalidCredentials()
#8 0x000000000057ac76 in OCC::AccountState::slotConnectionValidatorResult(OCC::ConnectionValidator::Status, QStringList const&) ()
#9 0x00000000005ab45c in OCC::AccountState::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)
#10 0x00007ffff45dcd30 in QMetaObject::activate
#11 0x00007ffff7b78671 in OCC::ConnectionValidator::connectionResult(OCC::ConnectionValidator::Status, QStringList) ()
#12 0x00007ffff7ae2514 in OCC::ConnectionValidator::reportResult(OCC::ConnectionValidator::Status) ()
#13 0x00007ffff7ae39b7 in OCC::ConnectionValidator::slotAuthFailed(QNetworkReply*) ()
#14 0x00007ffff7b784a9 in OCC::ConnectionValidator::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) ()
#15 0x00007ffff45dcd30 in QMetaObject::activate
#16 0x00007ffff7b766dc in OCC::AbstractNetworkJob::networkError(QNetworkReply*)
#17 0x00007ffff7af9f6e in OCC::AbstractNetworkJob::slotFinished()
#18 0x00007ffff7b7654d in OCC::AbstractNetworkJob::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) ()
#20 0x00007ffff45dd607 in QMetaObject::activate
#21 0x00007ffff4edd143 in QNetworkReply::finished
#22 0x00007ffff4e3fec7 in QNetworkReplyHttpImplPrivate::finished
#23 0x00007ffff4e41818 in QNetworkReplyHttpImpl::close
#24 0x00007ffff7b7047b in OCC::HttpCredentials::slotAuthentication(QNetworkReply*, QAuthenticator*) ()
#25 0x00007ffff7b79092 in OCC::HttpCredentials::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) ()
#27 0x00007ffff45dd607 in QMetaObject::activate
#28 0x00007ffff4e1d6fb in QNetworkAccessManager::authenticationRequired
#29 0x00007ffff4e1ea07 in QNetworkAccessManagerPrivate::authenticationRequired
#30 0x00007ffff4e3c784 in QNetworkReplyHttpImplPrivate::httpAuthenticationRequired
Another case of Main Thread:
#5 0x00007ffff4e1edd3 in QNetworkAccessManagerPrivate::clearCache
#6 0x00007ffff7b6fb03 in OCC::HttpCredentials::invalidateToken()
#7 0x000000000057b1e4 in OCC::AccountState::slotInvalidCredentials() ()
#8 0x00000000005abb8a in OCC::AccountState::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) ()
#9 0x00007ffff45dcd30 in QMetaObject::activate
#10 0x00007ffff7b76ed5 in OCC::Account::invalidCredentials() ()
#11 0x00007ffff7ad55f5 in OCC::Account::handleInvalidCredentials()
#12 0x00007ffff7afa69a in OCC::AbstractNetworkJob::slotFinished()
#13 0x00007ffff7b7654d in OCC::AbstractNetworkJob::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) ()
#15 0x00007ffff45dd607 in QMetaObject::activate
#16 0x00007ffff4edd143 in QNetworkReply::finished
#17 0x00007ffff4e3fec7 in QNetworkReplyHttpImplPrivate::finished
#18 0x00007ffff4e41818 in QNetworkReplyHttpImpl::close
#19 0x00007ffff7b7047b in OCC::HttpCredentials::slotAuthentication(QNetworkReply*, QAuthenticator*) ()
#20 0x00007ffff7b79092 in OCC::HttpCredentials::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) ()
#22 0x00007ffff45dd607 in QMetaObject::activate
#23 0x00007ffff4e1d6fb in QNetworkAccessManager::authenticationRequired
Now that we have a separate list for files that could not be synced,
we can make sure that it only shows entries for files that are still
not in sync with the server. This allows the user to treat this list
as action items in order to get everything synced, including the
blacklist.
Simply remove the keep-errors logic that was used when the lists were
merged to achieve this result.
This has been fixed in the meanwhile, but we are still shipping
with Qt 5.4. Also, some Linux Distros will still have older Qt
versions.
Addresses issue #4301
The error status of children should only be used for the etag logic.
The SocketApi uses a path matching system to do this and the UI should
report errors only for individual involved files/directories.
This use the previous code by resetting the progress to hide
the progress back and then return errors in the FolderErrorMsg
data role of the folder model.
This also remove the unused FolderRemotePath role, remove FolderStatus
in favor of invalidating all roles in dataChanged and make sure
that the SyncRunning role is transfered properly from the SyncResult
to show the warning icon during sync.
Since the presence of any path in SyncEngine::_syncedItems
would translate in a SYNC status, platforms that don't refresh
all their status cache after an UPDATE_VIEW message like OS X
or Windows would keep displaying that status even after all
files are successfully synchronized.
- Read SyncFileItem::_status to determine the status to display mid-sync
- Match moved paths also to _renameTarget since this might be the
path to match
- Make sure that PropagateDirectory jobs also set SyncFileItem::_status
properly
If all the files bring us to past timestamp, it is possibly a backup
restoration in the server. In which case we want don't want to just
overwrite newer files with the older ones.
Issue #2325
After c3cf6aef7d the invokeMethod calls
should be adjusted to pass the new method arguments.
The result was currently a passing sync with this error message on
the console:
QMetaObject::invokeMethod: No such method OCC::Folder::slotSyncFinished()
The socket api uses native folder separator. We need to use QDir::cleanPath
for anything else so we only work with '/' everywhere else in the code
This fixes the sharing dialog on window.
Issue #4311
Since owncloud 2.1, csync_vio_local_stat was optimized because readdir
would already fetch most of the info. This works for the discovery,
but not later. And we used this function later for symliks and co.
So this fixes the .lnk on windows
Issue #4300
This secret key was used to wipe the database. In the past this was
usefull because of many bugs, but now this is not usefull anymore.
And cause trouble because it also erase the selective sync list.
Issue #4182
set(SOCKETAPI_TEAM_IDENTIFIER_PREFIX""CACHESTRING"SocketApi prefix (including a following dot) that must match the codesign key's TeamIdentifier/Organizational Unit")
RUN zypper --non-interactive --gpg-auto-import-keys refresh
RUN zypper --non-interactive --gpg-auto-import-keys ar http://download.opensuse.org/repositories/windows:/mingw/openSUSE_42.1/windows:mingw.repo
RUN zypper --non-interactive --gpg-auto-import-keys ar http://download.opensuse.org/repositories/isv:ownCloud:toolchains:mingw:win32:2.2/openSUSE_Leap_42.1/isv:ownCloud:toolchains:mingw:win32:2.2.repo
RUN zypper --non-interactive --gpg-auto-import-keys install cmake make mingw32-cross-binutils mingw32-cross-cpp mingw32-cross-gcc \
StrCpy$MUI_FINISHPAGE_SHOWREADME_TEXT_STRING"Toon opmerkingen bij deze uitgave"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Gevonden ${APPLICATION_EXECUTABLE} proces(sen) moet worden gestopt.$\nWilt u dat het installatieprogramma dat voor u doet?"
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"Het te stoppen proces is niet gevonden!"
StrCpy$PageReinstall_NEW_Field_1"Er is een oudere versie van ${APPLICATION_NAME} geïnstalleerd op uw systeem. geadviseerd wordt om de huidige versie te de-installeren voordat de nieuwe versie wordt geïnstalleerd. Selecteer de uit te voeren actie en klik op Verder om door te gaan."
StrCpy$PageReinstall_NEW_Field_2"De-installeren voor installeren"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Kies hoe u ${APPLICATION_NAME} wilt installeren."
StrCpy$PageReinstall_OLD_Field_1"Er is al een recentere versie van ${APPLICATION_NAME} geïnstalleerd! Installeren van een oudere versie wordt niet aangeraden. Als u echt de oudere versie wilt installeren, adviseren we de huidige versie eerst te verwijderen. Kies de actie die u wilt uitvoeren en druk op Verder om door te gaan."
@@ -30,7 +30,7 @@ StrCpy $OPTION_SECTION_SC_QUICK_LAUNCH_Desc "میانبر اجرای سریع ب
StrCpy$UNINSTALLER_FILE_Detail"نوشتن حذف کننده"
StrCpy$UNINSTALLER_REGISTRY_Detail"در حال نوشتن کلید های رجیستری نصاب"
StrCpy$UNINSTALLER_FINISHED_Detail"اتمام"
StrCpy$UNINSTALL_MESSAGEBOX"به نظر نمی رسد نرم افزار ${APPLICATION_NAME} در '$INSTDIR'.$\n$\nنصب شده باشد.\nآیا می خواهید ادامه دهید ( توصیه نشده است ) ؟"
StrCpy$UNINSTALL_MESSAGEBOX"به نظر نمی رسد نرم افزار ${APPLICATION_NAME} در '$INSTDIR'.$\n$\nنصب شده باشد.$\nآیا می خواهید ادامه دهید ( توصیه نشده است ) ؟"
StrCpy$UNINSTALL_ABORT"عمل حذف توسط کاربر متوقف شد"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Havaittiin sovelluksen ${APPLICATION_EXECUTABLE} prosessi (tai prosesseja) jotka pitäisi pysäyttää.\nHaluatko että asennusohjelma pysäyttää nämä puolestasi?"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Havaittiin sovelluksen ${APPLICATION_EXECUTABLE} prosessi (tai prosesseja) jotka pitäisi pysäyttää.$\nHaluatko että asennusohjelma pysäyttää nämä puolestasi?"
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"Tapettavaa prosessia ei löytynyt!"
StrCpy$PageReinstall_NEW_Field_1"Vanhempi versio sovelluksesta ${APPLICATION_NAME} on jo asennettu. On suositeltavaa että poistat vanhan asennuksen ensin. Valitse mikä toiminto suoritetaan ja napsauta Seuraava jatkaaksesi."
StrCpy$UNINSTALL_MESSAGEBOX"Vaikuttaa siltä että sovellus ${APPLICATION_NAME} on asennettu kansioon '$INSTDIR'.\n\nHaluatko jatkaa tästä huolimatta (ei suositeltavaa)?"
StrCpy$UNINSTALL_MESSAGEBOX"Vaikuttaa siltä että sovellus ${APPLICATION_NAME} on asennettu kansioon '$INSTDIR'.$\n$\nHaluatko jatkaa tästä huolimatta (ei suositeltavaa)?"
StrCpy$UNINSTALL_ABORT"Poistaminen keskeytettiin käyttäjän toimesta"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Válaszd ki, hogy szeretnéd telepíteni a következő alkalmazást ${APPLICATION_NAME}."
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Válassza ki, hogy szeretné telepíteni a következő alkalmazást: ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Az ${APPLICATION_NAME} alkalmazás egy újabb verziója már megtalálható a rendszeren. Nem ajánlott egy régebbi verzió telepítése. Ha valóban szeretné a régebbi verziót telepíteni, akkor ajánlott a jelenleg telepített verzió eltávolítása. Válassza ki milyen műveletet szeretne végrehajtani, és nyomja meg a $\"Következő$\" gombot a folytatáshoz."
StrCpy$PageReinstall_SAME_Field_1"Az ${APPLICATION_NAME} alkalmazás ${VERSION} verziója már telepítve van.$↩$\nKérjük válaszd ki milyen műveletet szeretnél végrehajtani, és nyomd meg a „Következő” gombot."
StrCpy$UNINSTALL_MESSAGEBOX"Nem sikerült az ${APPLICATION_NAME} alkalmazás telepítése a '$INSTDIR' könyvtárba.$\n$\nSzeretné mindenképpen folytatni (nem ajánlott)?"
StrCpy$UNINSTALL_ABORT"Az eltávolítást egy felhasználó megszakította"
StrCpy$UNINSTALL_ABORT"Az eltávolítást a felhasználó megszakította"
@@ -30,7 +30,7 @@ StrCpy $OPTION_SECTION_SC_QUICK_LAUNCH_Desc "Scorciatoia per ${APPLICATION_NAME}
StrCpy$UNINSTALLER_FILE_Detail"Creazione del programma di disinstallazione"
StrCpy$UNINSTALLER_REGISTRY_Detail"Scrittura delle chiavi di registro del programma di installazione"
StrCpy$UNINSTALLER_FINISHED_Detail"Completato"
StrCpy$UNINSTALL_MESSAGEBOX"Non sembra che ${APPLICATION_NAME} sia installato nella cartella '$INSTDIR'.$\nVuoi continuare comunque (non consigliato)?"
StrCpy$UNINSTALL_MESSAGEBOX"Non sembra che ${APPLICATION_NAME} sia installato nella cartella '$INSTDIR'.$$\nVuoi continuare comunque (non consigliato)?"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Wybierz jak chcesz zainstalowaæ ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Zainstalowana jest nowsza wersja ${APPLICATION_NAME}! Niezalecane jest instalowanie starszej wersji. Jeœli naprawdê chcesz zainstalowaæ starsz¹ wersjê lepiej najpierw odinstalowaæ obecn¹ aplikacjê. Wybierz operacjê któr¹ chcesz wykonaæ i naciœnij przycisk Dalej."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} jest ju¿ zainstalowany.$\nWybierz operacjê któr¹ chcesz wykonaæ i naciœnij przycisk Dalej."
StrCpy$UAC_ERROR_LOGON_SERVICE"Proces logowania nie jest uruchomiony, przerywam !"
StrCpy$INIT_UNINSTALLER_RUNNING"Dezinstalator ju¿ jest uruchomiony."
StrCpy$SectionGroup_Shortcuts"Skróty"
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
StrCpy$UAC_ERROR_LOGON_SERVICE"Logon service is not running, aborting!"
StrCpy$MUI_FINISHPAGE_SHOWREADME_TEXT_STRING"Mostrar notas de lançamento"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Processos(s) ${APPLICATION_EXECUTABLE} em execução. Estes processos precisam de ser interrompidos.$\\nDeseja que o instalador os termine automaticamente?"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Existem ${APPLICATION_EXECUTABLE} processo(s) em execução que precisa(m) de ser interrompido(s).$\nDeseja que o instalador o(s) termine automaticamente?"
StrCpy$ConfirmEndProcess_KILLING_PROCESSES_TEXT"A terminar os processos ${APPLICATION_EXECUTABLE}."
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"Não foi encontrado o processo a terminar!"
StrCpy$PageReinstall_NEW_Field_1"Uma versão antiga de ${APPLICATION_NAME} está instalada no sistema. É recomendado que você desinstale a versão atual antes de instalar. Selecione a operação que deseja executar e clique em $\"Avançar$\" para continuar."
StrCpy$PageReinstall_NEW_Field_1"Uma versão antiga de ${APPLICATION_NAME} está instalada no sistema. É recomendado que você desinstale a versão atual antes de instalar a mais recente. Selecione a operação que deseja executar e clique em $\"Avançar$\" para continuar."
StrCpy$PageReinstall_NEW_Field_2"Desinstalar antes de instalar"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Escolha como pretende instalar ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Uma versão mais recente do ${APPLICATION_NAME} já está instalada! Não é recomendada a instalação de uma versão mais antiga. Se realmente deseja instalar esta versão, aconselha-se a desinstalação da versão atual primeiro. Selecione a operação que deseja executar e clique em Avançar para continuar."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} já está instalada.\nSelecione a operação que deseja realizar e clique em 'Seguinte' para continuar."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} já está instalada.$\nSelecione a operação que deseja realizar e clique em 'Seguinte' para continuar."
StrCpy$UNINSTALL_MESSAGEBOX"Похоже, что приложение ${APPLICATION_NAME} не установлено в каталог '$INSTDIR'.\nВсе равно продолжить (не рекомендуется)?"
StrCpy$UNINSTALL_MESSAGEBOX"Похоже, что приложение ${APPLICATION_NAME} не установлено в каталог '$INSTDIR'.$\nВсе равно продолжить (не рекомендуется)?"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_TITLE"Program je že nameščen"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Izberite način namestitve programa ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Novejša različica programa ${APPLICATION_NAME} je že nameščena! Ni priporočljivo namestiti starejše. V kolikor želite vseeno nadaljevati z namestitvijo, prej odstranite obstoječo različico. Izberite opravilo in pritisnite gumb za nadaljevanje."
StrCpy$PageReinstall_SAME_Field_1"Program ${APPLICATION_NAME} ${VERSION} je že nameščen.$\n$\nIzberite opravilo, ki ga želite izvesti in kliknite za nadaljevanje."
StrCpy$UAC_INSTALLER_REQUIRE_ADMIN"Namestilnik zahteva skrbniška dovoljenja."
StrCpy$INIT_INSTALLER_RUNNING"Namestilnik je že zagnan."
StrCpy$UAC_UNINSTALLER_REQUIRE_ADMIN"Program za odstranjevanje namestitve zahteva skrbniška dovoljenja."
StrCpy$UAC_ERROR_LOGON_SERVICE"Storitev za prijavo ni zagnana. Opravilo je ustavljeno!"
StrCpy$INIT_UNINSTALLER_RUNNING"Program za odstranjevanje namestitve je že zagnan."
StrCpy$SectionGroup_Shortcuts"Bližnjice"
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
StrCpy$UAC_ERROR_LOGON_SERVICE"Logon service is not running, aborting!"
StrCpy$MUI_FINISHPAGE_SHOWREADME_TEXT_STRING"Mostrar notas de la versión"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Se encontrarion ${APPLICATION_EXECUTABLE} proceso(s) que debe/n ser detenidos.$\"$\\n$\"¿Quiere que el instalador lo haga por usted?"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Se encontrarion ${APPLICATION_EXECUTABLE} proceso(s) que debe/n ser detenidos.$\"$\n$\"¿Quiere que el instalador lo haga por usted?"
StrCpy$ConfirmEndProcess_KILLING_PROCESSES_TEXT"Parando el proceso ${APPLICATION_EXECUTABLE}."
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"Proceso a detener no encontrado!"
StrCpy$PageReinstall_NEW_Field_1"Una versión anterior de ${APPLICATION_NAME} esta instalada en el sistema. Es recomendado que quite esta versión antes de instalar. Elija la operación a realizar y seleccione Siguiente para continuar."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
StrCpy$OPTION_SECTION_SC_SHELL_EXT_SECTION"Integration for Windows Explorer"
StrCpy$OPTION_SECTION_SC_SHELL_EXT_DetailPrint"Installing Integration for Windows Explorer"
StrCpy$UAC_ERROR_LOGON_SERVICE"Logon service is not running, aborting!"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Оберіть, як ви хочете установити ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Знайдено новішу версію ${APPLICATION_NAME}! Ми не рекомендуємо встановлювати стару версію. Якщо ви все ж бажаєте встановити цю версію, спочатку видаліть поточну версію. Оберіть подальшу дію та натисніть $\"Далі$\"."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} вже встановлено.$\n$\nОберіть подальшу дію та натисніть $\"Далі$\" для продовження."
StrCpy$UAC_INSTALLER_REQUIRE_ADMIN"Для установки потрібні права адміністратора, спробуйте ще раз"
StrCpy$INIT_INSTALLER_RUNNING"Установка вже запущена."
StrCpy$UAC_UNINSTALLER_REQUIRE_ADMIN"Для видалення потрібні права адміністратора, спробуйте ще раз"
StrCpy$UAC_ERROR_LOGON_SERVICE"Сервіс авторизації не запущений, припиняю!"
StrCpy$INIT_UNINSTALLER_RUNNING"Програма видалення вже запущено."
StrCpy$SectionGroup_Shortcuts"Ярлики"
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
StrCpy$UAC_ERROR_LOGON_SERVICE"Logon service is not running, aborting!"
@@ -22,3 +22,9 @@ You can change the following configuration settings (must be under the ``[ownClo
-``maxLogLines`` (default: ``20000``) -- Specifies the maximum number of log lines displayed in the log window.
-``chunkSize`` (default: ``5242880``) -- Specifies the chunk size of uploaded files in bytes.
-``promptDeleteAllFiles`` (default: ``true``) -- If a UI prompt should ask for confirmation if it was detected that all files and folders were deleted.
-``notificationRefreshInterval`` (default``300,000``) -- Specifies the default interval of checking for new server notifications in milliseconds.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
