- I checked every occurence of a '%2' and make correct use of the
QString::arg overload that takes several argument instead of chaining
them, because the first argument can contains a '%1'
- I tried to look for every label that they either use plain text or richtext
and escape the user provided strings in there.
By default, followRedirects is true for all requests, to transparently
handle redirections. In the wizard, we have special redirect-handling
code though and that was being skipped.
Setting the flag to false allows the wizard to be aware of redirects
and to handle them in the correct way. Tested with the server described
in
https://github.com/owncloud/administration/tree/master/redirectServer
There's a second bug here, where followRedirects always converts
redirected requests to the GET verb. That means redirected PROPFINDs
will never have worked. This change un-breaks them for the wizard only.
There should be no case that previously worked that stops working now.
The test sets OWNCLOUD_MAX_PARALLEL to 1 to disable parallelism.
But since the max amount of parallelism is twice as much, that does not
work.
So change the way we compute the hardMaximumActiveJob: Use the value of
OWNCLOUD_MAX_PARALLEL to maximize this amount and base the maximum amount
of transfer jobs on it instead of the other way.
A result of this change is that, in case of bandwidth limit, we keep the
default of 6 non-transfer jobs in parallel. I believe that's fine since
the short jobs do not really use bandwidth, so we can still keep the same
amount of small jobs.
This reverts commit e1f5a49c21.
Retrying uploads with insufficent storage errors frequently leads to
high server traffic. See #5537 for links and a sketch of a correct
solution.
If we call
setConfiguration(QNetworkConfiguration());
This sets an invalid configuration on the QNAM.
But later, when we really go online because interfaces are discovered,
QNetworkAccessManagerPrivate::_q_onlineStateChanged is called (with isOnline=true).
And this will set the state to disconnected because customNetworkConfiguration is
true, and the networkConfiguration state is disabled.
The workaround we to fix another bug on Windows in which the default network
configuration was not behaving properly.
The issue on linux is hard to reproduce and only happen in some condition,
but it was reproduced on smashbox when they run two owncloudcmd at the same time.
Issues: #4720 , #3600
We were removing the wholme journal db when the user wanted to keep all files,
But that would also remove the selective sync lists.
We should only remove the metadata table.
Issue #5484
- Put all tests in the bin directory so that DLLs can be loaded
- Add missing exports
- Skip tests that use code depending on zlib
- The "GMT" timezone is named differently, use the int constructor instead
5 tests are still failing, it's not really worth fixing at the moment
since no developper is currently using Windows as its main platform.
On macOS /var is a symlink to /private/var and we have to make sure that we
use the canonical path before and after it enters the code to make sure we
compare paths correctly.
- We need to use a QGuiApplication on macOS or else we don't get notifications
- Switch to use QSignalSpy rather than lists and sleeps
- Use system() for all modifications since we pass kFSEventStreamCreateFlagIgnoreSelf
- Keep using the local process on Windows since it catches its own events
It could be possible that _firstJob is marked as finished if
aborted before its parent PropagateDirectory was marked as finished,
allowing a posted scheduleNextJob call to schedule the child job
in-between.
Should be safer now that we've gone through asserts and assured that
one ones that should be fatal continue to exist in release builds
independently of QT_NO_DEBUG.
Previously, we'd try migrating from legacy settings if reading
the settings failed with an error. Now, we try again after a
couple of seconds and eventually give up.
We can do that because the only changes that were in master but not in 2.3 were the
translations change and documentation change, and the support for the 'M' permission
which we want in 2.3.
The sync engine rely on the 'M' in premission to ask for confirmation
(As requested in issue #5340)
But we only want to ask the premission for the 'root' of the mounting point and not
for every subfolders within it.
So we change the discovery phase in a way that it does not keep the 'M' for
children within the external storage.
Added two checkboxes in the Account Wizard in the advanced page to change the first options.
Also added a checkbox in the general settings to ask for confirmation for external storages.
Theme options allow to hide the checkboxes in the wizard.
As described in issue #5340
We now delete subjobs as their propagation is complete. This allows us
to also release the item by making sure that nothing else is holding a
reference to it.
Remove the stored SyncFileItemVector from SyncEngine and SyncResult
and instead gather the needed info progressively as each itemCompleted
signal is emitted.
This frees some holes on the heap as propagation goes, allowing many
memory allocations without the need of requesting more virtual memory
from the OS, preventing the memory usage from increasingly growing.
This was to catch duplicate emissions for PropagateDirectory but we
don't emit this signal anymore from there.
This fixes a warning about PropagatorJob not being a registered metatype.
This reverts commit fe42c1a818.
Previously if you paused/unpaused a folder for a disconnected account
they would prepare to sync and thus display the 'Waiting...' text. With
this change, folders that can't possibly sync don't show text like
this.
When account connectivity changes, all unpaused folders will be
scheduled anyway.
Stale chunks might be there because a file was removed or would just not
be uploaded, for any reason.
We just start the DeleteJob but we don't care if it success or not.
Relates to https://github.com/owncloud/core/issues/26981
One of the test is testing the case where the file is modified on the server
during the upload. So this test the precondition failed error.
The FakeGetReply logic was modified because resizing a 150MB big QByteArray
by increment of 16k just did not scale when downloading a big file.
Relates to https://github.com/owncloud/core/issues/26981
We do not track the success or error of the DeleteJob because it does not
matter. If it fails, it might be because the chunks were already removed.
If not, the chunks will be stale, but the server must anyway do a few
cleanup from time to time because we do not always remove the chunks
The current logic tried to avoid a DB lookup just to fetch whether
the file is shared or not since that info is already in the
SyncFileItem. The implementation would however need to decrease the
sync count for itself (and parents) before emitting the new status,
thus emitting the OK status for parents before that last child that
ended the propagation for that folder.
Change the implementation to achieve what we want: give the
possibility to decSyncCount to use a pre-fetched sharing state while
still doing the emission for all involved files. This ensures that
the leaf file also gets its status emitted before its parents.
Issue #4797
This addresses the issue only on OS X. It should be stated though, that qtwebkit is not part of the qt5core lib and therefore a requirement for the projectto build in the rest of the OSS
IsMemberOf is called for every file (in the ownCloud directory or not) and
with every instance of OCOverlay (we have 5) when displaying a list of
files in Explorer.
Refactor the code to avoid copying the list of watched directories, as
well as creating a wstring from a PWWSTR for files outside watched
directories.
Also change some calls of begin_with to use isDescendantOf since it
properly handles parent paths not ending with a backslash, which could
lead to SocketAPI queries for sibling folders with a name that starts with
a watched folder name.
Since StateError == 0, if this was the status used when the path
isn't in the map already, the view would not be updated since the
new state would be the same as the default-constructed state in the
map. Fix by explicitly inserting in that case, this also avoid aving
to do two lookups in the map when a path already has an entry.
The client now tries to only push STATUS messages to connections
unless they previously requested it with a RETRIEVE_FILE_STATUS,
but this means that we now have to make sure that a new connection
will rerequest every icon that the user will see on files from that
point on.
To that end, we now send a SHChangeNotify for every file in the cache
when we lose the connection (or on UNREGISTER_PATH) to make sure that
what's on the screen matches what's in the cache. We also remove the
_oldCache logic that made this more difficult to enforce.
The client has been able to reliably push status updates on macOS
for a few versions now, and we don't need it on Windows either. The
_oldCache mechanism was to avoid sending to many update requests
when receiving an UPDATE_VIEW.
Also fixes#4766
The SocketAPI now only sends status pushes for paths requested by the
shell. We have to make sure that Finder doesn't just show the entry
from its cache after a reconnect.
Tell cmake not to escape shell strings adding backslashes before
spaces by passing the VERBATIM optiton. Also add the quotes to
whole command line arguments to prevent quotes from appearing on the
XCode side, because of the VERBATIM option.
This only affects themed clients since the default theme doesn't
have space in its APPLICATION_NAME.
We currently push the SYNC status for all files that will be propagated,
and then the OK status when those files are propagated.
On top of this, we send those statuses to all clients connected, even
if the socket is kept open by an application that only needed to show
a file open dialog. On macOS we're also using an NSConnection which
means that we have to wait for the RPC call to return from the
extension, which makes bulk status changes possibly heavy.
Reduce the time spent needlessly sending status pushes by limiting
them to files requested through that socket since it connected.
To limit the data to store, only remember the parent directory of
files requested, and store those in a bloom filter.
Note that this adds a requirement to shell extensions: they should
make sure that the status cache only contains entries that have been
requested through the socket API. In other words, the status cache
must be empty when each socket client connects to the socket API.
Otherwise the cached icon type will be shown to the user, and the
SocketAPI won't push new status for that file if it didn't receive
a RETRIEVE_FILE_STATUS.
- Use the looked-up method index also for the invocation
- Do the method name concatenation already on QByteArray since we'll
convert anyway
- Use staticMetaObject instead of metaObject()
Shrinks owncloud binary by 24 KB and libowncloudsync by 14 KB.
I don't know if it has influence on memory usage or runtime speed though.
Was worth a try.
As requested in #1067, this commit adds an entry to the FAQ to highlight
the fact that the sync client will never scan greater than 50
sub-directories.
Previously this wasn't happening for errors that were not
NormalErrors because they don't end up in the blacklist.
This revises the resetting logic to be independent of the
error blacklist and make use of UploadInfo::errorCount
instead.
412 errors should reset chunked uploads because they might be
indicative of a checksum error.
Additionally, server bugs might require that additional
errors cause an upload reset. To allow that, a new capability
is added that can be used to advise the client about this.
This displayName() seemed to be based on Account::user() which used
to call _credentials->user(). But then we repurposed user() to be
davUser() and this usage wasn't updated to point back to the username
used for the credentials.
Some custom server use persistent cookies with the auth token. So we should
clear all the cookies when disconnecting.
Account::clearCookieJar is only called from the HTTPCredentials. This funciton
is not used for shibboleth.
There is probably no reasons to keep the HTTP cookie anyway.
Issue #5370
The re-enables the UI, uses Qt API for importing and
stores the certificate/key in the system keychain.
People who had set up client certs need to re-setup the account. This is ok
since it was an undocumented feature anyway.
Fixes#5408#5407.
The problem was that cleanup of the credentials page set the
credentials of the account back to dummy, thereby overriding
things like shib usernames.
This should be broken since a932eac832.
Currently, if get_git_head_revision() doesn't define GIT_SHA1 (which it
doesn't in some cases) it's possible to end up with the following error:
CMake Error at CMakeLists.txt:69 (if):
if given arguments:
"STREQUAL" "GITDIR-NOTFOUND"
Unknown arguments specified
Fix this by making sure both left and right hand arguments to STREQUAL
are always strings, even if GIT_SHA1 is undefined.
Signed-off-by: Kyle Fazzari <kyle@canonical.com>
Otherwise it might happen that the model is inconsistant and this can
lead to crash in the worst case.
(For example, if there was a "fetching" label, and we hide it because it
was a 404. In this case, we would not call begin/endRemoveRows, so the
view could still call the model with an index of row 0, that used to be
for the label, but now correspond to the first element of _subs. And
because _subs is empty, this could lead to crashes)
This could make sure that the network job gets deleted if the parent job gets
deleted, and would avoid crashes like:
Crash: EXCEPTION_ACCESS_VIOLATION_READ at 0xffffffff8b008a04
File "qiodevice.cpp", line 1617, in QIODevice::errorString
File "propagatedownload.cpp", line 264, in OCC::GETFileJob::slotReadyRead
File "moc_propagatedownload.cpp", line 85, in OCC::GETFileJob::qt_static_metacall
File "qobject.cpp", line 3716, in QMetaObject::activate
File "moc_qiodevice.cpp", line 154, in QIODevice::readyRead
File "qnetworkreplyhttpimpl.cpp", line 1045, in QNetworkReplyHttpImplPrivate::replyDownloadData
(#5329)
The csync log level was only set up on startup, and for log files.
Fix the issue by making Logger::isNoop rely on being explicitly activated
for the log window instead of relying on the presence of a connected
signal, and move the csync log level logic in Logger.
The compiler seems to use signed enums and we need to reserve an extra
bit for the sign to avoid the 2 value to overflow and being interpreted
as -2 when read, and thus not being correctly compared to the full enum
value.
Qt now only build it if the system library is available since libmng
isn't active enough to make its security reliable enough. We don't
use that image format ourselves anyway.
Also get rid of the list of different version. We always only support one Qt version
for macOS and Windows, and the list of patches will be based on that supported
version.
OEM configurability creates binaries with OEM names which the .desktop
file doesn't take into account and thus dolphin integration does not
work if OEM changes the binary's name(s).
These changes are now integrated into the .desktop file at compile time.
The rules to select the webdav url are now:
- If the server reports that the new chunking algorithm is working,
always use remote.php/dav/files/<username>
This capability can be overriden with an environment variable
- Otherwise, use the dav path provided by the theme, which defaults to
remote.php/webdav
This means that with the newer server, the branding can no longer override
the webdav URL. If there is still an usecase for the branding to do so, we
need to find another way to override it. But it is now more complicated to
configure as might need include the username and need different endpoint
depending on the operations (chunks or not)
Issue #4007
As the URL might be print on the logs.
Also don't change the scheme from http to owncloud.
This was required before when we were using neon through csync, but now that
we use QNAM for everything we don't need it. The credentials from the account
are used.
We are going to change the webdav path depending on the capabilities.
But the SyncEngine and csync might have been created before the capabilities
are retrieved.
The main raison why we gave the path to the sync engine was to pass it to csync.
But the thing is that csync don't need anymore this url as everything is done by the
discovery classes in libsync that use the network jobs that use the account for the urls.
So csync do not need the remote URI.
shortenFilename in folderstatusmodel.cpp was useless because the string is the
_file of a SyncFileItem which is the relative file name, that name never
starts with owncloud://.
All the csync test creates the folder because csync use to check if the folder
exists. But we don't need to do that anymore
Some listeners detect whether a sync is finished by checking
for isUpdatingEstimates and completedFiles >= totalFiles. But
if a sync didn't transfer any files we never sent signal
with these values. Now we do.
The "S" in the permission is only for the "Shared with me" files.
It is only used to show the shared status in the overlay icons.
But we also wish to show the shared status for files that are shared
"by" the users. We can find that out using the 'share-types' webdav
property. If set, then we are sharing the object.
We fake a 'S' in the permission as for our purpose, they mean the same.
Issue #4788
As the file can be some hunreds of megabytes, allocating such big arrays may
cause problems.
Also make the timeout a bit bigger so the test can rununder valgrind.
For the reanslation. Now transifex should be updated to update master.
This should normally be the last merge from 2.2
Conflicts:
mirall.desktop.in
translations/client_sl.ts
translations/client_th.ts
The ownCloud 9.1 server has a data-fingerprint property that the admin must
change in case of backup restoration. When this change, the client understands
that a backup was restored, and will generate conflict files and re-upload
new files.
The heuristics based system checks that there is at least two files wose mtime
is put back in the past and no files that goes forward. In that case we ask the
user before creating the conflicts.
This commit disable the heuristics for newer server that have the data-fingerpint.
And change the heuristics to two hours because we want to avoid false positive due
to some clock error, and that 2 hours of lost due to backup restoration is probably
not so bad.
We only ask the user in the heuristics based aproach so in practice this mean that
the "backup-detected" dialog will no longer appear with newer server.
Relates issues #5260, #5109
Caja is a fork of nautilus maintained by the Mate project.
This adds a script to create a caja plugin from the nautilus plugin.
It replaces all occurences of nautilus with caja (case sensitive).
This is done in the same way the nemo plugin is generated from the nautilus one.
Issue #4608
* folder state is either OK or SYNC usually
* this extension does not know about if a folder is shareable
* a OK folder is shareable
* a SYNC folder could be uploaded or not uploaded
* this commit looks into file entries below this folder
* if one exists with state OK or SYNC
this folder must have been uploaded
* better would be if the server (gui) tells us
if the folder is uploaded
Otherwise progress listeners think it's still the last-completed
item when the next sync starts. This lead to spurious entries in
the "Recent Changes" list.
Update from commit 05ce8a23cdc12e825532dc6de06c267fb8d48b4f from
https://github.com/dragotin/QProgressIndicator
Which itself is forked from commit e5ba0fd09bfd43b067ee3646d70b294c7efcb558 from
upstream, with additional license header.
It was relicensed to MIT according to
14bb9d10e2
Relates to issues #5180 and #5184
Issue #5224
Two problems:
- In the discovery phase, we need to check the selective sync entries of
the source path in case of renames.
- When the rename is done, we need to actually update the black list in the
database.
Some tests (such as FolderManTest) can polute the config file with invalid
accounts.
(That's because most of the code, (even in libsync) always instentiate a ConfigFile)
The crash reporter shows a lot of crashes in sqlite3_clear_bindings
which seems to indicate that _stmt is null. We should guard against
a null value in order to avoid crashing.
This should only happen if the prepare call fails. We don't usually
check the return value of the prepare call, but if _stmt is null, the
exec call should return false, not true. We check the result of the
exec call, so this should then abort the sync with an error, rather
than crashing.
- Use a white icon if the context menu is visible.
- Enable `QIcon::setIsMask` if compiled on Qt >= 5.6 to allow automatic
macOS color handling.
- No changes if the colored icons are used.
One local folder can now be configured as sync target for multiple
accounts as long as their url and user differ.
Also this patch accepts that the sync folder is behind a symlink.
Also this patch fixes a bug that before the user input was taken
canonically which was not working for the symlink handling.
The filename must not be wiped in csync_commit as that is
happening after every sync. It is only set once in the
constructor of the SyncEngine in csync_init().
Instead of using the regular selective-sync UI (where it's unclear what
the "Cancel" button would even mean in this context), provide a
different set of buttons that allow the user to quickly synchronize
all pending big folders, none of them, or perform manual changes
as usual.
Tray: Workaround collection
* QDBus workaround for Qt 5.5.0 only, there were reports of the tray
working fine with 5.5.1. #5164
* OWNCLOUD_FORCE_QDBUS_TRAY_WORKAROUND to force the workaround on an off
* OWNCLOUD_TRAY_UPDATE_WHILE_VISIBLE to enable or disable updating of
the menu while it's visible - disable by default due to problems on OSX and Xubuntu.
* Track the visibility of the tray menu with aboutToShow/aboutToHide
only on OSX - the aboutToHide signal doesn't trigger reliably on linux
* Refactor such that setupContextMenu is different from updateContextMenu
* Don't use on-demand updating of the tray menu when the qdbus workaround
is active, instead to occasional (30s) updates of the tray menu.
We ignored csync log, but we also need to silent Qt debug output.
We need to ignore it at the very begining because there might be
qDebug also in account creation.
Issue #5196
Two bugs:
- The change filed are not considered as move, they are re-downloaded
but the old file was not removed from the database. The change in
owncloudpropagator.cpp takes care of removing the old entries.
- Next sync would then remove the file in the server in the old folder
This was not a problem until we start reusing the sync engine, and
that the _renamedFolders map is not cleared. We were before deleting
a non-existing file. But now we delete the actual file.
Also improve the tests to be able to do move on the server.
This include support for file id.
Issue #5192
In case of the root directory, it may happen that the _item
is empty and the _item->_status is NoStatus. But we still need to report
the proper success or error of the whole propagation. We should really
use _hasError for that. However, _hasError is also defined to NoStatus
if there was no error, so in that case we need to set Success.
This fixes the problem in which the data-fingerprint is not saved on the
database because the SyncEngine think that the sync failed. (Issue #5185)
We wwer enot connecting to the right signal from the check server
job, and therefore we were not catching the condition in which the
json was invalid. We would then never terminate the ConnectionValidator job.
Note that instanceNotFound is also emited if there is a network error.
The log looked like this:
10:25:51.247 OCC::CheckServerJob::finished: status.php from server is not valid JSON!
10:25:51.248 OCC::CheckServerJob::finished: status.php returns: QMap() QNetworkReply::NetworkError(NoError) Reply: QNetworkReplyHttpImpl(0x2b6a790)
10:25:51.248 OCC::CheckServerJob::finished: No proper answer on QUrl("http://localhost/~owncloud/status.php")
10:26:23.235 OCC::AccountState::checkConnectivity: ConnectionValidator already running, ignoring "owncloud@localhost"
10:26:55.235 OCC::AccountState::checkConnectivity: ConnectionValidator already running, ignoring "owncloud@localhost"
[...]
- Replace functions that are provided by MinGW with a Win32-based
implementation
- Explicitly export needed symbols from ocsync.dll
- Rename share.h to sharemanager.h since the name clashes with one
of the Windows headers and get included from there
- Remove the timestamp from the fallback csync stderr logging, it's
not used since we always provide a log callback
These are not understood by owncloud yet, but were requested for CernBox
OC-Total-Length in the MKCOL: The full lenght of the file
OC-Chunk-Offset in the PUT: The offset within the file in which this chunk belongs
OC-Checksum in the MOVE: The transission checksum
Two bugs:
- The change filed are not considered as move, they are re-downloaded
but the old file was not removed from the database. The change in
owncloudpropagator.cpp takes care of removing the old entries.
- Next sync would then remove the file in the server in the old folder
This was not a problem until we start reusing the sync engine, and
that the _renamedFolders map is not cleared. We were before deleting
a non-existing file. But now we delete the actual file.
Also improve the tests to be able to do move on the server.
This include support for file id.
Issue #5192
(cherry picked from commit 85b8ab178e)
We wwer enot connecting to the right signal from the check server
job, and therefore we were not catching the condition in which the
json was invalid. We would then never terminate the ConnectionValidator job.
Note that instanceNotFound is also emited if there is a network error.
The log looked like this:
10:25:51.247 OCC::CheckServerJob::finished: status.php from server is not valid JSON!
10:25:51.248 OCC::CheckServerJob::finished: status.php returns: QMap() QNetworkReply::NetworkError(NoError) Reply: QNetworkReplyHttpImpl(0x2b6a790)
10:25:51.248 OCC::CheckServerJob::finished: No proper answer on QUrl("http://localhost/~owncloud/status.php")
10:26:23.235 OCC::AccountState::checkConnectivity: ConnectionValidator already running, ignoring "owncloud@localhost"
10:26:55.235 OCC::AccountState::checkConnectivity: ConnectionValidator already running, ignoring "owncloud@localhost"
[...]
(cherry picked from commit ff701bd473)
This is not sufficient as it is not working for the Socket API.
Next commit will fix it in another layer.
Also, not ignoring paths that are not inside the folder is wrong
as it might still happen if the name has a different casing
This reverts commit d5a481f132.
(cherry picked from commit 904cd46f75)
Previously, we only checked the hiddenness of the target file and
ignored the hiddenness of the containing folders. This lead to
undesired behavior when people synced their home folders and there
was a folder watcher notification for a non-hidden file in one of
the hidden folders.
I'm not fully sure why, but sometimes notifications for .foo/bar were
already ignored, but notifications for .foo/bar/car were not. This may
be because of how we set up the FolderWatchers on Linux.
The new behavior is to check all path components for hiddenness, up
until the base path (but excluding the base path, so using a hidden
folder as a sync folder will work).
This is important because we compare the paths from the file system watcher if it
starts with this path.
Same in the SocketAPI where we need to use cannonical paths in the REGISTER_PATH command,
as the plugin themself will do this comparison.
Issue #5116
This is not sufficient as it is not working for the Socket API.
Next commit will fix it in another layer.
Also, not ignoring paths that are not inside the folder is wrong
as it might still happen if the name has a different casing
This reverts commit d5a481f132.
If the folder has different case in the settings and in the FS, we should
not ignore all the files. This is important for the files system watcher.
(cherry picked from commit 98268d102f)
Missing deleteLater when the CleanupPollsJob aborts.
This is only a problem if the SyncEngine is kept alive a long time. Which is
usually not the case in the configuration where poll jobs are used.
(cherry picked from commit 3465024898)
I got into a situation where the model would endlessly request the directory
contents from the server because we did not notice yet that the server
is actually in maintenance mode while we were expanding the tree view when
changing the tab to the account or when just expanding it by clicking.
(cherry picked from commit 524220d090)
I got into a situation where the model would endlessly request the directory
contents from the server because we did not notice yet that the server
is actually in maintenance mode while we were expanding the tree view when
changing the tab to the account or when just expanding it by clicking.
Before it was in Folder, however, the command line client does not
have the Folder class. To not duplicate code, the function to generate
the sync journal name went to SyncEngine class.
This would happen if the directory would first need to be created
through an mkdir propagation job. This job's itemCompleted signal
would trigger the directory to show as SYNC even though its children
are still propagating.
Fix the issue by tracking the sync count for each file, affecting
its parents. This allows us to get rid of the O(n) vector lookup
for each status query, and properly track the hierachical sync
status of a directory.
This also removes the itemCompleted signal emission from the
PropagateDirectory job. Since we only needed for overlay icons, and
since this job doesn't do any direct propagation, we can remove it
to ensure that we won't call itemCompleted twice for the item attached
to Propagate*Mkdir jobs (since the PropagateDirectory is backed by
the same SyncFileItem, instruction and status).
The current way of tracking the need to update the metadata without
propagation using a separate flag makes it difficult to track
priorities between the local and remote tree. The logic is also
difficult to logically cover since the possibilities matrix isn't
100% covered, leaving the flag only used in a few situations
(mostly involving folders, but not only).
The reason we need to change this is to be able to track the sync
state of files for overlay icons. The instruction alone can't be
used since CSYNC_INSTRUCTION_SYNC is used for folders even though
they won't be propagated. Removing this logic is however not possible
without using something else than CSYNC_INSTRUCTION_NONE since too
many codepath interpret (rightfully) this as meaning "nothing to do".
This patch adds a new CSYNC_INSTRUCTION_UPDATE_METADATA instruction
to let the update and reconcile steps tell the SyncEngine to update
the metadata of a file without any propagation. Other flags are left
to be interpretted by the implementation as implicitly needing
metadata update or not, as this was already the case for most file
propagation jobs. For example, CSYNC_INSTRUCTION_NEW for directories
now also implicitly update the metadata.
Since it's not impossible for folders to emit CSYNC_INSTRUCTION_SYNC
or CSYNC_INSTRUCTION_CONFLICT, the corresponding code paths in the
sync engine have been removed.
Since the reconcile step can now know if the local tree needs metadata
update while the remote side might want propagation, the
localMetadataUpdate logic in SyncEngine::treewalkFile now simply use
a CSYNC_INSTRUCTION_UPDATE_METADATA for the local side, which is now
implemented as a different database query.
Add a missing call that we currently only do in slotItemCompleted.
This would normally only affect the first sync and would have
gotten properly update at the end of the sync anyway.
To be able to test the SyncEngine efficiently, a set of server
mocking classes have been implemented on top of QNetworkAccessManager.
The local disk side hasn't been mocked since this would require adding
a large abstraction layer in csync. The SyncEngine is instead pointed
to a different temporary dir in each test and we test by interacting
with files in this directory instead.
The FakeFolder object wraps the SyncEngine with those abstractions
and allow controlling the local files, and the fake remote state
through the FileModifier interface, using a FileInfo tree structure
for the remote-side implementation as well as feeding and comparing
the states on both side in tests.
Tests run fast and require no setup to be run, but each server feature
that we want to test on the client side needs to be implemented in
this fake objects library. For example, the OC-FileId header isn't
set as of this commit, and we can't test the file move logic properly
without implementing it first.
The TestSyncFileStatusTracker tests already contain a few QEXPECT_FAIL
for what I esteem being issues that need to be fixed in order to catch
up on our test coverage without making this patch too huge.
The open function expects a URL, passing only the directory name would
lead HTTP::DAV to try looking it as an hostname on the network and
only return after it timed out.
This is a move away from the original policy where jobs
would only follow redirects in special cases.
Two restrictions are in place:
1. We do not allow protocol downgrades (https -> http)
2. We stop redirects after we find them looping (e.g. old = new url, or
indirectly when looping 10 times).
This is closer to RFC conforming behavior, although currently
we will treat 301 replies like they were 302. This is for a separate
commit.
Error handling (and display) also needs improvement.
Addresses #2791
Once upon a time, the SyncEngine was instantiated once per sync. But now that
the SyncEngine is kept between sync, we need to reset all these variable between
syncs.
Reverts commit 622017adcf
Could be the cause of #5092 and the cost is higher than the benefit if this is the case.
A network request taking more than 30 seconds isn't something unlikely in this world
and shouldn't be a good reason to abort. We should try to untangle the threads
dependencies to properly fix this if possible instead.
It opens a window and connects to a cipher test
page, showing the output from there, that helps for debugging.
The window is enabled by setting the environment variable
OWNCLOUD_SHIBBOLETH_DEBUG
Missing deleteLater when the CleanupPollsJob aborts.
This is only a problem if the SyncEngine is kept alive a long time. Which is
usually not the case in the configuration where poll jobs are used.
While loading the account, only override the server url if Theme::forceConfigAuthType
is set. This restore the behavior from the client 2.1 for theme that did not
use Theme::forceConfigAuthType.
Issue: owncloud/enterprise#1418
This was removed in 0194ebb222
because it breaks on Linux. However, it looks like it is correct
for Windows. In the meantime the surrounding ifdef has changed
from !Q_OS_MAC to Q_OS_WIN, so reverting it makes sense.
Since the SyncEngine now quits and waits for the discovery thread,
the main thread can enter a deadlock where the discovery thread waits
for its directory result.
Add a 2 seconds timer to the discovery thread wait condition
to limit the deadlock time.
This allows creating a new build simply by hitting F7 in visual studio
and then committing the changed files in the binary submodules without
having to know which files to move where.
Since this isn't yet built together with the rest, we can't reliably
use the client version without having to rebuilt the extension manually
on each release. But it would still be nice to be able to tell if a user
has the right version or not loaded, so instead just tag each update of
the DLLs with a separate release version.
This means that every time we update those binaries we'll have to manually
increment the number in the header, but worst case we'll forget from time
to time but we'll be able to know if we didn't, and know if we can rely on
the number or not.
This disables the workaround 487e1fdca5ee04fc98c1ed77898df70d740967c8
for servers that are new enough to support fine grained permissions
on federated shares.
The consequence is that the 'reshare' permission is now granted by
default and that users can edit permissions on the usual fine-grained
level again.
The way the client deals with servers <9.1 is unchanged.
Use a QMap to avoid using a full hashtable for only a few entries, and
clear the QMap once we're done with the measuring. This saves a few
hundred bytes per job during propagation that would otherwise only be
freed at the end of the sync.
During propagation, we create a line for each file, taking memory, but
we delete all lines passed 2000 right at the beginning of the next sync.
Since the user has little chances of being able to read past those 2000
lines in the log, we might as well keep it capped at 2000 also during
propagation to prevent it from eating memory.
The SyncRunFileLog owned by the Folder must be destroyed after the
SyncEngine since the SyncEngine will abort during destruction, resulting
in all jobs being aborted.
It's possible that this crash only happens with a debug build.
The FolderWatcher inserts files to be marked as SYNC and we
currently assume that all file statuses will be updated by the
following sync. It's however possible that the FolderWatcher
notify us of a change that csync won't consider necessary to
propagate, in which case a new status wouldn't be pushed and
the file manager would continue showing this file as syncing.
Re-push the file status when emptying the dirty files list
before propagating to avoid this issue, most likely the OK
status.
No need to allocate (and initialize to 0) a 10 MiB buffer for each files, even
when most files are much smaller than that.
So make sure the buffer that we allocate is not bigger than the file size.
And Also 10 MiB is a bit big for a buffer. 500 KiB should be more than enough.
(Too big allocations can cause problem because of memory fragmentation and such)
We first need to set the abort flag to csync and then aborting the discovery
job, otherwise, the discovery thread could start a new job in the mean time.
We also need to make sure that the thread has existed before we destroy the
exclude list.
Events from the crash reporter suggest that the QNAM and its
child replies might get deleted before returning from this method
and the only possible cause we can see is that the inner event
loop has something to do with it.
Try keeping a ref on the QNAM while in this method to make sure
that it won't get deleted by the inner event loop.
Same fix as in commit 60c101d9
From the crash reporter:
Crash
EXCEPTION_ACCESS_VIOLATION_READ at 0x4
qnetworkreply.cpp in QNetworkReply::request at line 476
propagateupload.cpp in OCC::PUTFileJob::slotTimeout at line 100
moc_abstractnetworkjob.cpp in OCC::AbstractNetworkJob::qt_static_metacall at line 98
qobject.cpp in QMetaObject::activate at line 3716
moc_qtimer.cpp in QTimer::timeout at line 192
qtimer.cpp in QTimer::timerEvent at line 247
qobject.cpp in QObject::event at line 1267
qapplication.cpp in QApplicationPrivate::notify_helper at line 3722
qapplication.cpp in QApplication::notify at line 3505
qcoreapplication.cpp in QCoreApplication::notifyInternal at line 932
FolderDefinition::save and load escapes the alias. We also need to escape
it when we remove it.
New folder can't be created with alias that needs escaping, but old folder
from old config may still exist, and we must allow user to delete them.
For issue #4927:
On Windows 10, we get a notification after the sync is finished for file that were
just downloaded. The guard we have against our "own changes" are only working when
the sync is running and the OwncloudPropagator still alive.
Setting the Environment variable only for owncloud makes in inconsistant with
other Qt application running at the same time.
The users can still set it themself for the whole desktop if they wish.
Addresses #4840
Previously rejecting any kind of certificate meant that the user
was never asked again, even if the certificate changed.
Now we keep track of which certificates were rejected and ask again
if the ones mentioned in the ssl errors change.
mitmproxy is excellent for testing this.
* Progress: Don't count dirs without propagation jobs #4856
These directory SyncFileItems are necessary for bookkeeping
but should not influence the progress display at all.
* Progress: Skip ignored files #4856
The problem in this case is if we rename the file "xxx" to "invalid\file".
The rename will fail because the new filename constains a slash, and it
will be blacklisted.
But then if the user re-rename the file to "valid_name", then we should
invalidate the blacklist entry and retry to upload. But we did not do
that because renaming don't change the mtime and we did not store the
rename target in the database
IL issue 558
This fixes an issue in which too many jobs are started un parallel
while uploading many files, which could cause too much memory usage as the
chunks are stored in memory.
Probably the fix for #4611
Issue #4855
A typo in the context string made the translation lookup fail.
But also the %Ln was not recognized as a plural form by transifex, so only
the singular was translated
The assert was there to make sure that this case wasn't happening
to eventually be properly tested. Remove the assert for now but this
codepath should eventually be unit tested using this specific situation.
Since the windows implementation first does cache lookups using the
path string, directories need to be passed identically as through
RETRIEVE_FILE_STATUS.
Change the convention to never have a trailing slash for directories
in the protocol. This allows the convention to be applied without
having to access the disk (since we'd need to know if the path is
represented by a directory) and also matches the convention of the
rest of the sync engine. Individual file manager plugins are then
responsible of handling pushed paths as not ending with a trailing
slash.
This also:
- Moves the trailing slash removal logic from the SyncFileStatusTracker
to the SocketApi class
- Remove the unneeded QString::normalized call in fileStatus, since
this should already be done by the FolderWatcher and plugins
Since the statuses are cached and that we can't invalidate the cache,
sending NOP would need to be overwritten by the default OK status
once the client successfully connected. But instead of remembering
which files we NOPed, rather wait until we are ready to sync before
sending the REGISTER_PATH message to the socket API client. It will
also prevent the client from sending unnecessary RETRIEVE_FILE_STATUS
requests.
Also remove AccountState::canSync, since it does the same as
isConnected and syncing is not an account responsibility.
Go through fileStatus like other cases to make sure that all use
cases go through the same code path. This also makes sure to use
lookupProblem which will use lower_bound which is more efficient
for larger sets of sync problems.
This also fixes the issue with lookupProblem that prevented it to
properly match an empty pathToMatch, caused by the fact that the
problem map contains relative paths not starting with a slash.
Make sure that we push the new status when the status of the SyncEngine
changed. SyncEngine::started comes a bit late, only when the propagation
starts, although it's better in this case since child folders will
only switch to Sync in aboutToPropagate.
Also fix an issue with SyncEngine::findSyncItem when using an empty
fileName; this would match and return the wrong item, even though
not currently happening with the code since fileStatus won't call
it with an empty fileName anymore.
As before, we rely on metadata-update SyncFileItem entries for parent
directories to notify us that a directory contains files to propagate,
and to know when all children were propagated through its itemCompleted
signal.
Those metadata SyncFileItems however have a None direction and we need
to add a explicit directory check to show them as Sync.
This fix also handles new files as well as existing ones, so no need
to keep a separate logic for new files.
The pull request should have been done against the 2.2 branch, and
the branch would better be merged instead of squashed to keep the
history easier to lookup.
This reverts commit 0469236d80.
* Fix nautilus and nemo plugin branding strings.
Fix for owncloud/enterprise#1314
* nautilus plugin: Add a comment why the line needs to stay unchanged.
propagatedownload.cpp:712:35: error: 'seenLockedFile' is a protected member of 'OCC::OwncloudPropagator'
Signals are protected in Qt4 but public in Qt5, mark the class accessing it
as friend when compiling with Qt4
* Fix the sync status push for parent directories #4682
As before, we rely on metadata-update SyncFileItem entries for parent
directories to notify us that a directory contains files to propagate,
and to know when all children were propagated through its itemCompleted
signal.
Those metadata SyncFileItems however have a None direction and we need
to add a explicit directory check to show them as Sync.
This fix also handles new files as well as existing ones, so no need
to keep a separate logic for new files.
* Fix the root item sync status #4682
Make sure that we push the new status when the status of the SyncEngine
changed. SyncEngine::started comes a bit late, only when the propagation
starts, although it's better in this case since child folders will
only switch to Sync in aboutToPropagate.
Also fix an issue with SyncEngine::findSyncItem when using an empty
fileName; this would match and return the wrong item, even though
not currently happening with the code since fileStatus won't call
it with an empty fileName anymore.
* Simplify the root status logic
Go through fileStatus like other cases to make sure that all use
cases go through the same code path. This also makes sure to use
lookupProblem which will use lower_bound which is more efficient
for larger sets of sync problems.
This also fixes the issue with lookupProblem that prevented it to
properly match an empty pathToMatch, caused by the fact that the
problem map contains relative paths not starting with a slash.
* Avoid a SyncFileStatusTracker private overload with the same name
Having an overload as a private function in the same class makes the
code harder to follow. Rename the private fileStatus to syncFileItemStatus.
* [osx] Fix missing overlay icons on client startup
Since the statuses are cached and that we can't invalidate the cache,
sending NOP would need to be overwritten by the default OK status
once the client successfully connected. But instead of remembering
which files we NOPed, rather wait until we are ready to sync before
sending the REGISTER_PATH message to the socket API client. It will
also prevent the client from sending unnecessary RETRIEVE_FILE_STATUS
requests.
Also remove AccountState::canSync, since it does the same as
isConnected and syncing is not an account responsibility.
Do the visual stuff from designer.
The previous code that was ment to change the color in red did not work
and changed it to gray instead.
Also I don't see why there should be a frame.
Issue #4773
When a conflict-rename or a temporary-rename fails, notify the
LockWatcher. It'll regularly check whether the file has become
accesible again. When it has, another sync is triggered.
owncloud/enterprise#1288
If the downloaded file is empty but the PROPFIND previously announced it
should not have been empty, this might mean the file was somehow corrupted
because of a bug on the server and that we should therefore not accept
the file.
Normaly we accept a change between the actual size of the file and what we
got during discovery because the file might have been updated to a new version
inbetween. But after this patch we won't accept the file if it was replaced
by an empty file.
Will help for issue #4583
Also requested by IL for issue 548
This uses the file watcher to keep track of files that were modified
in order to assign them the blue icon.
This is transient state that's not persisted across restarts.
After discussion and studying docs again we agreed that
the parameter is not neccessary here as it only affects
the process that opens the handle. And we do not want to
do async stuff.
Before commit 1a51b6718a, the wizard was
making sure folder had an alias but this is no longer the case.
So generate still an unique alias.
Alias is not used in the UI any longer, it's just use for internal purposes.
For issue #4737
As discussed on issue ##4460
Having the quote to be queried on subfolder is wrong in the generic case,
so add a branding option to configure it.
This partially reverts commit ff4cdc3161
In the before-propagate slot, new files that wait to be
pushed to the server are remembered in the _syncProblems
map. That way, the parents show a sync icon properly as
asked for in #4682.
After the item has been transfered properly, the item is
removed from the map again because success is the default.
Added in previous commit from pull request #4663
As discussed, we do not need this option so no need to introduce
a new dependency on the config file in the sync engine
If an app modifies the expiration date (for example the password policy
app) then on more recent versions of the server we will get the share
object back REST style. We should use that info!
Fixes#4409
* Add checksums/supportedTypes and checksums/preferredUploadType
capabilities. The default is that no checksum types are supported.
* Remove the transmissionChecksum config option. Servers must now
use the capabilities to indicate that they are fine with the
client sending checksums.
Note: This intentionally breaks brandings that overrode
Theme::transmissionChecksum. The override must be removed and the
server's capabilities must be adjusted to include the new values.
I don't see a reason we should not allow this. We detect
a "failed stat reply" in other ways. Maybe this was a legacy
csync decision somewhow that is not valid anymore?
The reason is that updateFolderView is invoked by the
emitted signal folderSyncStateChange() anyway.
This will reduce the traffic over the SocketAPI nicely,
maybe this was the reason why it was slower than before.
There were two issues:
* With the refactoring of how Folder and SyncEngine relate, the
ignore_hidden_files flag on the CSync context was reset after
each sync run and not updated from the configuration again.
* The folder watcher failed to enumerate hidden folders and thus
didn't watch for changes inside them. (linux only)
SQLITE_DONE is the indicator for not more query results, which is a legal
thing and not an error condition.
Also, check _getFileRecordQuery for null pointer, as close() wipes it.
The problem with QSet is that the QDateTime was part of
the hash, but that does not make sens as it should be unique
per widget and not per <date, widget>
Instead make it a QHash so there is only one entry per widget.
The idea is that the next call to any database operation will try to
reopen the database through the checkConnect() method. So even if there
was a disconnect trom the db file, this will reestablish the connection.
Imagine tgus scenario on a read only share that you move file from
one location to a new directory in the read only share.
Creating the read only directory fails for permission error.
But we should also restore the files that have been moved.
IL issue 542
Remove all configure_files:
- Move all tests to cpp files
- Use the QTEST_MAIN macro instead of a generated main.cpp
- Include test*.moc in the cpp to let CMAKE_AUTOMOC call moc
- Pass info through add_definitions instead of generating oc_bin.h with them
This makes sure that build errors points to the original test source
file instead of the generated one in the build directory to be able to
jump and fix errors directly from the IDE's error pane.
Bring back the hardcoded status logic for excluded files.
Since the activity log doesn't even mention those files on purpose,
we can't rely on the SyncEngine to notify us about the status of those files.
Looking up a/aa while an error is present in a/aab/aaba would return
a warning status since a/aa is a substring of a/aab.
Fix the issue by checking if the following character is a slash.
This prevents having to define a Problem structure with dubious
operator overloads to accomplish the same.
Also use std::map::lower_bound to quickly iterate over the
list of problems.
* Remove duplicate remote path
* Use thin progress bar
* Move bandwidth and file info to tooltip
* Shorten overall progress message
This also fixes#4562 by making the layout not dependent on the
width of the displayed text.
This also remove all smartness from the SocketApi about the status
of a file and solely use info from the current and last sync.
This simplifies the logic a lot and prevents any discrepancy between
the status shown in the activity log and the one displayed on the
overlay icon of a file.
The main benefit of the additional simplicity is that we are able
to push all new status of a file reliably (including warnings for
parent folders) to properly update the icon on overlay implementations
that don't allow us invalidating the status cache, like on OS X.
Both errors and warning from the last sync are now kept in a set,
which is used to also affect parent folders of an error.
To make sure that errors don't become warning icons on a second
sync, SyncFileItem::_hasBlacklistEntry is also interpreted as an error.
This also renames StatusIgnore to StatusWarning to match this semantic.
SyncEngine::aboutToPropagate is used in favor of SyncEngine::syncItemDiscovered
since the latter is emitted before file permission warnings are set on the
SyncFileItem. SyncEngine::finished is not used since we have all the
needed information in SyncEngine::itemCompleted.
SyncFileStatus' purpose is to track overlay icon status.
Instead of putting comments and default: clauses in switch
on both sides about unused enums, use different enums.
This also remove STATUS_NEW which is the equivalent of
STATUS_SYNC in all shell extension implementations, and
remove STATUS_UPDATED and STATUS_STAT_ERROR which have
the same semantic as STATUS_UPTODATE and STATUS__ERROR.
This currently is no-op code since the socket API isn't notified
that the tainted folder list changed, and the result is the same
since a sync will be triggered within the next 5 seconds and the
modified folder will be shown as SYNC at that point anyway.
Removing the dependency to the file watcher allows moving the
status estimation logic to libsync.
This will help moving the SyncEngine construction in the constructor
and allow moving functionalities from Folder to SyncEngine or its
delegated objects.
If the user tries to install an older version of a branded client
with shell extensions, and also install the 2.1 ownCloud client
side-by-side, both shell extensions DLLs will be registered and might
lead to both DLLs versions being loaded by exlorer, causing a system
crash.
Since we don't support both branded and non-branded shell extensions
to work at the same time, at least make sure to unregister any legacy
CLSID that could cause explorer to load the previous version DLL.
The policy that was said is that if a notification has no action, the
client can and should display a close-button. This patch does it.
In additon to that, the client needs a blacklist of closed notifcations
otherwise they would re-appear next time the server notifications are
fetched again.
Also, changed the cleanup of not-longer-used widgets to be more robust.
If a notification is not longer in the list that comes from the
server, the notification is removed.
That is mainly for the notifications that are created by the
announcement application
Since the quota is a per-folder value, this will make the displayed data
more useful when a single sync folder is configured.
Of course each subfolder could have a different quota again.
The date we receive from the server is an ISO8601 datetime that
includes the offset from UTC. Qt does correctly parse this
information and creates the appropriate QDateTime object.
Calling setTimeSpec(UTC) will force the timezone offset to 0 and
thereby change the referenced point in time to an incorrect one.
Soldiering on with a broken or incomplete response could lead to
incorrect sync behavior.
Since discovery uses LsCol jobs which already handle errors
correctly, this should not have a significant impact.
the size on the server might be different from the size on the client
with certain backend so it should be ignored.
(cherry picked from commit 9222db6df9b19a21e1bea5a238d745d96a6385e3)
In SQLite bindings are not cleared by sqlite3_reset() calls, so
skipping a sqlite3_bind call to create a NULL value doesn't work,
instead the previous value will be written.
To fix this, I clear all bindings in SqlQuery::reset and make sure
to explicitly bind NULL when desired in SqlQuery::bind.
To make sure there's no confusion about SqlQuery::reset and
sqlite3_reset, I rename our method to reset_and_clear_bindings().
(cherry picked from commit 7bd4f95b8c)
In SQLite bindings are not cleared by sqlite3_reset() calls, so
skipping a sqlite3_bind call to create a NULL value doesn't work,
instead the previous value will be written.
To fix this, I clear all bindings in SqlQuery::reset and make sure
to explicitly bind NULL when desired in SqlQuery::bind.
To make sure there's no confusion about SqlQuery::reset and
sqlite3_reset, I rename our method to reset_and_clear_bindings().
The isValid check should be used everywhere the capabilities
are used as the loading of the capabilities is happening
in parallel of the startup, so it is not guaranteed to be
available always.
As interaction is required, the notifications are displayed in a
separate widget above the server activity list.
Note that design and also where we display the notifications can
still be discussed and changed.
If the ownCloud server does not have the activity app enabled,
it returns 999 as status code. If all the configured accounts
do that, this code hides the entire tab with the server
activities.
This is supposed to fix#4533
Helps with small file sync #331
When I benchmarked this, it went up to 6 parallelism and
was about 1/3 faster than the previous fixed 3 parallelism.
Doing more than 6 is dangerous because QNAM limits to 6 TCP
connections and also the server might become a bottleneck.
Should also help for #4081
Previously one could accidentally call Folder::setSyncPaused() and miss
some expected side effects. Before, the correct call was to FolderMan::
slotSetFolderPaused(). Now the setter on Folder has the expected effect.
This will be useful if we ever want to store account-level gui state.
I built this originally because I thought a paused account would be
this kind of state.
The creation doesn't need to be separated from the SyncEngine anymore.
This allows the SyncEngine to be created in fewer steps if we want to
use it in tests.
This moves most of the direct csync code from Folder into the SyncEngine.
The exclude file logic for the context has been wrapped using the
existing ExcludedFiles class as well.
Given that we control all call sites, the only way that this can fail is during
OOM. Also remove the code in csync itself to make sure that it's obvious that
any new error case wouldn't be handled by call sites.
As discussed with Klaas, this seems to be a better compromise.
10MB * 3 prarralel jobs = 30MB in memory, and to retry in case of
disconnection. Which is still reasonable. And might make the upload
almost twice as fast on fast network where the amount of chunk is the
bottleneck (because of more server processing)
Relates to issue #4354
If the PROPFIND return an invalid code (like 200) then we would
not recieve the error signal and we would never sync again.
Found while investigating https://github.com/owncloud/enterprise/issues/1068
The ".sys.admin#recall#" is the recall file and should not be ignored
even if hidden.
The remote discovery do not need to detect hidden files because it
is already detected by csync in all cases. So this avoid code duplication
This script creates the Nemo plugin out of the Nautilus plugin.
Both are source compatible, but need to include the right modules
depending on the name of the file manager.
The script is called by cmake.
ln has a special syntax to create the symlink inside the last path if it's
a directory (or a symlink to a directory).
Also pass --strict to codesign --verify to catch this kind of error.
Users have complained that they don't see the notification when it is
shown and are not aware that their files aren't syncing.
Remove the non-interactive credentials fetch logic and add make sure
that the shibboleth popup will flash in the taskbar instead.
This will still not allow the popup to show in front in all cases,
but this is a compromise that we have to chose.
This reverts commit dcb687929f.
Issue https://github.com/owncloud/enterprise/issues/990
This is the fix for issue #4370
Step to reproduce the bug:
1) have lots of files in directory "dir1"
2) do mkdir dir2 && mv dir1/* dir2
3) DURING the sync (which takes time because of the many moves) do mkdir dir3 && mv dir2/* dir3/
4) observe that files are PUT in the next sync
The problem is that SyncJournalFileRecord::SyncJournalFileRecord will fail to
get the inode after the forst move because the files are already moved on the
filesystem. Normaly it should use the inode from the discovery phase in that
case but that is not working because it comes from the remote node in case of
moves, so the code in SyncEngine::treewalkFile would not set the inode.
Test in https://github.com/owncloud/smashbox/pull/143
Added a new "chunkSize" entry in the General group of the owncloud.cfg
which can be set to the size, in bytes, of the chunks.
This allow user with hude bandwidth to select more optimal chunk size
Issue #4354
QFontMetrics::boundingRect doesn't return the right size for this
font size for some reason, while it works well if we remove the
smaller point size adjustment for the progress font.
To avoid having to debug the font system in Qt just increase the
existing +2px adjustment to +5px so that it renders fine.
Server older than 8.1 cannot cope with invalid char in the filename
so we must not send them from the client. We were already checking
for new files, but not for renames or new directories.
https://github.com/owncloud/enterprise/issues/1009
The height adjustment done to place the button in the middle of the
non-error area was only done for rendering. Make sure that we do the
same adjustment when mapping click events as well.
Also replace some wrong occurences of aliasMargin*2 for margin.
Previously we would fail to start if the directory was not existing.
This was working for relative directory, but it should also work for
absolute ones
https://github.com/owncloud/enterprise/issues/970
The bug seems to be in Windows when it upscales an smaller icon for
HiDPI displays. It works fine if we provide a 256x256 size in the
ico files.
Use the new square icons also used on OS X that removes the share badge
and instead has a share icon only for the OK state. This means that we
can also remove 3 icons and release 3 slots in the registry for
overlay icons (only the first few are actually loaded by explorer).
This also adds a script that uses ImageMagick to convert our SVG icons
to Windows ico files. Since ImageMagick seems to have issue doing
proper antialiasing with pixels on the edge of icons, this also
slightly scale the icons to leave 2px on each edge, out of its
logical 128px width.
Use QT_DEVICE_PIXEL_RATIO=auto on Qt<=5.5 to enable automatic
scale factor settings on Windows. Also move the existing
Qt::AA_EnableHighDpiScaling logic to use the equivalent
QT_AUTO_SCREEN_SCALE_FACTOR=1 environment variable just to
keep the 5.5 and >=5.6 code at the same place.
* Ensure every time a file becomes a directory or the other way around
the item is flagged as INSTRUCTION_TYPE_CHANGE.
* Delete the badly-typed entity if necessary in the propagation jobs.
QPainter::drawText uses the top of the font for the y position of its
rect argument, but uses the baseline when using a point argument.
Also use the margin variable that matches the font used instead of
the aliasMargin and make sure that the margin is only added between
the box and the text once.
The Qt HTTP thread calls authenticationRequired (indirectly) using a
BlockingQueuedConnection. So when we call invalidateToken from slot
connected to this signal and end up calling QNAM::clearAccessCache which
waits on the thread for 5 seconds
Backtraces:
Qt HTTP thread:
#0 0x00007ffff20c707f in pthread_cond_wait@@GLIBC_2.3.2 ()
#1 0x00007ffff43f0c0b in QWaitConditionPrivate::wait
#2 QWaitCondition::wait
#3 0x00007ffff43ea06b in QSemaphore::acquire
#4 0x00007ffff45dcf6f in QMetaObject::activate
[...]
#9 0x00007ffff45dd607 in QMetaObject::activate
#10 0x00007ffff4edbaf7 in QHttpNetworkReply::authenticationRequired
#11 0x00007ffff4e0b2b4 in QHttpNetworkConnectionPrivate::handleAuthenticateChallenge
#12 0x00007ffff4e10753 in QHttpNetworkConnectionChannel::handleStatus
#13 0x00007ffff4e11cc9 in QHttpNetworkConnectionChannel::allDone
#14 0x00007ffff4e14605 in QHttpProtocolHandler::_q_receiveReply
Main Thread:
#0 0x00007ffff20c7428 in pthread_cond_timedwait@@GLIBC_2.3.2 ()
#1 0x00007ffff43f0b56 in QWaitConditionPrivate::wait_relative (time=5000, this=0x136c580)
#2 QWaitConditionPrivate::wait (time=5000, this=0x136c580)
#3 QWaitCondition::wait (this=this@entry=0x136c788, mutex=mutex@entry=0x136c760, time=time@entry=5000)
#4 0x00007ffff43efa6e in QThread::wait (this=<optimized out>, time=time@entry=5000)
#5 0x00007ffff4e1edd3 in QNetworkAccessManagerPrivate::clearCache
#6 0x00007ffff7b6fb03 in OCC::HttpCredentials::invalidateToken()
#7 0x000000000057adb4 in OCC::AccountState::slotInvalidCredentials()
#8 0x000000000057ac76 in OCC::AccountState::slotConnectionValidatorResult(OCC::ConnectionValidator::Status, QStringList const&) ()
#9 0x00000000005ab45c in OCC::AccountState::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)
#10 0x00007ffff45dcd30 in QMetaObject::activate
#11 0x00007ffff7b78671 in OCC::ConnectionValidator::connectionResult(OCC::ConnectionValidator::Status, QStringList) ()
#12 0x00007ffff7ae2514 in OCC::ConnectionValidator::reportResult(OCC::ConnectionValidator::Status) ()
#13 0x00007ffff7ae39b7 in OCC::ConnectionValidator::slotAuthFailed(QNetworkReply*) ()
#14 0x00007ffff7b784a9 in OCC::ConnectionValidator::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) ()
#15 0x00007ffff45dcd30 in QMetaObject::activate
#16 0x00007ffff7b766dc in OCC::AbstractNetworkJob::networkError(QNetworkReply*)
#17 0x00007ffff7af9f6e in OCC::AbstractNetworkJob::slotFinished()
#18 0x00007ffff7b7654d in OCC::AbstractNetworkJob::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) ()
#20 0x00007ffff45dd607 in QMetaObject::activate
#21 0x00007ffff4edd143 in QNetworkReply::finished
#22 0x00007ffff4e3fec7 in QNetworkReplyHttpImplPrivate::finished
#23 0x00007ffff4e41818 in QNetworkReplyHttpImpl::close
#24 0x00007ffff7b7047b in OCC::HttpCredentials::slotAuthentication(QNetworkReply*, QAuthenticator*) ()
#25 0x00007ffff7b79092 in OCC::HttpCredentials::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) ()
#27 0x00007ffff45dd607 in QMetaObject::activate
#28 0x00007ffff4e1d6fb in QNetworkAccessManager::authenticationRequired
#29 0x00007ffff4e1ea07 in QNetworkAccessManagerPrivate::authenticationRequired
#30 0x00007ffff4e3c784 in QNetworkReplyHttpImplPrivate::httpAuthenticationRequired
Another case of Main Thread:
#5 0x00007ffff4e1edd3 in QNetworkAccessManagerPrivate::clearCache
#6 0x00007ffff7b6fb03 in OCC::HttpCredentials::invalidateToken()
#7 0x000000000057b1e4 in OCC::AccountState::slotInvalidCredentials() ()
#8 0x00000000005abb8a in OCC::AccountState::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) ()
#9 0x00007ffff45dcd30 in QMetaObject::activate
#10 0x00007ffff7b76ed5 in OCC::Account::invalidCredentials() ()
#11 0x00007ffff7ad55f5 in OCC::Account::handleInvalidCredentials()
#12 0x00007ffff7afa69a in OCC::AbstractNetworkJob::slotFinished()
#13 0x00007ffff7b7654d in OCC::AbstractNetworkJob::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) ()
#15 0x00007ffff45dd607 in QMetaObject::activate
#16 0x00007ffff4edd143 in QNetworkReply::finished
#17 0x00007ffff4e3fec7 in QNetworkReplyHttpImplPrivate::finished
#18 0x00007ffff4e41818 in QNetworkReplyHttpImpl::close
#19 0x00007ffff7b7047b in OCC::HttpCredentials::slotAuthentication(QNetworkReply*, QAuthenticator*) ()
#20 0x00007ffff7b79092 in OCC::HttpCredentials::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) ()
#22 0x00007ffff45dd607 in QMetaObject::activate
#23 0x00007ffff4e1d6fb in QNetworkAccessManager::authenticationRequired
Now that we have a separate list for files that could not be synced,
we can make sure that it only shows entries for files that are still
not in sync with the server. This allows the user to treat this list
as action items in order to get everything synced, including the
blacklist.
Simply remove the keep-errors logic that was used when the lists were
merged to achieve this result.
This has been fixed in the meanwhile, but we are still shipping
with Qt 5.4. Also, some Linux Distros will still have older Qt
versions.
Addresses issue #4301
The error status of children should only be used for the etag logic.
The SocketApi uses a path matching system to do this and the UI should
report errors only for individual involved files/directories.
This use the previous code by resetting the progress to hide
the progress back and then return errors in the FolderErrorMsg
data role of the folder model.
This also remove the unused FolderRemotePath role, remove FolderStatus
in favor of invalidating all roles in dataChanged and make sure
that the SyncRunning role is transfered properly from the SyncResult
to show the warning icon during sync.
Since the presence of any path in SyncEngine::_syncedItems
would translate in a SYNC status, platforms that don't refresh
all their status cache after an UPDATE_VIEW message like OS X
or Windows would keep displaying that status even after all
files are successfully synchronized.
- Read SyncFileItem::_status to determine the status to display mid-sync
- Match moved paths also to _renameTarget since this might be the
path to match
- Make sure that PropagateDirectory jobs also set SyncFileItem::_status
properly
If all the files bring us to past timestamp, it is possibly a backup
restoration in the server. In which case we want don't want to just
overwrite newer files with the older ones.
Issue #2325
After c3cf6aef7d the invokeMethod calls
should be adjusted to pass the new method arguments.
The result was currently a passing sync with this error message on
the console:
QMetaObject::invokeMethod: No such method OCC::Folder::slotSyncFinished()
The socket api uses native folder separator. We need to use QDir::cleanPath
for anything else so we only work with '/' everywhere else in the code
This fixes the sharing dialog on window.
Issue #4311
Since owncloud 2.1, csync_vio_local_stat was optimized because readdir
would already fetch most of the info. This works for the discovery,
but not later. And we used this function later for symliks and co.
So this fixes the .lnk on windows
Issue #4300
This conflicts with the KDE_INSTALL_PLUGINDIR and prevent the
dolphin plugin to be installed at the right location.
Since csync no longer have plugin, this can be removed
This secret key was used to wipe the database. In the past this was
usefull because of many bugs, but now this is not usefull anymore.
And cause trouble because it also erase the selective sync list.
Issue #4182
It's just a feature that was not there in 2.0
It means that removed folder stay on the undecided list if it is removed
from the server until the user press apply in the selective sync widget.
Not a very bad bug anyway.
... by replacing CONFIG by NO_MODULE option in find package
From the manual: "The CONFIG option may be used to skip Module mode
explicitly and switch to Config mode. It is synonymous to using
NO_MODULE."
As discusses with jan.
* Detailed permissions displayed in qtoolboxmenu
* Made share rows slightly smaller
Bug fix:
* Do not show delete permissions for file shares
Before the selective sync status text and apply/cancel buttons
were shown as soon as any folder was expanded. This changes it
to only show when the model is dirty (or a big folder confirmation
is needed).
This is nice because we auto-open the folder list sometimes
and having the apply/cancel buttons visible makes users think a
decision is needed.
* Compute the content checksum (in addition to the optional
transmission checksum) during upload (.eml files only)
* Add hook to compute and compare the checksum in csync_update
* Add content checksum to database, remove transmission checksum
The signal jsonReceived() now not only delivers the raw json string, but
also the status code that came as OCS reply.
Also, fixed a typo in the signals name (recieved => received).
Fix the warning:
QLayout: Attempting to add QLayout "" to OCC::ActivitySettings "", which already has a layout
It was caused because one layout was created with the wrong parent
A 403 is a reply code sent from the file firewall to indicate that
this directory is forbidden to use for the user.
The patch handles it by setting the state to IGNORED.
This addresses #3490
This patch lets a successful etag job check mark a timestamp.
If next time a connection check is requested, it is checked if
the last ETag happened within the last 30 seconds and if so the
connection check can be checked.
This way we avoid half of the PROPFINDs if all goes well.
- Changed sequence of menu items
- lowercased entries
- removed the "Account" from entries, its in the toolbox button already
- added a little space between toolbox button label and the rectangle.
Note that the activity has also entries of files that are not synced so
that not every activity entry has to have a local pendant.
Also, one activity entry can reference multiple files, so only the first
one is shown.
The problem was that Share could be deleted *before*
the OcsShareJob itself finished. Since Share was the
parent of the network job, its object would be deleted
too early.
In general, it's unnecessary to assign parents to the OcsJobs
because they delete themselves when finished.
If a folder was paused while being the next item in the scheduling
queue, the whole scheduling could get stuck.
This also fixes the progress information of paused folders possibly
getting stuck.
Now we have 1 simple dialog that includes 2 widgets.
* ShareLinkWidget (for link shares)
* ShareUserGroupWidget (for user/group shares)
The ShareUserGroupWidget is only included if the server version is >=
8.2.0
For <8.2.0 the old behavior is preserved
We changed the discovery code not to ignore files whose filename contains
charachter invalid on windows. (Because newer versions of the server
supports them)
Servers older than 8.1 will just say "Bad Request" as an error and it's a
regression against previous client version. So keep nice error even with
older server.
Relates to #3736
We did not flush or closed the file after having modified it from the UI.
So when the socket api was reloading it, it wouldn't be able to load
the newly added rules
These changes were committed to 2.0.2-rc1 branch https://github.com/owncloud/client/pull/3957/files6da2139a1b but that branch was never merged up into 2.0 (or 2.0.2-rc2) so the changes never went anywhere.
These changes could also be applied on 2.0.2-rc2 and 2.0.2 branch for completeness - then they would be in every branch in which they have appeared.
When the toolbar is full because there is no enough room, make the extension
of the toolbar work, by using QWidgetAction::createWidget instead of
QToolBar::insertWidget
There should not be prolem when the window is too narrow.
Relates #3832
Regressed since d610693af1. The problem
is that the _size vector contains the pathToRemove and that it was removed
before.
Reorganize a bit the code so there is only one loop that has still all the
information.
On unix we don't safe much (otherwise csync would have been
designed differently).
On windows however, the readdir already fetch all the info, so we
can as well use it.
We still have to query for the file id but we might optimize that later
- Disable the whole group box
- Add a tooltip explaining why it is disabled
- Make sure it is disabled in the settings in case of upgrade
- Do a runtime check in case the running Qt is greater
So we avoid lots of memory allocation.
We can work with char* directly since both the pattern and the file
name are in UTF-8 and there is no need to understand unicode for
such pattern.
(In fact, '?' would not match anyore non-ascii characters, but I
don't think that's a problem. I don't think anyone use '?' in its
exclude list. And the two allocations per call to csync_fnmatch are
really worth getting rid of)
To use the same logic as the other clients and unify ownBrander
implementations, the switch is now called multiAccount() rather
than singleAccount() with a reverse logic.
Desktop Client stays with the default of having multiaacount
enabled.
Note that existing brandings need to rename the switch.
https://github.com/owncloud/ownbrander/issues/443
If there is a any none files, we do not show the dialog saying that all
files have been removed. If a directory contiains ignored files, we still
want to show this message box even if the directory will not be deleted
There is now a generic OCSJob which must be inherited by other jobs. This is in
prepartion for the other OCS job that will come (for the Sharee API endpoint
for example).
More logic is moved from the sharedialog to the OcsShareJob. So in the GUI code
we now only say what we want (a new share, set the password etc). And the code
in libsync will make that happen. Error handling is for now still done in the
GUI part.
For now the ocsjob and ocssharejob live in gui but probabaly we should
create a libshare or libocs at some point.
Progress estimation is usually based on transfer speed. That makes no
sense when we're doing operations like deletes, that need very little
data transfer but nevertheless take a long time.
This hack attempts to detect this case better and switches to a
different estimate.
We should rewrite this to maintain and update estimates for the
transfer speed, per-file overhead and chunk-assembly overhead each
time an item finishes. Then we could provide more consistent progress
estimates without ad-hoc fixes like this one.
Also, there's an issue where resuming a partial download will lead
to exaggerated transfer speed estimates.
This menu in 2.0.* now has 4 options.
The small screenshot needs updating also. @carlaschroder it is probably best if you take a new screen shot from whatever client version you have been using for screen shots. That way they will all have a consistent look.
Introduce a global ExcludedFiles instance to avoid loading the global
exclude lists several times.
One could still add per-folder exclude lists by checking these after
the global ones.
Instead of checking whether the library path ends up somewhere in /usr,
set the architecture prefix, anyway. The library path mechanism is also
used in custom prefixes, without this change, the library gets installed
globally on Debian and Ubuntu, leading to non-standard behaviour and
cross-build problems, as multiple architecture builds of this library
can't be installed alongside each other.
This is the minimal change to correct this behaviour from upstream cmake.
Otherwise win32 api simply does not open reparse points at all,
such as junctions.
This will improve the user experience of #3813 as we now identify
the junctions as symlinks.... and ignore them properly.
Registry keys are no directories; you would not "migrate" to keys if you are just about to switch to them; resembling formulas as "Edit these / this Registry key/s" ease fast reading, for that also ":" instead of "::" at the end (formatting what follows)
fixes the unicode issue #3753
I don't know much CPP and Qt but after some google research I found this http://wiki.qt.io/Strings_and_encodings_in_Qt
it does mention trUtf8() that has done the trick for me on Linux with Gnome 3.16.
Haven't tested it on other systems
OwnCloudFinderRequestManager::_shareMenuTitle was not retained anymore
after the FinderSync refactoring which would cause it to contain any
kind of garbage value for some reason.
Fix the issue by also enabling ARC for RequestManager.m.
We can't enable ARC for the whole project since Finder.h is included
by many .m files and it's not trivial to port to ARC.
Registry keys are no directories; you would not "migrate" to keys if you are just about to switch to them; resembling formulas as "Edit these / this Registry key/s" ease fast reading, for that also ":" instead of "::" at the end (formatting what follows)
Should be stated clearly that there are no alternative 32- / 64-bit-ownCloud-Clients, but just a 32-bit-ownCloud-Client that is treated differently in 32- / 64-bit-Windows
fixes the unicode issue #3753
I don't know much CPP and Qt but after some google research I found this http://wiki.qt.io/Strings_and_encodings_in_Qt
it does mention trUtf8() that has done the trick for me on Linux with Gnome 3.16.
Haven't tested it on other systems
Now that fetchFromKeychain is solely called from AccountState::slotInvalidCredentials
and that this one already protects the fetch call using _waitingForNewCredentials,
we can remove that extra check.
This moves the responsibility of asking the user or not for
credentials from the Credentials classes back to the AccountState.
fetch() now only extract credentials from the keychain, reports
the result to the AccountState which then decides if askFromUser()
should be called or not. The result is once more reported to the
AccounState.
This also replaces the HttpCredentials::queryPassword virtual
which now lets HttpCredentialsGui and HttpCredentialsText do it
the way that they prefer.
The AccountState is now the only class responsible for triggering credentials
fetching from the keychain or from the user.
With the ShibbolethRefresher out of the question it's possible
to remove the invalidateAndFetch virtual and manually call invalidateToken.
This also allows us to move that code from Account to AccountState.
In the end this also allows us to move the fetch() call from the
ConnectionValidator and use the same code path as for invalid credentials.
Change the wording of the certificate error dialog to include the
account URL and be a bit more accurate.
(Do not mention "SSL" in user facing messages)
Previously, in case of an error while deleting a directory, we would not
remove the entries from the local db, despite most of the files would
be deleted.
Which means that if the files re-appear on the server with the same etag,
we would think the file were deleted from the client and propagate the change.
In 1.8.0 we had this bug that we would not see some directory in the server in
some cases. This would lead us to delete the file on the client. Normaly the
files are deleted from the local database and next sync would re-download the files.
But in the cases where there was an error deleting one of the file (for example
if it was locked) we would then propagate the delete to the server.
Fix this by always deleting from the database the files that we deleted.
Issue #3206
The original problem is that showing a popup not originated
from the main settings window while it's focused won't be
shown in front to the user.
This try not to highjack the user's attention of the user
by showing a notification when checking the connection for
valid credentials, and require the user to sign in through
the UI. There are still issues with showing that popup from
the tray icon, but the user will most likely be looking for
the popup in that case. The new sign in button directly in
the settings account works properly.
Use an iterator variable declared outside of the loop condition
expression.
MinGW doesn't support C99 very easily and it's easier to keep
our C code C89 compliant.
This function only checks the full path and the basename and is thus
around 7x faster. It is very useful in a csync_update context where
we know that the leading dirs have already been checked for exclusion.
A space at the start of the bullet point about "Locate and open the following file" seems to be causing that bullet point to not line up nicely on the rendered page.
Some "downloading" that should be "uploading".
Some bullet points with "code" items were rendering with bold, italics on the published page. These seemed to be bullet points that had 3 spaces at the start of their 2nd line of text. Other bullet points that rendered correctly had only 2 spaces. So I removed the extra space. I hope it renders nicely in the published form - it is a bit hard to know in the GitHub Preview, because that is trying to show change-sidebars and differences also.
- Invert icon color depending on the darkness of the theme
- Ensure icons and colors are changed when theme or colors
get changed during application run
Final patch for #3582
Because that's what's going on. A job can 'complete an item' or 'finish'.
Note that several jobs could complete the same item: a new directory
will complete on the PropagateRemoteMkdir and the PropagateDirectory
jobs.
Previously, PropagateDirectory jobs didn't emit the completed() signal.
Now that they do, we need to make sure to not add extra lines to the
protocol widget for them.
To accomplish that, the jobCompleted() signal now also contains the job
that completed the item.
instead of pretending it suicceed and not recursing in it.
This fixes a bug in which a folder with a too long name would be properly
created, then removed on the server in the next sync.
(cherry picked from commit 4bbf7669091cde7ec726b1708d8c54427b68f016)
Conflicts:
csync/src/csync.h
csync/src/csync_exclude.h
csync/src/csync_update.c
When user wants to limit the bandwidth, he does not care about speed
anymore. And parallelism on slow network might cause problems.
For issue #3382
Will also help for #3095
(cherry picked from commit b20f29f22797367c7aa92bd74389c99b10c852a4)
csync_vio_local_unix.c:109:7: warning: ignoring return value of function declared with
warn_unused_result attribute [-Wunused-result]
asprintf(&file_stat->original_name, "%s/%s", handle->path, dirent->d_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This should allow for the case when a user has set the limit to 0 and a new empty folder appears on the server. The folder will have size 0 (no files in it). Doing the >= test here will mean that the user will be prompted about the new folder, which I think is the behaviour they would expect.
The side-effect of this change is that if the user has a limit of, for example, 10,000,000 and a new folder comes along with exactly 10,000,000 of content then they will now be prompted about it. Before the change such a new folder would have been auto-synced without prompting the user. I do not think this is a big deal - I cannot believe that users will be counting exact bytes for this limit, they are just setting a rough number of MB at the UI.
Should fix https://github.com/owncloud/client/issues/3542
Now that the client is pushing all changes of state, we don't need
to track the requested URLs anymore and risk that the way that we
reseted that list could leave a few entries in Finder's cache outdated.
We can remove the same code from other platforms in a later release,
a bit earlier than a week before beta1.
This fixes a few issues with the new FinderSync integration on OSX which
can't easily clear its status cache when receiving an UPDATE_VIEW message
except by unregistering the folder, but which causes flickering.
This fix should also make the regeneration of the cache unnecessary on other
platforms through possibly expensive RETRIEVE_FILE_STATUS commands.
To allow forwarding all OK states of sync jobs to the socket API
we need to make sure that the vector doesn't contain unneeded items.
This initially was intended to force updating the metadata for parent
folders, but since then the should_update_metadata flag check was
added both here and in PropagateDirectory::finalize where the metadata
is actually updated for parent folders. We can safely remove the inclusion
of all remote directory items.
The signal is emitted in this case if the instruction is NONE
but in the only ultimately connected slot to this signal,
SocketApi::slotSyncItemDiscovered, we return early according
to the same condition.
The emission of the same signal at the end of treewalkFile remains
and take care of the normal cases.
that does not understand nullptr
Note that we can't just replace nullptr by 0 in createIndex otherwise
it would be ambiguious.
So leave it commented to show that your intention is to create it with
a null pointer (which is the default because of the default parameter)
- Remove the copy constructor. The default constructor is fine. Having
a user defined copy constructor inhibit the move constructor.
- Pass QVariantMap arguments via const references
- Do not return a pointer to Capabilities from the account. It is a
value type and should not be used by pointer.
This makes sure that users won't have to go into settings
to activate the extension. This might upset users by forcing
them to re-disable it on each oC upgrade, but if this becomes
an issue we should then make this configurable in the client's
settings itself.
The owncloud wizard already created the directory, but the recent addition
of FolderMan::checkPathValidityForNewFolder stopped allowing unexisting directories.
So change FolderMan::checkPathValidityForNewFolder to allow non existing directory
and whange the FolderWizard to create the directory if it does not exist.
Issue #3492
To avoid us having to construct the URL for public shares just rely on the
server to do it.
This makes it easier to maintain. For example if (in the not do distat future)
the index.php part is removed the server would just server this new url.
Together with the updater timer, check on linux, if the version on the
disk has still the same version string as the one that is running. If
not, restart if nothing is currently syncing.
The proxyAuthenticationRequired() signal now goes to the
ProxyAuthHandler class. That class will try to read the proxy settings
from the keychain or ask the user about them.
We won't ask the user for credentials for explicitly configured proxies.
It also does not change how the credentials for explicitly configured
proxies are stored. (see #261)
especially at places where the file system is hit. APPLICATION_NAME
may contain colons and other strange chars. APPLICATION_SHORTNAME
has to be a clean name.
This fixes client#3445
That allows better handling of remove requests that should not be done
because the directory is not empty on the remote side (as it contains
ignored files).
In particular:
* It's always possible to sign out, even if there's currently a
network problem or the service is unavailable.
* You can only sign in when you explicitly signed out before.
If we have a slow connection we do now want to show the share checkbox until we
have retrieved the shares (so we know the state). Else we might try to enable
sharing on an already shared file.
Issue #3239
The feature to dynamically resize the column only came with Qt5,
But give a better default size of the name column so we can read the
contents.
factorize the function to check the validity of a new folder out of
the folder wizard to the FolderMan.
There is even a test for it now.
That way we can also use it in the normal wizard
This made no sens. Folders are setup when the account is setup.
Also this had the bad side effect to shut the sync engine too early,
leaving the SyncEngine::_syncRunning to true, and leading to ASSERT later
Issue #3427
Before we only had c_utf8_to_locale, but now functionality is needed to
convert a path to UNC before converting it. That does c_utf8_path_to_locale
now, while c_utf8_string_to_locale only converts the plain string, ie.
to generate wide char strings for output.
This enables the calling function to free these accordingly. That is needed
because the makeLongWinPath for efficiency reasons does not always realloc
the original string.
No such slot OCC::GeneralSettings::slotForceRemoteDiscoveryOnFolders()
(sender name: 'OCC__IgnoreListEditor')
(receiver name: 'OCC__GeneralSettings')
The slot was in another settings page (because the button 'edit ignored files'
was moved.
Move the actual code to IgnoreListEditor where it logically belong.
Add a comment on the why this code is there.
Issue #3413
There was two problem:
- First, when singing in we were setting an account that was connected
to disconnected (AccountState::State)
- Second, while getting the result from the ConnectionValidator, we would
not set the state to connected if the previous call to ConnectionValidator
was ConnectionValidator::Connected, regardless of the old state of the account
Users with accounts on multiple servers could easily use the same
username on both servers. The password dialog did not tell users
what server the password is for. I added the account name to the
dialog.
For unencrypted connections there used to be a small arrow indicating
that more information was available, but clicking the button had no
effect. That indicator is now gone because we unset the SslButton's
menu for these cases.
* Show connection errors for all failing accounts in the tooltip.
* Don't hide the 'service unavailable' state. We don't want intrusive
pop ups, but we don't want to pretend we're syncing when we aren't.
* Show sync-running icon also for SyncPrepare state. In my tests I
very rarely saw the sync-running icon before.
application.cpp still had a global folder syncing on/off switch
when an account connected or disconnected. That couldn't work with
multiaccount.
Instead FolderMan listens to accountStateChanged messages and
schedules or de-schedules the folders for accounts that change state.
- Make it translatable
- Make use of the %n so that it supports plurals (but this will only
take effect if we have an english translation)
- Only put two units. eg: "5 years 7 months" instead of
"5 years 7 months 12 days 34 minutes 23 seconds"
Even when it is "2 hours 23 minutes" the amount of second does not
matter, especially since the estimation is likely to be boggus anyway
Issues #2672 and #3097
That way we do not need to include QIcon in theme.h
So the header can be included (indirrectly) from cmd.cpp
which is not compiled with the QtGui include paths
Too many people complained about that the entry can not be removed
if this should be synced. Users that want that one be synced please
add it to the user exclude list.
This reverts commit 5860e5a46b.
This allows developers to build and run the extension by default.
Official packages bundles will be re-signed after the build, we
The SocketApi prefix can be set at configure time through cmake and
should match the key that will be used to sign the whole .app bundle
(including the embedded FindexSync .appex bundle).
Since we use that class to lookup the NSBundle using bundleForClass
use a more specific name to avoid any clash with any othe liferay
extension. I couldn't figure out from the documentation if that is
only resolved using the class name, but found some warnings on
stackoverflow and better be safe than sorry for what it costs.
It was only used on OS X and couldn't be used by the FinderSync
extension since that one runs in a sandbox. So use the same system
to load images in the legacy extension by shipping them in the
extension bundle instead of the owncloud.app bundle.
This is also given that the legacy extension needs padded icons
while the FinderSync one needs unpadded icons.
Do not pass AccountState in constructor of Folder, set with a
new method called setAccountState after creation. Thus the
parameter does not need to be passed through all over.
Since GIT_SHA1 would need to be updated in config.h, all files
including it would be rebuilt by make.
Reduce the number of files to rebuild by moving this variable
to version.h instead.
The archive buildaction causes this. Use the default build while
forcing the Release configuration instead.
In both cases the result will end up in SYMROOT.
Theme will eventually be moved to the GUI
Theme::appNameGUI and QApplicaiton::applicationName are the same, it is currently
set in the constructor of ConfigFile
This uses the new official API to show overlay icons and add our
custom context menu entry instead of hooking directly into the
Finder process and intercept drawind routines.
A dummy desktopclient target is also in the project to allow debugging
directly in Xcode while the official client can be started from the
command line. Otherwise Xcode won't allow attaching to the debugee.
Dummy icon files have been added while we get proper icon produced.
We can't use the old icons since what we use for the legacy shell
integration is already padded according to where the badge should
appear on the full icon.
This prepares the switch to the official FinderSync API on Yosemite
which requires the extension to run in a sandbox. This complicates
the usage of a local socket to communicate with a non-sandboxed GUI
client. An NSConnection is easier to use in this case, which we can
use as long as the server name (i.e. Mach port registered name) is
prefixed with the code signing Team Identifier.
A placeholder server implementation is also added to the client's
SocketApi which basically reproduces the interface of a QLocalSocket.
Most of the references to individual sockets we're only using
QIODevice methods so the type was simply reduced. A typedef to
replace the QLocalServer was the only other part needed.
All things pushed to the "coverity_scan" branch will now get build by Travis and the resulting binary is pushed to Coverity and analyzed automatically.
Since Coverity has a fair usage policy which allows us up to 8 builds per week with a maximum of 2 builds per day we cannot run this automatedly on every push. Which also doesn't make that much sense.
Currently this can be used by reating a "coverity_scan" branch and force-pushing the new code to analyze. If all went well the Travis build should pass and Coverity should display the new information (give it some time to process the build though). In Coverity the SHA of the processed build will be used as version number as well as descriptive text.
(we can automate this though in the future as well if we want that too)
This will fail at the moment on master since Qt4 builds are failing as per https://ci.owncloud.org/job/client-build-matrix-linux/ - probably something that should get fixed. 1.8 branch worked fine though.
When the local sync target is just a drive letter (e.g. "X:\"), neither
the display of the sync status via file icon overlay, nor the creation of a
share link works. In the latter case no pop-up comes up and no server
request is done.
QDir::cleanPath() usually removes trailing slashes, but not if the path to
be cleaned is just "X:\". In that case the trailing slash is kept. This
commit accounts for that exception.
Use a QSharedPointer to keep the same ownership and
continue passing the SyncFileItems as a const& when
ownership isn't taken. This allows sharing the same
allocations between the jobs and the result vectors.
This saves about 20MB of memory (off 120MB) once all
jobs are created.
The AccountManager does not belong in the libsync because it is not
part of the synchronisation algorithm, but is just an helper class
for the UI to maintain the account and read/save the config
option(NO_SHIBBOLETH"Build without Shibboleth support. Allow to build the client without QtWebKit"OFF)
if(NO_SHIBBOLETH)
message("Compiling without shibboleth")
add_definitions(-DNO_SHIBBOLETH=1)
endif()
if(APPLE)
set(SOCKETAPI_TEAM_IDENTIFIER_PREFIX""CACHESTRING"SocketApi prefix (including a following dot) that must match the codesign key's TeamIdentifier/Organizational Unit")
@@ -6,9 +6,10 @@ We are also available on [IRC][irc].
### Bug Reporting Guidelines
* __Important__: Report the issue using our [template][template], it includes all the
informations we need to track down the issue.
information we need to track down the issue.
* __SECURITY__: Report any potential security bug to security@owncloud.com following our [security policy](https://owncloud.org/security/) instead of filing an issue in our bug tracker
* This repository is *only* for issues within the ownCloud desktop client.
Issues in other compontents should be reported in their own repositores:
Issues in other components should be reported in their own repositores:
RUN zypper --non-interactive --gpg-auto-import-keys refresh
RUN zypper --non-interactive --gpg-auto-import-keys ar http://download.opensuse.org/repositories/windows:/mingw/openSUSE_42.1/windows:mingw.repo
RUN zypper --non-interactive --gpg-auto-import-keys ar http://download.opensuse.org/repositories/isv:ownCloud:toolchains:mingw:win32:2.3/openSUSE_Leap_42.1/isv:ownCloud:toolchains:mingw:win32:2.3.repo
RUN zypper --non-interactive --gpg-auto-import-keys install cmake make mingw32-cross-binutils mingw32-cross-cpp mingw32-cross-gcc \
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Hautatu nola nahi duzun ${APPLICATION_NAME} instalatzea."
StrCpy$PageReinstall_OLD_Field_1"${APPLICATION_NAME}ren bertsio berriago bat instalatuta dago! Ez da aholkatzen bertsio zaharrago bat instalatzea. Benetan bertsio zaharrago hau instalatu nahi baduzu, hobe da lehenengo bertsio berria desinstalatzea. Hautatu nahi duzun aukera eta sakatu Hurrengoa jarraitzeko."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} dagoeneko instalatuta dago.\nHautatu zer operazio egin nahi duzu eta klikatu Hurrengoa jarraitzeko."
StrCpy$UAC_ERROR_ELEVATE"Ezin izan da goratu, errorea:"
StrCpy$UAC_INSTALLER_REQUIRE_ADMIN"Instalatzaileak administratzaile baimenak behar ditu, saiatu berriro"
StrCpy$INIT_INSTALLER_RUNNING"Instalatzailea dagoeneko martxan da."
StrCpy$UAC_UNINSTALLER_REQUIRE_ADMIN"Desinstalatzaile honek administratzaile baimenak behar ditu, saiatu berriro"
StrCpy$UAC_ERROR_LOGON_SERVICE"Saioa hasteko zerbitzua ez dago martxan, bertan behera uzten!"
StrCpy$INIT_UNINSTALLER_RUNNING"Desinstalatzailea dagoeneko martxan da."
StrCpy$SectionGroup_Shortcuts"Lasterbideak"
StrCpy$UAC_ERROR_ELEVATE"Unable to elevate, error:"
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Trieu la manera com voleu instal·lar ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Una versió més recent de ${APPLICATION_NAME} ja està instal.lada!! No es recomana instal.lar una versió més antiga. Si realment voleu instal.lar una versió més antiga, és millor primer desinstal.lar la versió actual. Seleccioni l'operació que desitjeu realitzar i feu clic a Següent per a continuar."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} ja està instal.lat.↩\nSeleccioneu l'operació que desitjeu realitzar i feu clic a Següent per continuar."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} ja està instal·lat.$\n$\nSeleccioneu la operació que voleu fer i feu clic a Següent per continuar."
StrCpy$OPTION_SECTION_SC_DESKTOP_Desc"Drecera a l'escrptori per ${APPLICATION_NAME}."
StrCpy$OPTION_SECTION_SC_QUICK_LAUNCH_Desc"Drecera d'inici ràpid per ${APPLICATION_NAME}."
StrCpy$UNINSTALLER_APPDATA_SUBTITLE"Esborra la carpeta de dades de ${APPLICATION_NAME} del vostre equip."
StrCpy$UNINSTALLER_APPDATA_LABEL_1"Voleu esborrar la carpeta de dades de ${APPLICATION_NAME}?"
StrCpy$UNINSTALLER_APPDATA_LABEL_2"Deixeu-ho sense marcar per mantenir la carpeta de dades per un ús posterior o marqueu-ho per esborrar la carpeta de dades."
StrCpy$UNINSTALLER_APPDATA_CHECKBOX"Sí, esborra la carpeta de dades."
StrCpy$UNINSTALLER_FILE_Detail"Escrivint el desinstal·lador"
StrCpy$UNINSTALLER_REGISTRY_Detail"Escrivint les claus del registre de l'instal·lador"
StrCpy$UNINSTALLER_FINISHED_Detail"Acabat"
@@ -42,5 +38,6 @@ StrCpy $UAC_ERROR_ELEVATE "No es pot elevar, error:"
StrCpy$UAC_INSTALLER_REQUIRE_ADMIN"Aquest instal·lador requereix accés d'administrador, intenteu-ho de nou"
StrCpy$INIT_INSTALLER_RUNNING"L'instal·lador ja s'està executant."
StrCpy$UAC_UNINSTALLER_REQUIRE_ADMIN"Aquest desinstal·lador requereix accés d'administrador, intenteu-ho de nou."
StrCpy$UAC_ERROR_LOGON_SERVICE"El servei de inici de sessió no s'està executant, s'està abortant!"
StrCpy$INIT_UNINSTALLER_RUNNING"El desinstal·lador ja s'està executant."
StrCpy$MUI_FINISHPAGE_SHOWREADME_TEXT_STRING"Zobrazit poznámky k vydání"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Nalezen proces(y) ${APPLICATION_EXECUTABLE}, které je nutné ukončit .$\nPřejete si, aby je instalátor za vás ukončil?"
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"Proces k ukončení nebyl nalezen! "
StrCpy$PageReinstall_NEW_Field_1"Starší verze ${APPLICATION_NAME} je nainstalována na tomto systému. Doporučuje se předem tuto verzi odinstalovat. Zvolte operaci, kterou chcete uskutečnit, a klikněte na tlačítko Další pro pokračování."
StrCpy$PageReinstall_NEW_Field_2"Odinstalovat před instalací"
StrCpy$MUI_FINISHPAGE_SHOWREADME_TEXT_STRING"Zobrazit poznmky k vydn¡"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Nalezen proces(y) ${APPLICATION_EXECUTABLE}, kter‚ je nutn‚ ukonŸit .$\nPýejete si, aby je instaltor za vs ukonŸil?"
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"Proces k ukonŸen¡ nebyl nalezen! "
StrCpy$PageReinstall_NEW_Field_1"Starç¡ verze ${APPLICATION_NAME} je nainstalovna na tomto syst‚mu. DoporuŸuje se pýedem tuto verzi odinstalovat. Zvolte operaci, kterou chcete uskuteŸnit, a kliknØte na tlaŸ¡tko Dalç¡ pro pokraŸovn¡."
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Zvolte, jak chcete ${APPLICATION_NAME} nainstalovat."
StrCpy$PageReinstall_OLD_Field_1"Novější verze aplikace ${APPLICATION_NAME} je již nainstalována. Instalace starší verze se nedoporučuje. Pokud opravdu chcete tuto starší verzi nainstalovat, je lepší nejprve odinstalovat současnou verzi. Zvolte požadovanou operaci a klikněte na Další pro pokračování."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} je již nainstalována.\nZvolte požadovanou operaci a klikněte na Další pro pokračování."
StrCpy$PageReinstall_SAME_Field_2"Přidat či znovu instalovat komponenty"
StrCpy$PageReinstall_OLD_Field_1"NovØjç¡ verze aplikace ${APPLICATION_NAME} je ji§ nainstalovna. Instalace starç¡ verze se nedoporuŸuje. Pokud opravdu chcete tuto starç¡ verzi nainstalovat, je lepç¡ nejprve odinstalovat souŸasnou verzi. Zvolte po§adovanou operaci a kliknØte na Dalç¡ pro pokraŸovn¡."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} je ji§ nainstalovna.$\n$\nZvolte po§adovanou operaci a kliknØte na Dalç¡ pro pokraŸovn¡."
StrCpy$PageReinstall_SAME_Field_2"Pýidat Ÿi znovu instalovat komponenty"
StrCpy$OPTION_SECTION_SC_DESKTOP_Desc"Zástupce na ploše pro ${APPLICATION_NAME}."
StrCpy$OPTION_SECTION_SC_QUICK_LAUNCH_Desc"Zástupce rychlého spuštění pro ${APPLICATION_NAME}."
StrCpy$UNINSTALLER_APPDATA_SUBTITLE"Odstraňte složku s daty aplikace ${APPLICATION_NAME} z tohoto počítače."
StrCpy$UNINSTALLER_APPDATA_LABEL_1"Chcete smazat složku s daty ${APPLICATION_NAME}?"
StrCpy$UNINSTALLER_APPDATA_LABEL_2"Ponechejte nezaškrtnuté, pokud chcete složku s daty ponechat pro pozdější využití, nebo zaškrtněte, pokud chcete složku smazat."
StrCpy$UNINSTALLER_APPDATA_CHECKBOX"Ano, smazat tuto složku s daty."
StrCpy$MUI_FINISHPAGE_SHOWREADME_TEXT_STRING"Toon opmerkingen bij deze versie"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Gevonden ${APPLICATION_EXECUTABLE} proces(sen) moet worden gestopt.$\nWilt u dat het installatieprogramma dat voor u doet?"
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"Het te stoppen proces is niet gevonden!"
StrCpy$PageReinstall_NEW_Field_1"Er is een oudere versie van ${APPLICATION_NAME} geïnstalleerd op uw systeem. geadviseerd wordt om de huidige versie te de-installeren voordat de nieuwe versie wordt geïnstalleerd. Selecteer de uit te voeren actie en klik op Verder om door te gaan."
StrCpy$PageReinstall_NEW_Field_2"De-installeren voor installeren"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Kies hoe u ${APPLICATION_NAME} wilt installeren."
StrCpy$PageReinstall_OLD_Field_1"Er is al een recentere versie van ${APPLICATION_NAME} geïnstalleerd! Installeren van een oudere versie wordt niet aangeraden. Als u echt de oudere versie wilt installeren, adviseren we de huidige versie eerst te verwijderen. Kies de actie die u wilt uitvoeren en druk op Verder om door te gaan."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} is al geïnstalleerd.\nKies de actie die u wilt uitvoeren en druk op Verder om door te gaan."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} is al geïnstalleerd.$\n$\nKies de actie die u uit wil voeren en druk op Verder om door te gaan."
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Choose how you want to install ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"A newer version of ${APPLICATION_NAME} is already installed! It is not recommended that you install an older version. If you really want to install this older version, it is better to uninstall the current version first. Select the operation you want to perform and click Next to continue."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} is already installed.\r\nSelect the operation you want to perform and click Next to continue."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Vali, kuidas sa soovid paigaldada ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Uuem versioon ${APPLICATION_NAME} on juba paigaldatud! Vanema versiooni paigaldus ei ole soovitatav. Kui tõesti tahad paigaldada vanemat versiooni, siis on parem esmalt eemaldada olemasolev. Vali tehtav toiming ning kliki Jätka."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} on juba paigaldatud.\nVali tehtav toiming ning kliki Jätka."
StrCpy$UAC_ERROR_ELEVATE"Ei suuda ülendada õigusi, viga: "
StrCpy$UAC_INSTALLER_REQUIRE_ADMIN"See paigaldaja vajab admini ligipääsu, proovi uuesti"
StrCpy$INIT_INSTALLER_RUNNING"Paigaldaja on juba käimas."
StrCpy$UAC_UNINSTALLER_REQUIRE_ADMIN"See desinstallija vajab admini ligipääsu, proovi uuesti"
StrCpy$INIT_UNINSTALLER_RUNNING"See desinstallija on juba käimas"
StrCpy$SectionGroup_Shortcuts"Viidad"
StrCpy$OPTION_SECTION_SC_SHELL_EXT_SECTION"Integration for Windows Explorer"
StrCpy$OPTION_SECTION_SC_SHELL_EXT_DetailPrint"Installing Integration for Windows Explorer"
StrCpy$UAC_ERROR_LOGON_SERVICE"Sisselogimisteenus ei tööta, katkestamine!"
StrCpy$INIT_UNINSTALLER_RUNNING"See desinstallija on juba käimas."
StrCpy$SectionGroup_Shortcuts"Otseteed"
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
StrCpy$MUI_FINISHPAGE_SHOWREADME_TEXT_STRING"نمایش پادداشت های انتشار نسخه"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"${APPLICATION_EXECUTABLE} پردازش (ها) که باید متوقف شوند را پیدا کرد. $\nآیا میخواهیم برنامه نصاب این پردازشها را برای شما متوقف کند ؟"
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"پردازش برای از بین بردن یافت نشد!"
StrCpy$PageReinstall_NEW_Field_1"نسخهی قدیمی از برنامه ${APPLICATION_NAME} بر روی سیستم شما نصب شده است، پیشنهاد میشود نسخهی فعلی را قبل از نصب حذف کنید. عملیات مورد نظر را انتخاب کنید و برای ادامه روی دکمه Next کلیک کنید."
StrCpy$PageReinstall_NEW_Field_2"عمل حذف را قبل از نصب انجام دهید"
StrCpy$PageReinstall_NEW_Field_3"حذف نکن"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_TITLE"از قبل نصب شده است"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"نحوهی نصب ${APPLICATION_NAME} را انتخاب کنید."
StrCpy$PageReinstall_OLD_Field_1"نسخه جدیدتری از برنامه ${APPLICATION_NAME} بر روی سیستم شما نصب شده است، نصب نسخهی قدیمیتر پیشنهاد نمیشود. درصورتیکه میخواهید نسخهی قدیمی را نصب کنید، حذف نسخهی کنونی قبل از اجرای نصب جدید پیشنهاد میشود. عملیات مورد نظر را انتخاب و بر روی دکمهی Next کلیک کنید."
StrCpy$PageReinstall_SAME_Field_1"نسخه ${VERSION} از ${APPLICATION_NAME} هماکنون نصب شده است.$↩$\nعملیات مورد نظر را انتخاب و بر روی دکمه Next کلیک کنید."
StrCpy$OPTION_SECTION_SC_DESKTOP_Desc"میانبر دسکتاپ برای ${APPLICATION_NAME} ."
StrCpy$OPTION_SECTION_SC_QUICK_LAUNCH_Desc"میانبر اجرای سریع برای ${APPLICATION_NAME}"
StrCpy$UNINSTALLER_FILE_Detail"نوشتن حذف کننده"
StrCpy$UNINSTALLER_REGISTRY_Detail"در حال نوشتن کلید های رجیستری نصاب"
StrCpy$UNINSTALLER_FINISHED_Detail"اتمام"
StrCpy$UNINSTALL_MESSAGEBOX"به نظر نمی رسد نرم افزار ${APPLICATION_NAME} در '$INSTDIR'.$\n$\nنصب شده باشد.$\nآیا می خواهید ادامه دهید ( توصیه نشده است ) ؟"
StrCpy$UNINSTALL_ABORT"عمل حذف توسط کاربر متوقف شد"
StrCpy$INIT_UNINSTALLER_RUNNING"حذف کننده از قبل در حال اجراست."
StrCpy$SectionGroup_Shortcuts"میانبرها"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Found ${APPLICATION_EXECUTABLE} process(s) which need to be stopped.$\nDo you want the installer to stop these for you?"
StrCpy$PageReinstall_NEW_Field_1"An older version of ${APPLICATION_NAME} is installed on your system. It is recommended that you uninstall the current version before installing. Select the operation you want to perform and click Next to continue."
StrCpy$PageReinstall_NEW_Field_2"Uninstall before installing"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Choose how you want to install ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"A newer version of ${APPLICATION_NAME} is already installed! It is not recommended that you install an older version. If you really want to install this older version, it is better to uninstall the current version first. Select the operation you want to perform and click Next to continue."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} is already installed.\r\nSelect the operation you want to perform and click Next to continue."
StrCpy$UNINSTALL_MESSAGEBOX"It does not appear that ${APPLICATION_NAME} is installed in the directory '$INSTDIR'.$\r$\nContinue anyway (not recommended)?"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Havaittiin sovelluksen ${APPLICATION_EXECUTABLE} prosessi (tai prosesseja) jotka pitäisi pysäyttää.\nHaluatko että asennusohjelma pysäyttää nämä puolestasi?"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Havaittiin sovelluksen ${APPLICATION_EXECUTABLE} prosessi (tai prosesseja) jotka pitäisi pysäyttää.$\nHaluatko että asennusohjelma pysäyttää nämä puolestasi?"
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"Tapettavaa prosessia ei löytynyt!"
StrCpy$PageReinstall_NEW_Field_1"Vanhempi versio sovelluksesta ${APPLICATION_NAME} on jo asennettu. On suositeltavaa että poistat vanhan asennuksen ensin. Valitse mikä toiminto suoritetaan ja napsauta Seuraava jatkaaksesi."
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Valitse miten ${APPLICATION_NAME} asennetaan."
StrCpy$PageReinstall_OLD_Field_1"Uudempi versio sovelluksesta ${APPLICATION_NAME} on jo asennettu! Vanhan version asennus ei ole suositeltavaa. Jos todella haluat asentaa vanhemman version, kannattaa poistaa nykyisen version asennus ensin. Valitse minkä toimenpiteen haluat suorittaa ja paina Seuraava jatkaaksesi."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} on jo asennettu.\nValitse suoritettava toimenpide ja napsauta Seuraava jatkaaksesi."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} on jo asennettu.$\n$\nValitse haluamasi toiminto ja napsauta Seuraava jatkaaksesi."
StrCpy$UNINSTALLER_APPDATA_LABEL_1"Haluatko varmasti poistaa ${APPLICATION_NAME}-datakansion?"
StrCpy$UNINSTALLER_APPDATA_LABEL_2"Jätä valinta ruksimatta säilyttääksesti datakansion myöhempää käyttöä varten tai täytä ruksi jos haluat poistaa datakansion ja siinä olevat tiedostot."
StrCpy$UNINSTALLER_APPDATA_CHECKBOX"Kyllä, poista tämä datakansio."
StrCpy$UNINSTALL_MESSAGEBOX"Vaikuttaa siltä että sovellus ${APPLICATION_NAME} on asennettu kansioon '$INSTDIR'.\n\nHaluatko jatkaa tästä huolimatta (ei suositeltavaa)?"
StrCpy$UNINSTALL_MESSAGEBOX"Vaikuttaa siltä että sovellus ${APPLICATION_NAME} on asennettu kansioon '$INSTDIR'.$\n$\nHaluatko jatkaa tästä huolimatta (ei suositeltavaa)?"
StrCpy$UNINSTALL_ABORT"Poistaminen keskeytettiin käyttäjän toimesta"
StrCpy$PageReinstall_OLD_Field_1"Une version plus récente de ${APPLICATION_NAME} est déjà installée ! Il n'est pas recommandé d'installer une version plus ancienne. Si vous voulez vraiment installer cette version plus ancienne, il est préférable de d'abord désinstaller la version courante. Sélectionnez l'opération que vous voulez exécuter et cliquez sur Suivant pour continuer."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} est déjà installé.\nSélectionnez l'opération que vous voulez exécuter et cliquez sur Suivant pour continuer."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} est déjà installé.$\n$\nSélectionnez l'opération que vous souhaitez effectuer et cliquez sur Suivant pour continuer."
StrCpy$PageReinstall_SAME_Field_2"Ajouter/Réinstaller des composants"
@@ -27,10 +27,6 @@ StrCpy $OPTION_SECTION_SC_APPLICATION_Desc "Essentiels de ${APPLICATION_NAME}."
StrCpy$OPTION_SECTION_SC_START_MENU_Desc"Raccourci de ${APPLICATION_NAME}"
StrCpy$OPTION_SECTION_SC_DESKTOP_Desc"Raccourci Bureau de ${APPLICATION_NAME}."
StrCpy$OPTION_SECTION_SC_QUICK_LAUNCH_Desc"Raccourci de lancement rapide de ${APPLICATION_NAME}."
StrCpy$UNINSTALLER_APPDATA_SUBTITLE"Supprimer de cet ordinateur le dossier de données de ${APPLICATION_NAME}."
StrCpy$UNINSTALLER_APPDATA_LABEL_1"Voulez-vous supprimer le dossier de données de ${APPLICATION_NAME} ?"
StrCpy$UNINSTALLER_APPDATA_LABEL_2"Laisser non-coché pour garder le dossier de données pour un usage ultérieur. Cocher pour supprimer le dossier de données."
StrCpy$UNINSTALLER_APPDATA_CHECKBOX"Oui, supprimer ce dossier de données."
StrCpy$UNINSTALLER_FILE_Detail"Écriture du désinstallateur"
StrCpy$UNINSTALLER_REGISTRY_Detail"Écriture des clefs de registre du désinstallateur"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Escolla como quere instalar ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Ten instalada unha versión actualizada do ${APPLICATION_NAME}! recomendámoslle que non instale unha versión anterior. Se realmente quere instalar esta versión máis antiga, é preferíbel que desinstale a versión actual antes de instalar. Seleccione a operación que quere realizar e prema en Seguinte para continuar."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} xa está instalado.\nSeleccione a operación que que quere realizar e prema en Seguinte para continuar."
StrCpy$OPTION_SECTION_SC_START_MENU_Desc"Acceso directo ao ${APPLICATION_NAME}."
StrCpy$OPTION_SECTION_SC_DESKTOP_Desc"Acceso directo no escritorio para "
StrCpy$OPTION_SECTION_SC_QUICK_LAUNCH_Desc"Acceso de inicio rápido para ${APPLICATION_NAME}."
StrCpy$UNINSTALLER_APPDATA_SUBTITLE"Retirar o cartafol de datos do ${APPLICATION_NAME} do seu computador."
StrCpy$UNINSTALLER_APPDATA_LABEL_1"Confirma que quere eliminar o cartafol de datos do ${APPLICATION_NAME}?"
StrCpy$UNINSTALLER_APPDATA_LABEL_2"Deixeo sen marcar para manter o cartafol de datos para o seu uso posterior ou marqueo para eliminar o cartafol de datos."
StrCpy$UNINSTALLER_APPDATA_CHECKBOX"Si, eliminar este cartafol de datos."
StrCpy$UNINSTALLER_FILE_Detail"Escribindo o desinstalador"
StrCpy$UNINSTALLER_REGISTRY_Detail"Escribindo o instalador nas chaves do rexistro"
StrCpy$UNINSTALLER_FINISHED_Detail"Rematado"
@@ -42,5 +37,7 @@ StrCpy $UAC_ERROR_ELEVATE "Non foi pos
StrCpy$UAC_INSTALLER_REQUIRE_ADMIN"Este instalador require acceso de administrador, ténteo de novo"
StrCpy$INIT_INSTALLER_RUNNING"O instalador xa está en execución."
StrCpy$UAC_UNINSTALLER_REQUIRE_ADMIN"Este desinstalador require acceso de administrador, ténteo de novo"
StrCpy$UAC_ERROR_LOGON_SERVICE"O servizo de acceso non está en execución, cancelando!"
StrCpy$INIT_UNINSTALLER_RUNNING"O desinstalador xa está en execución."
StrCpy$SectionGroup_Shortcuts"Atallos"
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Wählen Sie die Methode, mit der sie ${APPLICATION_NAME} installieren wollen."
StrCpy$PageReinstall_OLD_Field_1"Eine neuere Version von ${APPLICATION_NAME} ist bereits installiert! Es wird nicht empfohlen, eine ältere Version zu installieren. Wollen Sie dies trotzdem tun, so sollten Sie die aktuelle Version zunächst entfernen. Wählen Sie eine Vorgehensweise und wählen dann $\"Weiter$\"."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} ist bereits installiert.\nWählen Sie eine Vorgehensweise und klicken Sie auf $\"Weiter$\"."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} ist bereits installiert. $\nWählen Sie eine Vorgehensweise und klicken Sie auf $\"Weiter$\"."
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Επιλέξτε πώς θέλετε να εγκαταστήσετε την ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Μια νεώτερη έκδοση της ${APPLICATION_NAME} είναι ήδη εγκατεστημένη! Δεν συνίσταται να εγκαταστείσετε μια παλαιότερη έκδοση. Εάν θέλετε πραγματικά να εγκαταστήσετε αυτήν την παλαιότερη έκδοση, είναι καλύτερο να απεγκαταστήσετε την τρέχουσα έκδοση πρώτα. Επιλέξτε τη διαδικασία που επιθυμείτε να εκτελέσετε και επιλέξτε Επόμενο γιανα συνεχίσετε."
StrCpy$PageReinstall_SAME_Field_1"Η ${APPLICATION_NAME} ${VERSION} είναι ήδη εγκατεστημένη.\n\nΕπιλέξτε τη διαδικασία που επιθυμείτε να εκτελέσετε και επιλέξτε Επόμενο γιανα συνεχίσετε."
StrCpy$PageReinstall_SAME_Field_1"Η ${APPLICATION_NAME} ${VERSION} είναι ήδη εγκατεστημένη.$\n$\nΕπιλέξτε τη λειτουργία που επιθυμείτε να εκτελέσετε και επιλέξτε Επόμενο γιανα συνεχίσετε."
StrCpy$OPTION_SECTION_SC_DESKTOP_Desc"Συντόμευση επιφάνειας εργασίας της ${APPLICATION_NAME}."
StrCpy$OPTION_SECTION_SC_QUICK_LAUNCH_Desc"Συντόμευση Ταχείας Εκκίνησης της ${APPLICATION_NAME}."
StrCpy$UNINSTALLER_APPDATA_SUBTITLE"Αφαίρεση του φακέλου δεδομένων της ${APPLICATION_NAME} από τον υπολογιστή σας."
StrCpy$UNINSTALLER_APPDATA_LABEL_1"Θέλετε να αφαιρέσετε τον φάκελο δεδομένων της ${APPLICATION_NAME};"
StrCpy$UNINSTALLER_APPDATA_LABEL_2"Αφήστε κενό γιανα διατηρήσετε τον φάκελο δεδομένων για μελλοντική χρήση ή επιλέξτε γιανα διγράψετε το φάκελο δεδομένων."
StrCpy$UNINSTALLER_APPDATA_CHECKBOX"Ναι, διαγραφή αυτού του φακέλου δεδομένων."
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"A következő folyamatot(okat) meg kell állítani ${APPLICATION_EXECUTABLE}.$\nSzeretné ha a telepítő program megállítani ezeket a folyamatokat?"
StrCpy$ConfirmEndProcess_KILLING_PROCESSES_TEXT"${APPLICATION_EXECUTABLE} folyamat kilövése."
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"A kilövésre szánt folyamat nem található!"
StrCpy$PageReinstall_NEW_Field_1"Az ${APPLICATION_NAME} alkalmazás egy régebbi verziója telepítve van a rendszeren. Ajánlott a régi alkalmazás eltávolítása mielőtt a legfrissebb verziót telepítené. Válassza ki milyen műveletet szeretne végrehajtani, és nyomja meg a $\"Következő$\" gombot a folytatáshoz."
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Válaszd ki, hogy szeretnéd telepíteni a következő alkalmazást ${APPLICATION_NAME}."
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Válassza ki, hogy szeretné telepíteni a következő alkalmazást: ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Az ${APPLICATION_NAME} alkalmazás egy újabb verziója már megtalálható a rendszeren. Nem ajánlott egy régebbi verzió telepítése. Ha valóban szeretné a régebbi verziót telepíteni, akkor ajánlott a jelenleg telepített verzió eltávolítása. Válassza ki milyen műveletet szeretne végrehajtani, és nyomja meg a $\"Következő$\" gombot a folytatáshoz."
StrCpy$PageReinstall_SAME_Field_1"Az ${APPLICATION_NAME} alkalmazás ${VERSION} verziója már telepítve van.$↩$\nKérjük válaszd ki milyen műveletet szeretnél végrehajtani, és nyomd meg a „Következő” gombot."
StrCpy$UNINSTALL_MESSAGEBOX"Nem sikerült az ${APPLICATION_NAME} alkalmazás telepítése a '$INSTDIR' könyvtárba.$\n$\nSzeretné mindenképpen folytatni (nem ajánlott)?"
StrCpy$UNINSTALL_ABORT"Az eltávolítást a felhasználó megszakította"
StrCpy$UAC_UNINSTALLER_REQUIRE_ADMIN"Az eltávolító futtatásához adminisztrátori hozzáférés szükséges, próbálja újra."
StrCpy$UAC_ERROR_LOGON_SERVICE"A bejelentkező szolgáltatás nem fut, megszakítás!"
StrCpy$INIT_UNINSTALLER_RUNNING"Az eltávolító már fut."
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Found ${APPLICATION_EXECUTABLE} process(s) which need to be stopped.$\nDo you want the installer to stop these for you?"
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"Process to kill not found!"
StrCpy$PageReinstall_NEW_Field_1"An older version of ${APPLICATION_NAME} is installed on your system. It is recommended that you uninstall the current version before installing. Select the operation you want to perform and click Next to continue."
StrCpy$PageReinstall_OLD_Field_1"A newer version of ${APPLICATION_NAME} is already installed! It is not recommended that you install an older version. If you really want to install this older version, it is better to uninstall the current version first. Select the operation you want to perform and click Next to continue."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} is already installed.\r\nSelect the operation you want to perform and click Next to continue."
StrCpy$PageReinstall_SAME_MUI_HEADER_TEXT_SUBTITLE"Choose the maintenance option to perform."
StrCpy$UNINSTALL_MESSAGEBOX"It does not appear that ${APPLICATION_NAME} is installed in the directory '$INSTDIR'.$\r$\nContinue anyway (not recommended)?"
StrCpy$UAC_ERROR_ELEVATE"Unable to elevate, error:"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Scegli come desideri installare ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Una versione più recente di ${APPLICATION_NAME} è già installata! Non è consigliabile installare una versione più vecchia. Se vuoi davvero installare una versione più vecchia, ti consigliamo di rimuovere prima la versione attuale. Scegli l'operazione da eseguire e fai clic su Avanti per continuare."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} è già installato.\nSeleziona l'operazione che desideri eseguire e fai clic su Avanti per continuare."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} è già installato.$\n$\nSeleziona l'operazione che desideri eseguire e fai clic su Avanti per continuare.."
StrCpy$PageReinstall_SAME_Field_2"Aggiungi/Reinstalla i componenti"
@@ -27,14 +27,10 @@ StrCpy $OPTION_SECTION_SC_APPLICATION_Desc "Oggetti fondamentali di ${APPLICATIO
StrCpy$OPTION_SECTION_SC_START_MENU_Desc"Scorciatoia di ${APPLICATION_NAME}"
StrCpy$OPTION_SECTION_SC_DESKTOP_Desc"Scorciatoia del desktop per ${APPLICATION_NAME}."
StrCpy$OPTION_SECTION_SC_QUICK_LAUNCH_Desc"Scorciatoia per ${APPLICATION_NAME} dell'avvio veloce."
StrCpy$UNINSTALLER_APPDATA_SUBTITLE"Rimuovi la cartella dei dati di ${APPLICATION_NAME} dal tuo computer."
StrCpy$UNINSTALLER_APPDATA_LABEL_1"Vuoi eliminare la cartella dei dati di ${APPLICATION_NAME}?"
StrCpy$UNINSTALLER_APPDATA_LABEL_2"Lasciala smarcata per conservare la cartella dei dati per usi futuri o marcala per eliminarla."
StrCpy$UNINSTALLER_APPDATA_CHECKBOX"Sì, elimina questa cartella di dati."
StrCpy$UNINSTALLER_FILE_Detail"Creazione del programma di disinstallazione"
StrCpy$UNINSTALLER_REGISTRY_Detail"Scrittura delle chiavi di registro del programma di installazione"
StrCpy$UNINSTALLER_FINISHED_Detail"Completato"
StrCpy$UNINSTALL_MESSAGEBOX"Non sembra che ${APPLICATION_NAME} sia installato nella cartella '$INSTDIR'.$\nVuoi continuare comunque (non consigliato)?"
StrCpy$UNINSTALL_MESSAGEBOX"Non sembra che ${APPLICATION_NAME} sia installato nella cartella '$INSTDIR'.$$\nVuoi continuare comunque (non consigliato)?"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Velg hvordan du vil installere ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"En nyere versjon av ${APPLICATION_NAME} er allerede installert! Det anbefales ikke at du installerer en eldre versjon. Hvis du virkelig ønsker å installere denne eldre versjonen, er det bedre å avinstallere gjeldende versjon først. Velg hva du vil gjøre og klikk Neste for å fortsette."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} er allerede installert.\nVelg hva du vil gjøre og klikk Neste for å fortsette."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} er installert allerede.$\n$\nVelg hva du ønsker å gjøre og klikk Neste for å fortsette."
StrCpy$PageReinstall_SAME_Field_2"Legg til/installer komponenter på nytt"
StrCpy$MUI_FINISHPAGE_SHOWREADME_TEXT_STRING"Pokaż informacje o wydaniu"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Proces ${APPLICATION_EXECUTABLE} musi zostać zatrzymany $\nCzy chcesz aby instalator zatrzymał je dla ciebie?"
StrCpy$MUI_FINISHPAGE_SHOWREADME_TEXT_STRING"Poka¿ informacje o wydaniu"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Proces ${APPLICATION_EXECUTABLE} musi zostaæ zatrzymany $\nCzy chcesz aby instalator zatrzyma³ je dla ciebie?"
StrCpy$ConfirmEndProcess_KILLING_PROCESSES_TEXT"Zamykam proces ${APPLICATION_EXECUTABLE}."
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"Nie znaleziono procesu!"
StrCpy$PageReinstall_NEW_Field_1"W Twoim systemie jest zainstalowana starsza wersja ${APPLICATION_NAME}. Zalecane jest jej usunięcie przed dalszą instalacją. Wybierz operację którą chcesz wykonać i naciśnij przycisk Dalej."
StrCpy$PageReinstall_NEW_Field_1"W Twoim systemie jest zainstalowana starsza wersja ${APPLICATION_NAME}. Zalecane jest jej usuniêcie przed dalsz¹ instalacj¹. Wybierz operacjê któr¹ chcesz wykonaæ i naciœnij przycisk Dalej."
StrCpy$PageReinstall_NEW_Field_2"Odinstaluj przed instalacja"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Wybierz jak chcesz zainstalować ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Zainstalowana jest nowsza wersja ${APPLICATION_NAME}! Niezalecane jest instalowanie starszej wersji. Jeśli naprawdę chcesz zainstalować starszą wersję lepiej najpierw odinstalować obecną aplikację. Wybierz operację którą chcesz wykonać i naciśnij przycisk Dalej."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} jest już zainstalowany.\nWybierz operację którą chcesz wykonać i naciśnij przycisk Dalej."
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Wybierz jak chcesz zainstalowaæ ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Zainstalowana jest nowsza wersja ${APPLICATION_NAME}! Niezalecane jest instalowanie starszej wersji. Jeœli naprawdê chcesz zainstalowaæ starsz¹ wersjê lepiej najpierw odinstalowaæ obecn¹ aplikacjê. Wybierz operacjê któr¹ chcesz wykonaæ i naciœnij przycisk Dalej."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} jest ju¿ zainstalowany.$\nWybierz operacjê któr¹ chcesz wykonaæ i naciœnij przycisk Dalej."
StrCpy$UNINSTALLER_REGISTRY_Detail"Tworzę wpisy w rejestrze"
StrCpy$UNINSTALLER_FINISHED_Detail"Zakończony"
StrCpy$UNINSTALL_MESSAGEBOX"Nie wygląda na to że ${APPLICATION_NAME} jest zainstalowane w katalogu '$INSTDIR'.$$ Kontynuować mimo tego (nie zalecane)?"
StrCpy$UNINSTALL_ABORT"Dezinstalacja przerwana przez użytkownika"
StrCpy$INIT_NO_QUICK_LAUNCH"Skrót na Pasku Zadań (NIE DOTYCZY)"
StrCpy$INIT_NO_DESKTOP"Skróty na pulpicie (nadpisuje obecne)"
StrCpy$UNINSTALLER_REGISTRY_Detail"Tworzê wpisy w rejestrze"
StrCpy$UNINSTALLER_FINISHED_Detail"Zakoñczony"
StrCpy$UNINSTALL_MESSAGEBOX"Nie wygl¹da na to ¿e ${APPLICATION_NAME} jest zainstalowane w katalogu '$INSTDIR'.$$ Kontynuowaæ mimo tego (nie zalecane)?"
StrCpy$UNINSTALL_ABORT"Dezinstalacja przerwana przez u¿ytkownika"
StrCpy$INIT_NO_QUICK_LAUNCH"Skrót na Pasku Zadañ (NIE DOTYCZY)"
StrCpy$INIT_NO_DESKTOP"Skróty na pulpicie (nadpisuje obecne)"
StrCpy$MUI_FINISHPAGE_SHOWREADME_TEXT_STRING"Mostrar notas de lançamento"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Processos(s) ${APPLICATION_EXECUTABLE} em execução. Estes processos precisam de ser interrompidos.$\\nDeseja que o instalador os termine automaticamente?"
StrCpy$ConfirmEndProcess_KILLING_PROCESSES_TEXT"A terminar os processos ${APPLICATION_EXECUTABLE}."
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"Não foi encontrado o processo a terminar!"
StrCpy$PageReinstall_NEW_Field_1"Uma versão antiga de ${APPLICATION_NAME} está instalada no sistema. É recomendado que você desinstale a versão atual antes de instalar. Selecione a operação que deseja executar e clique em $\"Avançar$\" para continuar."
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Encontrados ${APPLICATION_EXECUTABLE} processo(s) em execução que precisa(m) de ser interrompido(s).$\nDeseja que o instalador o(s) termine por si?"
StrCpy$ConfirmEndProcess_KILLING_PROCESSES_TEXT"A terminar os processos de ${APPLICATION_EXECUTABLE}."
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"Não foi encontrado o processo para terminar!"
StrCpy$PageReinstall_NEW_Field_1"Está instalada no sistema uma versão antiga de ${APPLICATION_NAME}. É recomendado que desinstale a versão atual antes de instalar a mais recente. Selecione a operação que deseja executar e clique em $\"Seguinte$\" para continuar."
StrCpy$PageReinstall_NEW_Field_2"Desinstalar antes de instalar"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Escolha como pretende instalar ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Uma versão mais recente do ${APPLICATION_NAME} já está instalada! Não é recomendada a instalação de uma versão mais antiga. Se realmente deseja instalar esta versão, aconselha-se a desinstalação da versão atual primeiro. Selecione a operação que deseja executar e clique em Avançar para continuar."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} já está instalado.\nSelecione a operação que deseja fazer, e clique Seguinte para continuar."
StrCpy$PageReinstall_OLD_Field_1"Uma versão mais recente da aplicação ${APPLICATION_NAME} já está instalada! Não é recomendada a instalação de uma versão mais antiga. Se realmente deseja instalar esta versão, aconselha-se a desinstalação da versão atual primeiro. Selecione a operação que deseja executar e clique em Avançar para continuar."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} já está instalada.$\nSelecione a operação que deseja realizar e clique em 'Seguinte' para continuar."
@@ -20,21 +20,17 @@ StrCpy $OPTION_SECTION_SC_SHELL_EXT_DetailPrint "A instalar integração para Wi
StrCpy$OPTION_SECTION_SC_START_MENU_SECTION"Atalho do progama no Menu Inicial"
StrCpy$OPTION_SECTION_SC_START_MENU_DetailPrint"A adicionar o atalho de ${APPLICATION_NAME} ao Menu Inicial."
StrCpy$OPTION_SECTION_SC_DESKTOP_SECTION"Atalho da área de trabalho"
StrCpy$OPTION_SECTION_SC_DESKTOP_DetailPrint"A criar atalhos da área de trabalho"
StrCpy$OPTION_SECTION_SC_DESKTOP_DetailPrint"A criar atalhos na área de trabalho"
StrCpy$OPTION_SECTION_SC_QUICK_LAUNCH_SECTION"Atalho de início rápido"
StrCpy$OPTION_SECTION_SC_QUICK_LAUNCH_DetailPrint"A criar atalho de início rápido"
StrCpy$OPTION_SECTION_SC_APPLICATION_Desc"O essencial de ${APPLICATION_NAME}."
StrCpy$OPTION_SECTION_SC_START_MENU_Desc"Atalho de ${APPLICATION_NAME}."
StrCpy$OPTION_SECTION_SC_DESKTOP_Desc"Atalho no ambiente de trabalho de ${APPLICATION_NAME}."
StrCpy$OPTION_SECTION_SC_DESKTOP_Desc"Atalho do ambiente de trabalho para ${APPLICATION_NAME}."
StrCpy$OPTION_SECTION_SC_QUICK_LAUNCH_Desc"Atalho de início rápido de ${APPLICATION_NAME}."
StrCpy$UNINSTALLER_APPDATA_SUBTITLE"Remover a pasta de dados de ${APPLICATION_NAME} do seu computador."
StrCpy$UNINSTALLER_APPDATA_LABEL_1"Deseja remover a pasta de dados de ${APPLICATION_NAME}?"
StrCpy$UNINSTALLER_APPDATA_LABEL_2"Não assinale para manter a pasta de dados para uso mais tarde, ou assinale para apagar a pasta de dados."
StrCpy$UNINSTALLER_APPDATA_CHECKBOX"Sim, remover esta pasta."
StrCpy$UNINSTALLER_FILE_Detail"A escrever o Desinstalador"
StrCpy$UNINSTALLER_REGISTRY_Detail"A escrever chaves de registo do instalador"
StrCpy$UNINSTALLER_FINISHED_Detail"Terminado"
StrCpy$UNINSTALL_MESSAGEBOX"Não parece que ${APPLICATION_NAME} esteja instalado no diretório '$INSTDIR'.$\n$\nContinuar na mesma (não recomendado)?"
StrCpy$UNINSTALL_MESSAGEBOX"Não parece que a aplicação ${APPLICATION_NAME} esteja instalada no diretório '$INSTDIR'.$\n$\nContinuar na mesma (não recomendado)?"
StrCpy$UNINSTALL_ABORT"Desinstalação cancelada pelo utilizador"
StrCpy$INIT_NO_QUICK_LAUNCH"Atalho de Início Rápido (N/A)"
StrCpy$INIT_NO_DESKTOP"Atalho do Ambiente de Trabalho (sobrepõe o existente)"
@@ -42,5 +38,6 @@ StrCpy $UAC_ERROR_ELEVATE "Incapaz de elevar, erro:"
StrCpy$UAC_INSTALLER_REQUIRE_ADMIN"Este instalador precisa de permissões de administrador, tente novamente"
StrCpy$INIT_INSTALLER_RUNNING"O instalador já está em execução."
StrCpy$UAC_UNINSTALLER_REQUIRE_ADMIN"Este desinstalador requer permissões de administrador, tente novamente"
StrCpy$UAC_ERROR_LOGON_SERVICE"O serviço do início de sessão não está em execução, a abortar!"
StrCpy$INIT_UNINSTALLER_RUNNING"O desinstalador já está em execução."
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Escolha como você deseja instalar ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"A versão mais recente do ${APPLICATION_NAME} já está instalado! Não é recomendado que você instale uma versão mais antiga. Se você realmente deseja instalar esta versão mais antiga, é melhor desinstalar a versão atual primeiro. Selecione a operação que deseja executar e clique em Avançar para continuar."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${version} já está instalado.\nSelecione a operação que deseja executar e clique em Avançar para continuar."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} já está instalado.$\n$\nSelecione a operação que você quer realizar e clique Próximo para continuar."
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Выберите, как вы хотите установить ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Новая версия ${APPLICATION_NAME} уже установлена! Не рекомендуется устанавливать старую версию. Если вы действительно хотите установить эту старую версию, то сначала лучше удалить текущую версию. Выберите желаемое действие и нажмите Далее для продолжения."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} уже установлена.\nВыберите желаемое действие и нажмите Далее для продолжения."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} уже установлен.$\n$\nУкажите действие и нажмите Далее для продолжения."
StrCpy$UNINSTALL_MESSAGEBOX"Похоже, что приложение ${APPLICATION_NAME} не установлено в каталог '$INSTDIR'.\nВсе равно продолжить (не рекомендуется)?"
StrCpy$UNINSTALL_MESSAGEBOX"Похоже, что приложение ${APPLICATION_NAME} не установлено в каталог '$INSTDIR'.$\nВсе равно продолжить (не рекомендуется)?"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_TITLE"Už je nainštalovaný"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Vyberte si, ako chcete nainštalova<76> ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Novšia verzia ${APPLICATION_NAME} je už nainštalovaná! Neodporúèam vám nainštalova<76> staršiu verziu. Ak naozaj chcete nainštalova<76> túto staršiu verziu, je lepšie najprv odinštalova<76> aktuálnu verziu. Vyberte operáciu, ktorú chcete vykona<6E>, a kliknite na tlaèidlo Ïalej pre pokraèovanie."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} je už nainštalovaná.\nVyberte operáciu, ktorú chcete vykona<6E>, a kliknite na tlaèidlo Ïalej pre pokraèovanie."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} je už nainštalovaná.$\n$\nVyberte operáciu, ktorú chcete vykona<6E>, a kliknite na tlaèidlo Ïalej pre pokraèovanie."
StrCpy$OPTION_SECTION_SC_DESKTOP_Desc"Zástupca na ploche pre ${APPLICATION_NAME}."
StrCpy$OPTION_SECTION_SC_QUICK_LAUNCH_Desc"Zástupca na paneli úloh pre ${APPLICATION_NAME}."
StrCpy$UNINSTALLER_APPDATA_SUBTITLE"Zmaza<EFBFBD> dátový prieèinok ${APPLICATION_NAME}'s z vášho poèítaèa."
StrCpy$UNINSTALLER_APPDATA_LABEL_1"Naozaj chcete zmaza<7A> prieèinok s dátami ${APPLICATION_NAME}'s ?"
StrCpy$UNINSTALLER_APPDATA_LABEL_2"Ponechajte nezaškrtnuté, ak chcete prieèinok s dátami ponecha<68> na neskoršie použitie, alebo zaškrtnite, ak chcete prieèinok zmaza<7A>."
StrCpy$UNINSTALLER_APPDATA_CHECKBOX"Áno, zmaza<7A> tento prieèinok."
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_TITLE"Program je že nameščen"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Izberite način namestitve programa ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Novejša različica programa ${APPLICATION_NAME} je že nameščena! Ni priporočljivo namestiti starejše. V kolikor želite vseeno nadaljevati z namestitvijo, prej odstranite obstoječo različico. Izberite opravilo in pritisnite gumb za nadaljevanje."
StrCpy$PageReinstall_SAME_Field_1"Program ${APPLICATION_NAME} ${VERSION} je že nameščen.Izberite opravilo in pritisnite gumb za nadaljevanje."
StrCpy$PageReinstall_SAME_Field_1"Program ${APPLICATION_NAME} ${VERSION} je že nameščen.$\n$\nIzberite opravilo, ki ga želite izvesti in kliknite za nadaljevanje."
StrCpy$MUI_FINISHPAGE_SHOWREADME_TEXT_STRING"Mostrar las notas de la versión"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"El/los proceso/s ${APPLICATION_EXECUTABLE} debe/n ser detenidos.$\n¿Quiere que el instalador lo haga por usted?"
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"¡Proceso para detener no encontrado!"
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"¡Proceso a finalizar no encontrado!"
StrCpy$PageReinstall_NEW_Field_1"Una versión anterior de ${APPLICATION_NAME} se encuentra instalada en el sistema. Se recomienda de instalar la versión actual antes de instalar la nueva. Seleccione la operacion deseada y haga click en Siguiente para continuar."
StrCpy$PageReinstall_NEW_Field_2"Desinstalar antes de instalar"
StrCpy$PageReinstall_NEW_Field_3"No desinstalar"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_TITLE"Ya está instalado"
StrCpy$PageReinstall_OLD_Field_1"Una nueva versión de ${APPLICATION_NAME} ya está instalada. No es recomendable instalar una versión anterior. Si realmente quiere instalar esta versión anterior, es mejor que desinstale la versión actual primero. Seleccione la operación que desea realizar y pulse Next para continuar."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} ya está instalada.\nSeleccione la operación que desea realizar y pulse Next para continuar."
StrCpy$PageReinstall_OLD_Field_1"Una nueva versión de ${APPLICATION_NAME} ya está instalada. No es recomendable instalar una versión anterior. Si realmente quiere instalar esta versión anterior, es mejor que desinstale la versión actual primero. Seleccione la operación que desea realizar y pulse Siguiente para continuar."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} ya está instalado.$\n$\nSeleccione la operación que desea realizar y haga click en Siguiente para continuar."
StrCpy$OPTION_SECTION_SC_START_MENU_Desc"Acceso Directo de ${APPLICATION_NAME}"
StrCpy$OPTION_SECTION_SC_DESKTOP_Desc"Acceso Directo de Escritorio para ${APPLICATION_NAME}"
StrCpy$OPTION_SECTION_SC_QUICK_LAUNCH_Desc"Lanzador Rápido de Accesos Director para ${APPLICATION_NAME}."
StrCpy$UNINSTALLER_APPDATA_SUBTITLE"Elimine la carpeta de datos de ${APPLICATION_NAME} del computador."
StrCpy$UNINSTALLER_APPDATA_LABEL_1"¿Desea eliminar la carpeta de datos de ${APPLICATION_NAME}?"
StrCpy$UNINSTALLER_APPDATA_LABEL_2"Déjelo sin marcar para mantener la carpeta de datos para uso posterior o márquelo para eliminar la carpeta de datos."
StrCpy$UNINSTALLER_APPDATA_CHECKBOX"Sí, elimine esta carpeta de datos."
StrCpy$UNINSTALLER_REGISTRY_Detail"Escribiendo claves en el registro del instalador"
StrCpy$UNINSTALLER_FINISHED_Detail"Terminado"
StrCpy$UNINSTALL_MESSAGEBOX"Parece que ${APPLICATION_NAME} no está instalado en el directorio '$INSTDIR'.$$ ¿Continuar de todos modos? (No Recomendado)"
StrCpy$UNINSTALL_MESSAGEBOX"Parece que ${APPLICATION_NAME} no está instalado en el directorio '$INSTDIR'.$$ ¿Continuar de todos modos? (No recomendado)"
StrCpy$UNINSTALL_ABORT"Desinstalación cancelada por el usuario"
StrCpy$INIT_NO_QUICK_LAUNCH"Atajo de inicio rápido (N/A)"
StrCpy$INIT_NO_DESKTOP"Atajo de escritorio (sobreescribe el existente)"
@@ -42,5 +38,6 @@ StrCpy $UAC_ERROR_ELEVATE "No se ha podido elevar, error:"
StrCpy$UAC_INSTALLER_REQUIRE_ADMIN"El instalador requiere acceso administrativo, inténtelo de nuevo"
StrCpy$INIT_INSTALLER_RUNNING"El instalador ya se encuentra en ejecución"
StrCpy$UAC_UNINSTALLER_REQUIRE_ADMIN"El desinstalador requiere acceso administrativo, inténtelo de nuevo"
StrCpy$UAC_ERROR_LOGON_SERVICE"Servicio Inicio de sesión no se está ejecutando, abortando!"
StrCpy$INIT_UNINSTALLER_RUNNING"El desinstalador ya se encuentra en ejecución."
StrCpy$MUI_FINISHPAGE_SHOWREADME_TEXT_STRING"Mostrar notas de la versión"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Se encontrarion ${APPLICATION_EXECUTABLE} proceso(s) que debe/n ser detenidos.$\"$\n$\"¿Quiere que el instalador lo haga por usted?"
StrCpy$ConfirmEndProcess_KILLING_PROCESSES_TEXT"Parando el proceso ${APPLICATION_EXECUTABLE}."
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"Proceso a detener no encontrado!"
StrCpy$PageReinstall_NEW_Field_1"Una versión anterior de ${APPLICATION_NAME} esta instalada en el sistema. Es recomendado que quite esta versión antes de instalar. Elija la operación a realizar y seleccione Siguiente para continuar."
@@ -8,39 +9,35 @@ StrCpy $PageReinstall_NEW_Field_3 "No des-instalar."
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Elija como desea instalar ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Una versión mas reciente de ${APPLICATION_NAME} esta actualmente instalada! No es recomendado que instale una versión antigua. Si realmente desea instalar esta versión obsoleta, es mejor que des-instale la versión actual primero. Seleccione la operación que desea realizar y presione en Siguiente para continuar. "
StrCpy$PageReinstall_SAME_Field_1"La ${APPLICATION_NAME} ${VERSION} ya está instalado.$\n$\nSeleccione la operación que desea realizar y haga click en Siguiente para continuar."
StrCpy$UNINSTALLER_REGISTRY_Detail"Escribiendo claves de Registro del Instalador"
StrCpy$UNINSTALLER_FINISHED_Detail"Terminado"
StrCpy$UNINSTALL_MESSAGEBOX"Parece que ${APPLICATION_NAME} no esta instalado en el directorio '$INSTDIR'.$\n$\n¿Continuar de todos modos? (No recomendado)"
StrCpy$UNINSTALL_ABORT"Des-instalación abortada por el usuario"
StrCpy$INIT_NO_QUICK_LAUNCH"Atajo de Acceso Rápido (N/A)"
StrCpy$INIT_NO_DESKTOP"Acceso Directo en Escritorio (Sobrescribe existentes)"
StrCpy$UAC_ERROR_ELEVATE"No se ha podido elevar, error:"
StrCpy$UAC_INSTALLER_REQUIRE_ADMIN"Este instalador requiere acceso Administrador, intente de nuevo. "
StrCpy$INIT_INSTALLER_RUNNING"El instalador ya esta corriendo."
StrCpy$UAC_UNINSTALLER_REQUIRE_ADMIN"Este des-instalador requiere acceso administrador, intente de nuevo"
StrCpy$UAC_ERROR_LOGON_SERVICE"Servicio Inicio de sesión no se está ejecutando, abortando!"
StrCpy$INIT_UNINSTALLER_RUNNING"El des-instalador ya esta corriendo"
StrCpy$SectionGroup_Shortcuts"Accesos Directos"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Found ${APPLICATION_EXECUTABLE} process(s) which need to be stopped.$\nDo you want the installer to stop these for you?"
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} is already installed.\r\nSelect the operation you want to perform and click Next to continue."
StrCpy$OPTION_SECTION_SC_SHELL_EXT_SECTION"Integration for Windows Explorer"
StrCpy$OPTION_SECTION_SC_SHELL_EXT_DetailPrint"Installing Integration for Windows Explorer"
StrCpy$OPTION_SECTION_SC_QUICK_LAUNCH_Desc"Quick Launch shortcut for ${APPLICATION_NAME}."
StrCpy$UNINSTALL_MESSAGEBOX"It does not appear that ${APPLICATION_NAME} is installed in the directory '$INSTDIR'.$\r$\nContinue anyway (not recommended)?"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Välj hur du vill installera ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"En nyare version av ${APPLICATION_NAME} är redan installerad! Det rekommenderas inte att du installerar en äldre version. Om du verkligen vill installera denna äldre versionen, är det bättre att du avinstallerar den nuvarande versionen först. Välj den åtgärd du vill utföra och klicka Nästa för att fortsätta."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} är redan installerad.\nVälj den åtgärd du vill utföra och klicka Nästa för att fortsätta."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} är redan installerad.$\n$\nVälj den åtgärd du vill utföra och klicka på Nästa för att fortsätta."
StrCpy$PageReinstall_OLD_Field_1"${APPLICATION_NAME} uygulamasýnýn daha yeni sürümü zaten yüklü! Daha eski bir sürümünü yüklemeniz önerilmez. Gerçekten bu eski sürümü yüklemek isterseniz, ilk olarak geçerli sürümü kaldýrmanýz tavsiye edilir. Yapmak istediðiniz iþlemi seçin ve devam etmek üzere Ýleri týklayýn."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} zaten yüklü.\n\nYapmak istediğiniz işlemi seçin ve devam etmek için İleri tıklayın."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} zaten yüklü.$\n$\nYapmak istediðiniz iþlemi seçin ve devam etmek için Ýleri týklayýn."
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Знайдено процес(и) ${APPLICATION_EXECUTABLE}, які необхідно зупинити.$\nХочете щоб програма установки зробила це самостійно?"
StrCpy$ConfirmEndProcess_KILLING_PROCESSES_TEXT"Завершення процесів ${APPLICATION_EXECUTABLE}."
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"Не знайдено процеси, які необхідно зупинити!"
StrCpy$PageReinstall_NEW_Field_1"Знайдено застарілу версію програми ${APPLICATION_NAME}. Рекомендуємо її спочатку видалити. Оберіть подальшу дію та натисніть $\"Далі$\"."
StrCpy$PageReinstall_NEW_Field_1"У вашої системі встановлена застаріла версія додатку ${APPLICATION_NAME}. Рекомендуємо видалити її перед початком встановлення поточної версії. Оберіть подальшу дію та натисніть $\"Далі$\"."
StrCpy$PageReinstall_NEW_Field_2"Видалити перед установкою"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Оберіть, як ви хочете установити ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Знайдено новішу версію ${APPLICATION_NAME}! Ми не рекомендуємо встановлювати стару версію. Якщо ви все ж бажаєте встановити цю версію, спочатку видаліть поточну версію. Оберіть подальшу дію та натисніть $\"Далі$\"."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} вже встановлено.↩\nОберіть подальшу дію та натисніть $\"Далі$\"."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} вже встановлено.$\n$\nОберіть подальшу дію та натисніть $\"Далі$\" для продовження."
ctx->owncloud_context->csync_ctx=ctx;// back reference
}
/* vim: set ts=4 sw=4 et cindent: */
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
