The OAuth authentication brings the broweser to the front, once thats done the wizard continues.
But the wizard ist now most probably hidden behind the browser
This code was actually not breaking most cookie handling by accident.
As the raw cookies where not split properly we added cookies with values like
"key: val; key2 = val2; key3 = val3"
When the code was corrected we overwrote the newer values in the jar with
the old ones from a request.
This was done because the propagator jobs where running in a thread a long
time ago, but this is no longer the case.
(Also QAtomicInt::load is marked as deprecated now)
For a usual file sync event we check for actual changes in the local file,
after an unlock the local file might be unchanged so we need to sync it anyhow.
Fixes: owncloud/enterprise#3609
The original code from csync was stopping at any error.
But we have been whitelisting soeme http error code one by one
to ignore the directory instead of aborting the sync.
However, as there are more requests to continue the sync in case
of error, just ignore most HTTP errors
Issue #7586
On windows we do a test to know if we should change the case of the files,
but that conflict with the test that checks if the file was still there
when the filename is actually the same. Which can happen with virtual files
as they have two representation (the one with and without suffix).
When an item is downloaded because it is restored, it shall be shown in the
sync protocol.
(It is also going to be shown in the not synchronized for a short while, but
that's fine)
When the gui thread blocks for several seconds it's possible for the
ConnectionValidator to timeout and decide that the account is
unreachable. It will then terminate all sync runs.
Increasing the timeout makes this less likely to happen. The tradeoff is
that real disconnects will not be detected as quickly.
This does not address the root cause but makes the symptom less likely
to appear.
Previously the source was deleted (or attempted to be deleted), even if
the new location was not acceptable for upload. This could make data
unavilable on the server.
For #7410
By introducing a PropagateRootDirectory job that explicitly
separates the directory deletion jobs from all the other jobs.
Note that this means that if there are errors in subJobs the
dirDeletionJobs won't get executed.
Previously the job would only become "active" when the downloads
started. That meant that arbitrarily many hash computations could be
queued at the same time.
Since the the file was opened during future creation this could lead to
a "too many open files" problem if there were lots of new-new conflicts.
To change this:
- Make PropagateDownload become active when computing a hash
asynchronously.
- Make the computation future open the file only once it gets run. This
will make it less likely for this problem to occur even if thousands
of these futures are queued.
For #7372
Previously fatal error texts were duplicated: Once they entered the
SyncResult via the SyncFileItem and once via syncError().
syncError is intended for folder-wide sync issues that are not pinned
to particular files. Thus that duplicated path is removed.
For #5088
Previously the pin states of deleted files stayed in the 'flags'
database and could be inadvertently reused when a new file with the same
name appeared. Now they are deleted.
To make this work right, the meaning of the 'path' column in the 'flags'
table was changed: Previously it never had the .owncloud file suffix.
Now it's the same as in metadata.path.
This takes the safe parts from #7274 for inclusion in 2.6. The more
elaborate database schema changes (why use 'path' the join the two
tables in the first place?) shall go into master.
Previously RequestEtagJob did return the etag verbatim (including extra
quotes) while the db had the parsed form. That caused the etag
comparison during discovery move detection to always fail. The test
didn't catch it because the etags there didn't have quotes.
Now:
- RequestEtagJob will parse the etag, leading to a consistent format
- Tests have etags with quotes, detecting the problem
- Close the UploadDevice to close the QFile after the PUT job is done.
This allows winvfs to get an oplock on the file later.
- Don't rely on QFile::fileName() to be valid after
openAndSeekFileSharedRead() was called. The way it is openend on
Windows makes it have an empty filename.
If one adds a new file to an online-only folder the previous behavior
was to upload the file in one sync and dehydrate it in the next. Now
these new files get set to Unspecified pin state, making them retain
their data.
Instead of all at once, to reduce peak memory use.
Changing UploadDevice in this way requires keeping the file open for the
duration of the upload. It also means changes to open(), seek(), close()
to ensure that uses of the device work right when a request needs to
be resent.
Since Qt does not yet transparently resend HTTP2 requests in some cases
we do it manually.
The test showed a problem where the initial non-200 reply would close
the target temporary file and the follow-up request couldn't store any
data. Removing that close() call is safe because there also is a
_saveBodyToFile flag that guards writes to the target file.
The previous patch ensured that the sqlite temporaries weren't deleted
and recreated for every sync run, but there was still time between
client startup and the first sync run where they would have the
"needs-sync" icon.
Previously "no-availability" meant db-error and querying the
availability of a nonexistant path returned AllHydrated.
Now, the availability has a DbError and a NoSuchItem error case.
Saying "Currently available locally" sounds more like an indicator than
"Availably locally" does. Centralizing translations avoids consistency
issues between shell context menus and sync folder context menu.
The db-close operation is likely a leftover from when the SyncEngine
owned its own db connection and serves no purpose anymore.
Closing the db causes the removal of the temporary wal and shm files.
These files are recreated when the db is opened again, which happens
almost immediately.
This is a problem for winvfs because the delete-recreate step wipes the
exclusion state on these files just after the sync is done. That meant
that the db temporaries permanently had a "needs sync" icon marker shown
in the explorer.
Avoiding reopening the db also reduces the number of log messages per
sync.
Previously these result codes during remote discovery of the sync root
would not cause an error and the discovery would get stuck.
Also extends RemoteDiscovery tests to check for errors on the root item.
Previously if one set the instruction to ERROR while forgetting to set
an error status, it'd propagate as FileIgnored. Now the default is
NormalError for INSTRUCTION_ERROR and FileIgnored for
INSTRUCTION_IGNORE.
The idea is that the user's question is "is this folder's data available
offline?" and not "does this folder have AlwaysLocal pin state?".
The the answers to the two questions can differ: an always-local
folder can have subitems that are not always-local and are dehydrated.
The new availability enum intends to describe the answer to the user's
actual question and can be derived from pin states. If pin states aren't
stored in the database the way of calculating availability will depend
on the vfs plugin.
The pin state is a per-item attribute that has an effect on _type:
AlwaysLocal dehydrated files will be marked for hydration and OnlineOnly
hydrated files will be marked for dehydration.
Where exactly this effect materializes depends on how the pin states are
stored. If they're stored in the db (suffix) the dbEntry._type is
changed during the discovery.
If the pin state is stored in the filesystem, the localEntry._type must
be adjusted by the plugin's stat callback.
This patch makes pin states behave more consistently between plugins.
Previously with suffix-vfs pin states only had an effect on new remote
files. Now the effect of pinning or unpinning files or directories is as
documented and similar to other plugins.
1. The _firstJob is usually deleted by the time the PropagateDirectory
finishes. (deleteLater() is called early)
2. The PropagateDirectory::_item and PropagateRemoteMkdir::_item point
to the same SyncFileItem anyway. This code is a leftover from when
each job had its own instance.
Previously removing the vfs suffix of a file always triggered a
conflict. Now it may just cause a file download.
This was done because users expected symmetry in the rename actions and
renaming foo -> foo.owncloud already triggers the "make the file
virtual" action. Now foo.owncloud -> foo triggers the "download the
contents" action.
Users can rename a file *and* add/remove the vfs suffix at the same time
leading to very complex sync actions. This patch doesn't add support for
them, but adds tests and makes sure these cases do not cause unintened
behavior.
The rename will be propagated, but the users's hydrate/dehydrate request
will be ignored.
This was not required with 2.5 because a size of 0 was ignorted when comparing
size by the csync updater, to be compatible with very old version of the database.
But the we discovery will still think the file is changed if the database contains
a size of 0
It seems that sometimes the tray implementation isn't ready on system
startup. Retrying later seems to not help. Delaying the start of the
client is the workaround that people have reported as effective.
When owncloud is started during desktop startup the tray may not yet
be running when the client starts. This will make the client attempt
to create a tray icon again after 10 seconds if there's no tray
during initial startup.
This could fix a problem where the client incorrectly decides to delete
local data.
Previously any sqlite3_step() return value that wasn't SQLITE_ROW would
be interpreted as "there's no more data here". Thus an sqlite error at a
bad time could cause the remote discovery to fail to read an unchanged
subtree from the database. These files would then be deleted locally.
With this change sqlite errors from sqlite3_step are detected and
logged. For the particular case of SyncJournalDb::getFilesBelowPath()
the error will now be propagated and the sync run will fail instead of
performing spurious deletes.
Note that many other database functions still don't distinguish
not-found from error cases. Most of them won't have as severe effects on
affected sync runs though.
It still reads and writes the old format too, but all newly stored
client certs will be in the new form.
For #6776 because Windows limits credential data to 512 bytes in older
versions.
By default, plugins are only searched next to the binary or next to the
other Qt plugins. This optional build variable allows another path to be
configured.
The idea is that on linux the oC packaging probably wants the binary in
something like /opt/owncloud/bin and the plugins in
/opt/owncloud/lib/plugins.
Similarly, distribution packagers probably don't want the plugins next
to the binary or next to the other Qt plugins. This flag allows them to
configure another path that the executable will look in.
doExpand() is called when the selective sync editing mode is enabled in
the folder settings view. Previously it'd set the expansion to be
exactly the root items. Now, it just expands any root items that are
currently collapsed, leaving all other item expansion unchanged.
With the recent bugfix to avoid sending messages on dead connections
0bfe7ac250c54f5415c0a794c7b271428e83c3cf
the client now crashed if readyRead() was received after disconnected()
for the socket as the listener for that connection was already removed.
This code fixes it by still invoking the handler from readyRead() but
passing a SocketListener that won't attempt to send messages.
As far as I'm aware local discovery can be skipped on folders that are
selective-sync blacklisted, so a local discovery is required when an
entry is removed from the blacklist.
Also rename
avoidReadFromDbOnNextSync() -> schedulePathForRemoteDiscovery()
since the old name might also imply it's not read from db in the local
discovery - which is not the case. Use Folder::
schedulePathForLocalDiscovery() for that.
Creating a new virtual file and replacing a file with a virtual one now
have their own text in the protocol, not just "Downloaded".
To do this, the SyncFileItem type is kept as
ItemTypeVirtualFileDehydration for these actions. Added new code to
ensure the type isn't written to the database.
While looking at this, I've also added documentation on SyncFileItem's
_file, _renameTarget, _originalFile and destination() because some of
the semantics weren't clear.
That change will be useful for the notifications. Previously the
dehydrated files were reported as "newly downloaded", now they're
reported as "updated".
That just complicated things. It's ok if Vfs is not a fully abstract
interface class.
The pinstate-in-db methods are instead provided directly on Vfs and
VfsSuffix and VfsOff use them to implement pin states.
The start() method is simply non-virtual and calls into startImpl() for
the plugin-specific startup code.
The block of code that propagated attributes etc from the previously
existing file was placed *after* the block that renamed the previously
existing file to a conflict name. That meant the propagation didn't work
in the conflict case.
- SyncJournalDB functions now behind internalPinStates() to avoid
accidental usage, when nearly everyone should go through Vfs.
- Rename Vfs::getPinState() to Vfs::pinState()
Any folder with a (potentially deeply) contained error will have
StatusWarning. StatusExcluded marks exclusions. The difference is useful
to know for VFS.
This will be used in conjunction with vfs plugins that detect whether a
file has a pending hydration/dehydration through independent means and
communicate that to the discovery through local file type.
Since 'placeholder' just means that it's an item of the special type
that the vfs plugin can deal with - no matter whether hydrated or
dehydrated - all done items should become placeholders. Even
directories.
Now every file that passes through updateMetadata() will be converted to
a placeholder if necessary.
On Linux and Windows the file watcher can't distinguish between changes
that were caused by the process itself, like during a sync operation,
and external changes. To work around that the client keeps a list of
files it has touched and blocks notifications on these files for a bit.
The duration of this block was originally and arbitrarily set at 15
seconds. During manual tests I regularly thought there was a bug when
syncs didn't trigger, when the only problem was that my changes happened
too close to a previous sync operation.
This change reduces the duration to three seconds. I imagine that this
is still enough.
Also use std::chrono while at it.
Also, calling deleteLater() on jobs is unnecessary (they autodelete
after finished()) and deleting the attached QSettings is also
unnecessary because the settings object is parented to the job.
Seeing "Currently available online only" for a currently hydrated file
was odd. It makes sense since current hydration status and pin state are
independent.
The new text will say something like "Currently available, but marked
online only" to better indicate that the file might be dehydrated later
since it wasn't pinned.
supportsSelectiveSync(): clearer than !supportsVirtualFiles() and allows
extra logic
isVfsOnOffSwitchPending(): Somewhat awkward way of dealing with the
phase between a user requesting vfs state to be switched and it
actually happening
slotDiscoveryJobFinished -> slotDiscoveryFinished
slotFinished -> slotPropagationFinished
This should be clearer. Particular the
slotFinished -> finalize -> emit finished()
chain was confusing before.
This allows enabling and disabling vfs.
To distinguish this operation from setting the root pin state, the
availability setting is adjusted as well to be similar to the
menu that shows in the shell extensions.
It has a destructor and these operations make sense. Particularly the
move is important for code like:
Result<x, y> foo() { Result<x, y> v; return v; }
because the move-ctor will not autogenerate if x or y are not trivially
destructible.
The idea is to allow folders (and later maybe files?) to be
- pinned to be available locally
- pinned to be online only
- inherit their pin from the parent
Where this pinning only controls the default for new files.
Subfolders may have a different pin state, and contained files
may be hydrated or dehydrated based on user actions.
This value is stored in a new 'flags' table. The idea is to store
data there that doesn't necessarily exist for each metadata entry.
The selective sync state could be migrated to this table.
This is just a port to QtTest, I did not change the layout of the test.
I did search and replace to replace the assert with QCOMPARE/QVERIFY
I still call setup and setup_init like before (only explicitly, now)
Also ported the preformence tests to QBENCHMAK because windows don't have
gettimeofday.
Relates #6358
This is to avoid issues on OSX, where the ._ prefix has special meaning.
Originally (before 2.3.2) ._ was necessary to guarantee exclusion. But
since then the .sync_ prefix is excluded as well.
This does not affect existing database files.
Previously there'd likely be a mess if a 2.6 winvfs folder was attempted
to be used with a 2.5 client. Now the older clients will ignore these
folders.
This helps support 2.5 settings where there are virtual files in the
tree but new files aren't created virtual.
It's also a prelude for #6815
There's currently no way of
- upgrading vfs plugins (a silent suffix->winvfs upgrade is attempted
once only, when moving to master)
- disabling vfs capabilities outright
Inh most case we already have a record from before, so avoid doing a useless
lookup in the database.
In owncloudpropagator.cpp, directories do not have a checksum so no need
to call a function that preserves it
When enabling TOKEN_AUTH_ONLY, the code path using QPainter is disabled.
So we also don't need the includes.
This header is not available for Remarkable.
The E2EE code path would get the engine to go wrong in case of db error.
It's just better to have a failing upload or failing mkdir later in those
cases.
Emitting signals from a ctor is a bad idea anyway
Signed-off-by: Kevin Ottens <kevin.ottens@nextcloud.com>
Migration from 2.4: fallback to move file by file if directory move failed
This can happen if the directory already exist because, say, it was
created by the ownCloud outlook plugin which save its file in the same directory
OAuth2 access token typically only has a token valid for 1 hour.
Before this patch, when the token was timing out during the sync, the
sync was aborted, and the ConnectionValidator was then requesting a new
token, so the sync can be started over.
If the discovery takes longer than the oauth2 validity, this means that
the sync can never proceed, as it would be always restarted from scratch.
With this patch, we try to transparently renew the OAuth2 token and restart
the jobs that failed because the access token was invalid.
Note that some changes were required in the GETFile job because it handled
the error itself and so it was erroring the jobs before its too late.
Issue #6814
- adjust virtual file path handing
- helpers for vfs suffix adding/removal
- helpers for isDirectory/isVirtual on SyncJournalRecords
- be clear about what PathTuple _local/_server mean
So we can quickly query the items in a parent directory
This uses a custom slite3 function, which means that when downgrading the client,
or using another tool to add entries in the database, any insertion in the metadata
table will produce an error: "unknown function: parent_hash()"
(This will crash the client 2.5)
If the server does not set the mtime, it is not a big problem for the
synchronisation.
The test was used before so we could do a PROPPATCH for server that did not
support this header. But now that all server supports that we don't need to
to the check. (We do not do the PROPPATCH since we got rid of the neon
dependency)
Apparently, it may happen that some backend don't support setting mtime
and this can lead to this error.
https://github.com/owncloud/client/issues/6797
We need to use the user id to check if we are connected to the right account.
These might be different from the HTTP Basic Auth login. (LDAP setups)
When the account was configured as an oauth2 account form the wisard, the
http_user was already set correctly to the user id. But when the server is
upgrading from basic auth to oauth2, we need to pick the right login.
Note that Account::davUser() already defaults to the HTTP user when none
is set, so this means the upgrade will be fine if this is not set in the
config.
Issues:
https://github.com/owncloud/oauth2/issues/109https://github.com/owncloud/enterprise/issues/2781
And test the Remove/Remove case.
This means we need to always query the database for all the entries.
This showed another small bug in the test in which sync item for virtual
files at the root could have a slash in front of them.
When resolving a conflict because the file was just updated on the server,
we write all the metadata on the database immediatly, so INSTRUCITON_NONE
is enough and UPDATE_METADATA is not needed
The previous code considered the also HTTP 207 code without the
application/xml header to have this message.
httpCode 0 does not make much sense anyway.
This change the behavior to consider any 2xx without the xml header
to show this error message
Since we do not recurse within some directories, many files are not seen.
The stale entry will cleanup by themself as the sync engine try to remove
the files that are already removed.
Should we need to actually do this cleanup, it should be dotected in the
discovery.
Move the finialization in its own function.
This allow to save a bit of code duplication.
Also change the order of the parameter in the constructor for consistency
Unfortunately to do this, the local update phase must write to the
database, creating a new side-effect and order dependency (local update
must run before remote update).
Fixes two bugs that appeared since the introduction of the struct:
- when reading permissions from the journal, null ("") was read as
empty-not-null
- when reading permissinos from the server, empty ("") was read as null
Addresses #4608
The check was added for #6317 in commit
13eb64584f.
We did see missing mtimes in replies in tests with live servers though.
Possibly those were old incomplete responses cached in the stat cache?
Installing to lib/${APPLICATION_EXECUTABLE} has caused a bunch of
irritations in the past and subtle annoying to fix bugs. To avoid name
clashes with branded clients ${APPLICATION_EXECUTABLE} becomes now
part of the filename instead of the subfolder.
The concrete motivation to change this now is that on Windows there
is no RPATH and it's not possible to run owncloud directly from the
Craft Root folder, which is nice when you're developing on Windows.
It would have been possible to change this just for Windows but as
written earlier this has caused lots of issues and thus I think it's
a good idea to just stay consistent accross platforms when touching it.
Issue #6574
When there is an error in the advanced page, OwncloudAdvancedSetupPage::updateStatus
(and others) call completeChanged(), which is connected to
QWizardPrivate::_q_updateButtonStates which will re-enable the back button from the
last page.
When the user click "back" and re-open the browser, the account's credentials
already have a oauth token set. So the call to the API to get a new token fails
because we use the previous token instead of using the client's secret_id.
Fix this with the HttpCredentials::DontAddCredentialsAttribute.
Now, this is still not working because the session cookies are confusing the
server. So we'll clear the cookies when re-opening the browser
In FolderStatusModel::slotLscolFinishedWithError, the call to parentInfo->resetSubs
deleted the 'job' and the reply 'r' which we accessed later to get the error code.
Fix this problem twice by
1) Get the error code before caling resetSubs
2) in FolderStatusModel::SubFolderInfo::resetSubs, call deleteLater instead of delete
Regression introduced in commit d69936e0
Issue #6562
The problem here is that we were sometimes allocating the error_string with
qstrdup, which need to be released with delete[] and not free().
Simplify the code by using QString instead.
```
==7230== Mismatched free() / delete / delete []
==7230== at 0x4C2E10B: free (vg_replace_malloc.c:530)
==7230== by 0x57C2321: csync_s::reinitialize() (csync.cpp:247)
==7230== by 0x548130F: OCC::SyncEngine::finalize(bool) (syncengine.cpp:1212)
==7230== by 0x5481223: OCC::SyncEngine::handleSyncError(csync_s*, char const*) (syncengine.cpp:746)
==7230== by 0x5483E78: OCC::SyncEngine::slotDiscoveryJobFinished(int) (syncengine.cpp:965)
==7230== by 0x5495E34: QtPrivate::FunctorCall<QtPrivate::IndexesList<0>, QtPrivate::List<int>, void, void (OCC::SyncEngine::*)(int)>::call(void (OCC::SyncEngine::*)(int), OCC::SyncEngine*, void**) (qobjectdefs_impl.h:134)
==7230== by 0x5495D92: void QtPrivate::FunctionPointer<void (OCC::SyncEngine::*)(int)>::call<QtPrivate::List<int>, void>(void (OCC::SyncEngine::*)(int), OCC::SyncEngine*, void**) (qobjectdefs_impl.h:167)
==7230== by 0x5495CB5: QtPrivate::QSlotObject<void (OCC::SyncEngine::*)(int), QtPrivate::List<int>, void>::impl(int, QtPrivate::QSlotObjectBase*, QObject*, void**, bool*) (qobjectdefs_impl.h:396)
==7230== by 0xA9BF2E1: QObject::event(QEvent*) (in /usr/lib/libQt5Core.so.5.11.0)
==7230== by 0x64BE983: QApplicationPrivate::notify_helper(QObject*, QEvent*) (in /usr/lib/libQt5Widgets.so.5.11.0)
==7230== by 0x64C625A: QApplication::notify(QObject*, QEvent*) (in /usr/lib/libQt5Widgets.so.5.11.0)
==7230== by 0xA994BC8: QCoreApplication::notifyInternal2(QObject*, QEvent*) (in /usr/lib/libQt5Core.so.5.11.0)
==7230== Address 0x225b2640 is 0 bytes inside a block of size 50 alloc'd
==7230== at 0x4C2DC6F: operator new[](unsigned long) (vg_replace_malloc.c:423)
==7230== by 0xA7E8FC8: qstrdup(char const*) (in /usr/lib/libQt5Core.so.5.11.0)
==7230== by 0x53F5750: OCC::DiscoveryJob::remote_vio_opendir_hook(char const*, void*) (discoveryphase.cpp:666)
==7230== by 0x57E1278: csync_vio_opendir(csync_s*, char const*) (csync_vio.cpp:39)
==7230== by 0x57D718F: csync_ftw(csync_s*, char const*, int (*)(csync_s*, std::unique_ptr<csync_file_stat_s, std::default_delete<csync_file_stat_s> >), unsigned int) (csync_update.cpp:674)
==7230== by 0x57C1B05: csync_update(csync_s*) (csync.cpp:109)
==7230== by 0x53F5BCC: OCC::DiscoveryJob::start() (discoveryphase.cpp:718)
==7230== by 0x54B8F74: OCC::DiscoveryJob::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) (moc_discoveryphase.cpp:494)
==7230== by 0xA9BF2E1: QObject::event(QEvent*) (in /usr/lib/libQt5Core.so.5.11.0)
==7230== by 0x64BE983: QApplicationPrivate::notify_helper(QObject*, QEvent*) (in /usr/lib/libQt5Widgets.so.5.11.0)
==7230== by 0x64C625A: QApplication::notify(QObject*, QEvent*) (in /usr/lib/libQt5Widgets.so.5.11.0)
==7230== by 0xA994BC8: QCoreApplication::notifyInternal2(QObject*, QEvent*) (in /usr/lib/libQt5Core.so.5.11.0)
==7230==
```
We want to keep the body so we can get the message from it
(Issue #6459)
TestDownload::testErrorMessage did not fail because the FakeErrorReply
did not emit readyRead and did not implement bytesAvailable.
Signed-off-by: Kevin Ottens <kevin.ottens@nextcloud.com>
Otherwise a interrupted or unsuccessful download would mean that the
download-intend was forgotten. The next sync would reestablish the
virtual file instead.
Also, if there is too-new configuration, backup the file, show a
warning message asking the user whether it's ok to discard the
configuration from the future.
See #6504
Issue #6420
Store the X-Request-ID in the SyncFileItem and also in the blacklist.
Note that for consistency reason, the X-Request-ID is also in the
SyncFileItem if the request succeeds.
Currently there is no UI to access it, but it can be queried with sql
commands
Hannah von Reth